Brodit Apple iPhone 8 Active Car Cradle Mount for fixed installation #727009

Apple iPhone 8 All Countries Only

Our Price: 91.00 (77.49 ex Vat.)

Item Number: 727009

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

Apple approved charging cable. With tilt swivel. Padded.

Use an active Car Cradle Mount for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active Car Cradle Mount is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. You have full access to the camera and all buttons and outlets when the device is in the Car Cradle Mount. Your iPhone is held securely in place in an upright position for maximum cellular reception.

When you place the iPhone in the Car Cradle Mount, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The Car Cradle Mount is padded. This means it has a plush coating which protects your device from scrathing. The Car Cradle Mount has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle. The Car Cradle Mount fits for bare iPhone without skin/case.

The Car Cradle Mount is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20 and swivels 360. Mounting plate 42x50 mm with AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto Proclip Car Bracket Mount Mounting Platform.

Dimensions: 72 x 90 x 51 mm (W x H x D mm)
Weight: 178 g
Cable length: Total length: 355 cm (Car Cradle Mount to box: 123 cm, Box 8 cm, Box to open end: 224 cm.)

If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.

These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 8 Mobile Phone. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: Connect to a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.

Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.

Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.

Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted.

Enlarge image

4. The Car Cradle Mount is in place.

Apple iPhone 8 for All Countries



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.