Order a Brodit Device Holder or Proclip - Use the menu above and decide to find your Holder or Proclip first. This will be Step 1 complete.

 
Then find the Brodit Device Holder or Proclip - from the Step 2 Dropdown on your page. this is the Brodit Two Step Solution complete.

  
 

1 products found       Displaying Page 1 of 1


Brodit Apple iPhone 3G Car Cradle Mount with Pass-Through Connector    #915290

Apple iPhone 2G All Countries / Apple iPhone 3G All Countries / Apple iPhone 3GS All Countries

Our Price: £52.02 (£44.30 ex Vat.)

Item Number: 915290

Discounts available for orders of 10 units or more - call 01484 818860

Stock: 2

Adjustable holder, fits devices with skins.

Holder with pass-through connector. This means that all cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPhone in the holder. (Cable not included)

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 3G Mobile Phone. This is how you fit your Holder with Pass-Through Connector mount onto your proclip. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the holder.



Enlarge image

1. To adjust the holder to your unit: Loosen the screws on the back side of the holder, so the sides of the holders can be adjusted.



Enlarge image

2. Place the unit in the holder and press the sides together so the unit is firmly in place. Screw on the screws on the back side of the holder.




Enlarge image

3. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.



Enlarge image

4. The holder is in place.







Apple iPhone 2G for All Countries
Apple iPhone 3G for All Countries
Apple iPhone 3GS for All Countries






 

 



Once you have added your chosen holder, please select from the menus below to choose a proclip for your vehicle. Making the Brodit Two step solution complete