Apple

 
 

  
 
 


Brodit Apple iPad New (3rd Gen) MultiStand #215780

Please view compatibility tab below

Our Price: 36.11 (30.75 ex Vat.)

Item Number: 215780

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.

This support leg is to be used then you want to convert your current Car Cradle Mount into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new Car Cradle Mount!

When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.

You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).

The support leg is 120 mm long and fits best with larger surfpads.

Tablets should not be installed onto a car's dashboard. The Proclip Car Bracket Mount is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

MultiStand film!


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad New (3rd Gen) MP3 Player. This is how you fit your MultiStand mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Remove the tilt swivel from the Car Cradle Mount by loosing the screws on the front of the Car Cradle Mount.



Enlarge image

2. Place the MultiStand support leg so it fits with the holdes that used to hold the tilt swivel into place. Fasten the MultiStand support leg using the enclosed screws.




Enlarge image

3. To install the multi stand: Press the mounting adapter on the back side of the Car Cradle Mount downward, so it slides out from the groove. Place the mounting adapter into desired position and screw it into place with the enclosed screws. Place the Car Cradle Mount above the mounting adapter and press it downward so the mounting adapter fits into the groove. Press until you hear/feel it snaps into place. To remove the Car Cradle Mount: Pull the Car Cradle Mount straight upward, away from the mounting adapter.



Enlarge image

4. The Car Cradle Mount is in place in horizontal position.







Apple iPad 1 for All Countries
Apple iPad 2 for All Countries
Apple iPad Air for All Countries
Apple iPad Air 2 for All Countries
Apple iPad New (3rd Gen) for All Countries
Apple iPad New 4th Gen for All Countries
Apple iPad New with Retina (Lightning Connector) for All Countries
Apple iPad Pro for All Countries
Apple iPad Pro 12.9 for All Countries
Apple iPad Pro 9.7 for All Countries

Asus Eee Pad Transformer TF101 for All Countries

Brodit Accessories for All Countries

Dell Latitude 10 - ST2 for All Countries
Dell Latitude ST 10-1inch for All Countries
Dell Venue 11 Pro (Model 5130) for All Countries
Dell Venue 11 Pro- New (Model 7140) for All Countries
Dell Venue 8 Pro for All Countries

HP ElitePad 1000 10.1 for All Countries
HP ElitePad 900 10.1 for All Countries

Microsoft Surface for All Countries
Microsoft Surface 2 for All Countries
Microsoft Surface 3 for All Countries
Microsoft Surface PRO for All Countries
Microsoft Surface Pro 2 for All Countries
Microsoft Surface Pro 3 for All Countries

Motorola ET1 for All Countries
Motorola Xoom for All Countries

Paddytek Paddy-T V2 for All Countries

Panasonic Toughpad FZ-A1 for All Countries
Panasonic Toughpad FZ-G1 for All Countries

Samsung Galaxy Note 10.1 (2014 Edition) SM-P6000 for All Countries
Samsung Galaxy Note 10.1 (2014 Edition) SM-P6050 for All Countries
Samsung Galaxy Note 10.1 GT-N8000 for All Countries
Samsung Galaxy Note 10.1 GT-N8020 for All Countries
Samsung Galaxy Note PRO 12.2 4G SM-P905 for All Countries
Samsung Galaxy Note PRO 12.2 Wi-Fi SM-P900 for All Countries
Samsung Galaxy Tab 10.1 GT-P7500 for All Countries
Samsung Galaxy Tab 10.1 SCH-I905 for USA
Samsung Galaxy Tab 2 10.1 for All Countries
Samsung Galaxy Tab 3 10.1 GT-P5200 for All Countries
Samsung Galaxy Tab 3 10.1 GT-P5210 for All Countries
Samsung Galaxy Tab 3 10.1 GT-P5220 for All Countries
Samsung Galaxy Tab 4 10.1 SM-T530 for All Countries
Samsung Galaxy Tab 4 10.1 SM-T531 for All Countries
Samsung Galaxy Tab 4 10.1 SM-T535 for All Countries
Samsung Galaxy Tab A 9.7 for All Countries
Samsung Galaxy Tab E 9.6 for All Countries
Samsung Galaxy Tab PRO 10.1 LTE SM-T525 for All Countries
Samsung Galaxy Tab PRO 10.1 SM-T520 for All Countries
Samsung Galaxy Tab PRO 12.2 4G SM-T905 for All Countries
Samsung Galaxy Tab PRO 12.2 Wi-Fi SM-T900 for All Countries
Samsung Galaxy Tab S 10.5 SM-T800 for All Countries
Samsung Galaxy Tab S 10.5 SM-T805 for All Countries
Samsung Galaxy Tab S2 9.7 for All Countries

