Brodit Apple iPhone 4 Passive Car Cradle Mount Tilt Swivel #511165

Apple iPhone 4 All Countries / Apple iPhone 4S All Countries

Our Price: 24.71 (21.04 ex Vat.)

Item Number: 511165

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Product Notes:
DOES NOT WORK WITH THE ORIGINAL APPLE IPHONE 4 BUMPER CASE. This Car Cradle Mount is adjustable and is intended to be used for the Apple iPhone 4 with silicone type cases e.g. iSkin, iFrogz, Incipio Jam Jacket, Speck, XtremeMac, Showcase etc

Adjustable Car Cradle Mount. Fits devices with skin (NOT for Apple original Bumper).

Keep your iPhone in a passive Car Cradle Mount on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the Car Cradle Mount.

The Car Cradle Mount is made of black ABS plastic and has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle. The Car Cradle Mount fits for iPhone 4 with skin (does NOT fit for iPhone without skin or with Apple original Bumper.)

The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22 in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.

If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.

These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 4 Mobile Phone. This is how you fit your Passive Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.

Enlarge image

1. To adjust the Car Cradle Mount for your device: Loosen the screws on the back side of the Car Cradle Mount, so the sides of the Car Cradle Mount can be adjusted. Place the device in the Car Cradle Mount and press the sides together so the device is firmly in place. Tighten the screws on the back side of the Car Cradle Mount.

Enlarge image

2. To install the Car Cradle Mount: Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.

Enlarge image

3. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.

Enlarge image

4. The Car Cradle Mount is in place.

Apple iPhone 4 for All Countries
Apple iPhone 4S for All Countries



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.