Apple

 
 

  
 
 


Brodit Apple iPad Car Cradle Mount for Locking #541139

Apple iPad All Countries / Apple iPad 1 All Countries

Our Price: 38.79 (33.03 ex Vat.)

Item Number: 541139

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Passive Car Cradle Mount with tilt swivel. With spring stud locking.

This Car Cradle Mount is to be used when you want to have your iPad extra securely in place and still have it easy accessable. The Car Cradle Mount is crashtested and approved for use on Brodit's headrest mount.

The Car Cradle Mount is made of extra strong plastic and is equipped with a spring stud locking device. The Car Cradle Mount is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the Car Cradle Mount into desired position.

Film Crash test, front crash.

Film Crash test, rear crash.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad MP3 Player. This is how you fit your Car Cradle Mount for Locking mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the Car Cradle Mount onto the attaching plate. Tighten the screw so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

2. Slide the device sideways carefully into the Car Cradle Mount until you feel that it is properly attached to the connector. Press the spring stud locking device sideways onto the left part of the Car Cradle Mount.




Enlarge image

3. Remove the spring stud locking device by slidning it sideways away from the Car Cradle Mount. Slide the device sideways carefully out of the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place. Switch between portrait and landscape mode by turning the Car Cradle Mount into desired position.







Apple iPad for All Countries
Apple iPad 1 for All Countries






Brodit Apple iPad Car Cradle Mount with lock. #539139

Apple iPad All Countries / Apple iPad 1 All Countries

Our Price: 55.12 (46.94 ex Vat.)

Item Number: 539139

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Passive Car Cradle Mount with tilt swivel. 2 keys included.

This Car Cradle Mount is to be used when you want to secure your iPad and still have it easy accessable. The Car Cradle Mount is crashtested and approved for use on Brodit's headrest mount.

The Car Cradle Mount is also perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. The Car Cradle Mount is made of extra strong plastic and is equipped with a lock. In order to remove the iPad from the Car Cradle Mount you need the key, two keys are included. The Car Cradle Mount is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the Car Cradle Mount into desired position.

Film Crash test, front crash.

Film Crash Test of similar Car Cradle Mount, rear crash.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad MP3 Player. This is how you fit your Car Cradle Mount with lock. mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the Car Cradle Mount onto the attaching plate. Tighten the screw so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

2. Slide the device sideways carefully into the Car Cradle Mount. Press the lock sideways onto the left part of the Car Cradle Mount. Press the button to lock.




Enlarge image

3. Use the enclosed key to open the lock. Remove the lock by slidning it sideways away from the Car Cradle Mount. Slide the device sideways carefully out of the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place. Switch between portrait and landscape mode by turning the Car Cradle Mount into desired position.







Apple iPad for All Countries
Apple iPad 1 for All Countries






Brodit Apple iPad Car Cradle Mount for Cable Attachment #515139

Apple iPad All Countries / Apple iPad 1 All Countries

Our Price: 40.87 (34.80 ex Vat.)

Item Number: 515139

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

For Apple Composite AV Cable. With tilt swivel.

Car Cradle Mount with connector attachment. The choice for you who often connect a connector to your device. The connector is easy to attach to the Car Cradle Mount, and then it connectos to the device automatically when you put your device in the Car Cradle Mount so you do not have to connect it manually each time. (Connector not included)

The Car Cradle Mount is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad MP3 Player. This is how you fit your Car Cradle Mount for Cable Attachment mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. The Car Cradle Mount in the installation pictures may look slightly different from the one you have received. However, the same instructions apply.



Enlarge image

1. Installation of cable: Place the Car Cradle Mount with the frontside upwards. Place the connector into the Car Cradle Mount. The mark pointing upwards, so you can see it when placing the connector into the Car Cradle Mount. Place the lid over the connector, make sure the cable is in the correct position. Screw the lid into place by using the enclosed screws.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.




Enlarge image

3. To place the device in the Car Cradle Mount: Place the lower part of the device in the Car Cradle Mount, then flip/press the upper part forwards so it snaps into place in the Car Cradle Mount Carefully, slide the device sideways into the Car Cradle Mount so you hear/feel it snaps into place. To remove the device from the Car Cradle Mount: Slide it to the left then press upwards on the upper part of the Car Cradle Mount, in the same time pull the upper part of the device out from the Car Cradle Mount and then lift the device up and out from the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place in upright, horizontal position.







Apple iPad for All Countries
Apple iPad 1 for All Countries






Brodit Apple iPad Device Mounting Adapter #215475

Apple iPad All Countries / Apple iPad 2 All Countries / Brodit Accessories All Countries

Our Price: 8.55 (7.28 ex Vat.)

Item Number: 215475

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Mounting adapter for item no. 215462. Screws included. 50x60x8 mm.

Mounting adapter for iPad MultiStand (item no 215462). Is to be used when you want to be able to hang the stand onto more than one place, e.g. onto the kitchen, in the car, in the caravan etc. Screws included. Made of White ABS plastic. Dimensions: 50x60x8 mm.

Multistand demo film

Multistand demo film, Apple iPad version


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad MP3 Player. This is how you fit your Device Mounting Adapter mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.







Apple iPad for All Countries
Apple iPad 2 for All Countries

Brodit Accessories for All Countries






Brodit Apple iPad Table Stand #215462

Apple iPad All Countries / Apple iPad 1 All Countries

Our Price: 47.52 (40.47 ex Vat.)

Item Number: 215462

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

MultiStand. Mounting Adapter and Screws Included. White.

A versatile table stand which is perfect for you who use your iPad in several places. You easily place the iPad in the stand, it is then firmly attached wherever you go! Convenient to use anywhere at home, in the car or in the office.

When using the table stand it is easier to carry the iPad around with you. It diminishes the risk to drop it, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap.

You can attach the stand onto a wall, onto a Proclip Car Bracket Mount in the car or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215475). Color: White.

You can connect e.g. a charging cable to the iPad when it is in place in the stand, all buttons and connectors are easy accessable. You can easily switch between landscape and portrait mode.

Multistand demo film

Multistand demo film, Apple iPad version


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad MP3 Player. This is how you fit your Table Stand mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. The table stand. To install the table stand: Press the mounting adapter on the back side of the Car Cradle Mount downward, so it slides out from the groove. Place the mounting adapter into desired position and screw it into place with the enclosed screws.



Enlarge image

2. Place the iPad above the mounting adapter and press it downward so the mounting adapter fits into the groove. Press until you hear/feel it snaps into place. To remove the Car Cradle Mount: Pull the Car Cradle Mount straight upward, away from the mounting adapter.




Enlarge image

3. To place the iPad in the Car Cradle Mount: Place the lower part of the iPad in the Car Cradle Mount, then flip/press the upper part forward so it snaps into place in the Car Cradle Mount.



Enlarge image

4. To remove the iPad from the Car Cradle Mount: Press upwards on the upper part of the Car Cradle Mount, in the same time pull the upper part of the iPad out from the Car Cradle Mount and then lift it up and out from the Car Cradle Mount.







Apple iPad for All Countries
Apple iPad 1 for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.