Sony Xperia Z3 Tablet Compact for All Countries
Sony Xperia Z4 Tablet for All Countries

Zebra ET50 10.1 for All Countries
Zebra ET55 10.1 for All Countries






Brodit Apple iPad New (3rd Gen) Car Cradle Mount with lock. #539541

Apple iPad 2 All Countries / Apple iPad New (3rd Gen) All Countries / Apple iPad New 4th Gen All Countries / Apple iPad New with Retina (Lightning Connector) All Countries

Our Price: 49.46 (42.12 ex Vat.)

Item Number: 539541

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Passive Car Cradle Mount with tilt swivel. 2 keys included. For iZettle card reader.

This Car Cradle Mount is to be used when you want to secure your iPad and still have it easy accessable.

The Car Cradle Mount is also perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. The Car Cradle Mount is made of extra strong plastic and is equipped with a lock. In order to remove the iPad from the Car Cradle Mount you need the key, two keys are included. The Car Cradle Mount is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the Car Cradle Mount into desired position.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. Proclip Car Bracket Mount (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad New (3rd Gen) phones and GPS devices, Proclip Car Bracket Mount is not designed for large devices like tablets. In some vehicles the Proclip Car Bracket Mount has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad New (3rd Gen) MP3 Player. This is how you fit your Car Cradle Mount with lock. mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Place the iZettle card reader in its compartment. Put the lid on and lock the compartment with the enclosed screws. Place the lock in the hole and fasten it using a wrench.



Enlarge image

2. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the Car Cradle Mount onto the attaching plate. Tighten the screw so the Car Cradle Mount is firmly in place, but still can be adjusted.




Enlarge image

3. Slide the device sideways carefully into the Car Cradle Mount. Press the lock sideways onto the left part of the Car Cradle Mount. Press the button to lock. Use the enclosed key to open the lock. Remove the lock by slidning it sideways away from the Car Cradle Mount. Slide the device sideways carefully out of the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place. Switch between portrait and landscape mode by turning the Car Cradle Mount into desired position.







Apple iPad 2 for All Countries
Apple iPad New (3rd Gen) for All Countries
Apple iPad New 4th Gen for All Countries
Apple iPad New with Retina (Lightning Connector) for All Countries






Brodit Apple iPad New (3rd Gen) Car Cradle Mount for Locking #541517

Apple iPad 2 All Countries / Apple iPad New (3rd Gen) All Countries / Apple iPad New 4th Gen All Countries / Apple iPad New with Retina (Lightning Connector) All Countries

Our Price: 66.54 (56.66 ex Vat.)

Item Number: 541517

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Passive Car Cradle Mount with tilt swivel. With spring stud locking. For Lifeproof Case.

This Car Cradle Mount is to be used when you want to have your iPad extra securely in place and still have it easy accessable.

