Brodit Apple iPhone 6S Car Cradle Mount for Cable Attachment #514795

Apple iPhone 6S All Countries Only

Our Price: £40.87 (£34.80 ex Vat.)

Item Number: 514795

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 5

For use with Apple original Lightning to USB Cable. Adjustable Car Cradle Mount. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm.

This Car Cradle Mount for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the Car Cradle Mount, then it connects automatically to your iPhone every time you place the device in the Car Cradle Mount.
 
Note! Cable not included.
The cable attachment Car Cradle Mount can be combined with the Apple original Lightning to USB Cable that came with your iPhone 6s (Apple article. no. MD818AM/A. You can charge you iPhone by connecting it to the car's USB socket, or use it with a USB/cig-plug adapter for the car's 12V socket.
 
To use the Car Cradle Mount, you first set the width to fit for your skin, then you can easily place your iPhone in the Car Cradle Mount. Fits devices with slim sized skins. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).
 
The Car Cradle Mount is made of black ABS plastic. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle. The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 6S Mobile Phone. This is how you fit your Car Cradle Mount for Cable Attachment mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and  look at the pictures before attaching the Car Cradle Mount.  



Enlarge image

1. Place the connector of the cable in the hole in the lower part of the Car Cradle Mount. Carefully press the connector downward and forward so it passes the locking and goes into the hole. Press until you hear/feel the connector snap into place in the Car Cradle Mount.



Enlarge image

2. To adjust the Car Cradle Mount for your device: Loosen the screws on the front side of the Car Cradle Mount, so the sides of the Car Cradle Mount can be adjusted. Place the device in the Car Cradle Mount and press the sides together so the device is firmly in place. Tighten the screws on the front side of the Car Cradle Mount.




Enlarge image

3. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPhone 6S for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.