Apple

 
 

  
 
 


Our Price: £90.29 (£76.89 ex Vat.)

Item Number: 527793

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 6

With tilt swivel. Apple approved charging cable.

Use an active Car Cradle Mount for your iPad while driving and you will always have a freshly charged battery! The active Car Cradle Mount is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!

12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The Car Cradle Mount is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the Car Cradle Mount into desired position. It is easy to put the iPad into place in the Car Cradle Mount, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. Proclip Car Bracket Mount (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad Mini 4 phones and GPS devices, Proclip Car Bracket Mount is not designed for large devices like tablets. In some vehicles the Proclip Car Bracket Mount has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad Mini 4 MP3 Player. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.  Installation of the Car Cradle Mount: Please read all of the instructions and  look at the pictures before attaching the Car Cradle Mount. 1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted. 4. The Car Cradle Mount is in place.







Apple iPad Mini 4 for All Countries






Our Price: £76.04 (£64.75 ex Vat.)

Item Number: 521793

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

With tilt swivel. With USB cable. Apple approved charging cable.

The choice for a freshly charged battery, a neat and comfortable installation. The Car Cradle Mount is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the Car Cradle Mount, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the Car Cradle Mount's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. The Car Cradle Mount is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
  
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The Proclip Car Bracket Mount is designed for installation of smaller devices (phones), not large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad Mini 4 MP3 Player. This is how you fit your Active Car Cradle Mount with cig-plug mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and  look at the pictures before attaching the Car Cradle Mount.  



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.Slide the device sideways into the Car Cradle Mount until you hear / feel it snaps into place.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPad Mini 4 for All Countries






Our Price: £36.11 (£30.75 ex Vat.)

Item Number: 511793

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

With your iPad Mini 4 in a Car Cradle Mount attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad when it is in the Car Cradle Mount.   
 
The Car Cradle Mount is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the Car Cradle Mount into desired position. It is easy to put the iPad into place in the Car Cradle Mount, and to take it with you when leaving the car.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad Mini 4 MP3 Player. This is how you fit your Passive Car Cradle Mount with tilt swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.




Enlarge image

3. To place the device in the Car Cradle Mount: Place the lower part of the device in the Car Cradle Mount, then flip/press the upper part forwards so it snaps into place in the Car Cradle Mount. To remove the device from the Car Cradle Mount: Press upwards on the upper part of the Car Cradle Mount, in the same time pull the upper part of the device out from the Car Cradle Mount and then lift the device up and out from the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPad Mini 4 for All Countries






Brodit Apple iPad Mini 4 MultiStand #215781

Please view compatibility tab below

Our Price: £18.33 (£15.61 ex Vat.)

Item Number: 215781

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

MultiStand support leg, for smaller surfpads. Length: 98 mm. Mounting Adapter and Screws Included. Black.

This support leg is to be used then you want to convert your current Car Cradle Mount into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new Car Cradle Mount!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 98 mm long and fits best with smaller surfpads.
 
Tablets should not be installed onto a car's dashboard. The Proclip Car Bracket Mount is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
MultiStand film!
 
 


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad Mini 4 MP3 Player. This is how you fit your MultiStand mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.  



Enlarge image

1. Remove the tilt swivel from the Car Cradle Mount by loosing the screws on the front of the Car Cradle Mount.



Enlarge image

2. Place the MultiStand support leg so it fits with the holdes that used to hold the tilt swivel into place. Fasten the MultiStand support leg using the enclosed screws.




Enlarge image

3. To install the multi stand: Press the mounting adapter on the back side of the Car Cradle Mount downward, so it slides out from the groove. Place the mounting adapter into desired position and screw it into place with the enclosed screws. Place the Car Cradle Mount above the mounting adapter and press it downward so the mounting adapter fits into the groove. Press until you hear/feel it snaps into place. To remove the Car Cradle Mount: Pull the Car Cradle Mount straight upward, away from the mounting adapter.



Enlarge image

4. The Car Cradle Mount is in place in horizontal position.







Amazon Kindle Fire for All Countries
Amazon Kindle Fire HD 7.0 for All Countries
Amazon Kindle Fire HD 8.9 for All Countries
Amazon Kindle Fire HD 8.9 LTE for All Countries
Amazon Kindle Fire HDX 7.0 for All Countries
Amazon Kindle Fire HDX 8.9 for All Countries

Apple iPad Mini for All Countries
Apple iPad Mini 3 for All Countries
Apple iPad Mini 4 for All Countries
Apple iPad Mini Retina for All Countries

Asus Google Nexus 7 for All Countries
Asus Google Nexus 7 (2013) for All Countries

BlackBerry PlayBook for All Countries

Brodit Accessories for All Countries

Google Nexus 7 for All Countries
Google Nexus 7 (2013) for All Countries

HTC Flyer for All Countries
HTC Nexus 9 for All Countries

Huawei MediaPad for All Countries
Huawei MediaPad M1 8.0 for All Countries
Huawei MediaPad S7-301u for All Countries
Huawei MediaPad T1 8.0 for All Countries

Kindle Fire for All Countries
Kindle Fire HD 7.0 for All Countries
Kindle Fire HD 8.9 for All Countries
Kindle Fire HDX 8.9 for All Countries
Kindle HD 8.9 LTE for All Countries

LG G Pad 7.0 for All Countries
LG G Pad F 8.0 for All Countries

Mitac Ulmo for All Countries

Nexus 7 for All Countries
Nexus 7 (2013) for All Countries
Nexus 9 for All Countries

Pidion BP50 for All Countries

Samsung Galaxy Note 8.0 GT-N5110 for All Countries
Samsung Galaxy Note 8.0 GT-N5120 for All Countries
Samsung Galaxy Tab 2 7.0 for All Countries
Samsung Galaxy Tab 3 7.0 SM-T2100 for All Countries
Samsung Galaxy Tab 3 7.0 SM-T2110 for All Countries
Samsung Galaxy Tab 3 8.0 SM-T3100 for All Countries
Samsung Galaxy Tab 3 8.0 SM-T3150 for All Countries
Samsung Galaxy Tab 3 Lite for All Countries
Samsung Galaxy Tab 4 7.0 SM-T230 for All Countries
Samsung Galaxy Tab 4 7.0 SM-T231 for All Countries
Samsung Galaxy Tab 4 7.0 SM-T235 for All Countries
Samsung Galaxy Tab 4 8.0 SM-T335 for All Countries
Samsung Galaxy Tab 7.0 Plus GT-P6200 for All Countries
Samsung Galaxy Tab 7.7 GT-P6800 for All Countries
Samsung Galaxy Tab 8.9 GT-P7300 for All Countries
Samsung Galaxy Tab A 8.0 for All Countries
Samsung Galaxy Tab Active 8.0 SM-T365 for All Countries
Samsung Galaxy Tab E 8.0 for All Countries
Samsung Galaxy Tab GT-P1000 for All Countries
Samsung Galaxy Tab PRO 8.4 SM-T320 for All Countries
Samsung Galaxy Tab PRO 8.4 SM-T325 for All Countries
Samsung Galaxy Tab S 8.4 SM-T700 for All Countries
Samsung Galaxy Tab S 8.4 SM-T705 for All Countries
Samsung Galaxy Tab S2 8.0 for All Countries

Sony Xperia Tablet Z for All Countries
Sony Xperia Z2 Tablet for All Countries

Verizon Ellipsis 7 for USA

ViewSonic ViewPad 7 for All Countries

Zebra ET50 8.3 for All Countries
Zebra ET55 8.3 for All Countries

ZTE Light V9 for All Countries
ZTE Optik for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.