The Car Cradle Mount is made of extra strong plastic and is equipped with a spring stud locking device. The Car Cradle Mount is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the Car Cradle Mount into desired position.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. Proclip Car Bracket Mount (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad New (3rd Gen) phones and GPS devices, Proclip Car Bracket Mount is not designed for large devices like tablets. In some vehicles the Proclip Car Bracket Mount has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad New (3rd Gen) MP3 Player. This is how you fit your Car Cradle Mount for Locking mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the Car Cradle Mount onto the attaching plate. Tighten the screw so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

2. Slide the device sideways carefully into the Car Cradle Mount. Press the spring stud locking device sideways onto the right part of the Car Cradle Mount.




Enlarge image

3. Remove the spring stud locking device by slidning it sideways away from the Car Cradle Mount. Slide the device sideways carefully out of the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place. Switch between portrait and landscape mode by turning the Car Cradle Mount into desired position.







Apple iPad 2 for All Countries
Apple iPad New (3rd Gen) for All Countries
Apple iPad New 4th Gen for All Countries
Apple iPad New with Retina (Lightning Connector) for All Countries






Brodit Apple iPad New (3rd Gen) Car Cradle Mount with external antenna connection #544404

Apple iPad 2 All Countries / Apple iPad New (3rd Gen) All Countries

Our Price: 115.42 (98.29 ex Vat.)

Item Number: 544404

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Passive Car Cradle Mount with tilt swivel.

Brodit's Car Cradle Mount with external antenna connection provides a considerably better and more reliable Apple iPad New (3rd Gen) coverage. Works both in rural as in urban areas, in vehicles and in buildings.

Attach an external antenna onto your vehicle or in your window and connect it to the antenna cable attached to the Car Cradle Mount (external antenna is not included). The external antenna will pick up on even the faintest signal, too weak to be recognized by your iPad. The signal is then transmitted wirelessly to your iPad via the built-in inductive antenna. It can take a while for your iPad to find the signal after placing it in the Car Cradle Mount (maximum 1 minute). You can connect e.g. a charging cable to the iPad when it is in the Car Cradle Mount.

The Car Cradle Mount is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The Proclip Car Bracket Mount is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad New (3rd Gen) MP3 Player. This is how you fit your Car Cradle Mount with external antenna connection mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.




Enlarge image

3. To place the device in the Car Cradle Mount: Place the lower part of the device in the Car Cradle Mount, then flip/press the upper part forwards so it snaps into place in the Car Cradle Mount. To remove the device from the Car Cradle Mount: Press upwards on the upper part of the Car Cradle Mount, in the same time pull the upper part of the device out from the Car Cradle Mount and then lift the device up and out from the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPad 2 for All Countries
Apple iPad New (3rd Gen) for All Countries






Our Price: 114.06 (97.13 ex Vat.)

Item Number: 535395

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Active Car Cradle Mount with cig-plug and USB cable. With tilt swivel. 2 keys included. For OtterBox Defender Series.

This Car Cradle Mount is to be used when you will secure your iPad and still have it easy accessable. Perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. In order to remove the unit from the Car Cradle Mount you need the key or a certain amount of violence is required. The Car Cradle Mount includes a lock and two keys.

The active Car Cradle Mount charges your battery when it is in the Car Cradle Mount. The Car Cradle Mount is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. Proclip Car Bracket Mount (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad New (3rd Gen) phones and GPS devices, Proclip Car Bracket Mount is not designed for large devices like tablets. In some vehicles the Proclip Car Bracket Mount has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad New (3rd Gen) MP3 Player. This is how you fit your Car Cradle Mount with lock. mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the Car Cradle Mount onto the attaching plate. Tighten the screw so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

2. Slide the device sideways carefully into the Car Cradle Mount. Press the lock sideways onto the left part of the Car Cradle Mount. Press the button to lock.




Enlarge image

3. Use the enclosed key to open the lock. Remove the lock by slidning it sideways away from the Car Cradle Mount. Slide the device sideways carefully out of the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place. Switch between portrait and landscape mode by turning the Car Cradle Mount into desired position.







Apple iPad New (3rd Gen) for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.