Apple

 
 

  
 
 


Our Price: £91.99 (£78.34 ex Vat.)

Item Number: 527977

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel. Apple approved charging cable.

Use an active Car Cradle Mount for your iPad while driving and you will always have a freshly charged battery! The active Car Cradle Mount is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!
 
12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.
 
The Car Cradle Mount is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the Car Cradle Mount into desired position. It is easy to put the iPad into place in the Car Cradle Mount, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. Proclip Car Bracket Mount (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, Proclip Car Bracket Mount is not designed for large devices like tablets. In some vehicles the Proclip Car Bracket Mount has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad Pro 10.5 (A1701 A1709) MP3 Player. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Important Note: Connect to a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.  Installation of the Car Cradle Mount: Please read all of the instructions and  look at the pictures before attaching the Car Cradle Mount. 1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.Slide the device sideways into the Car Cradle Mount until you hear / feel it snaps into place. 3. To place the device in the Car Cradle Mount: Slide it straight sideways into the Car Cradle Mount so it connects to the connector. To remove the device from the Car Cradle Mount: Slide it straight sideways out from the Car Cradle Mount. 4. The Car Cradle Mount is in place.    







Apple iPad Pro 10.5 (A1701 A1709) for All Countries






Our Price: £79.00 (£67.27 ex Vat.)

Item Number: 521977

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With USB-cable with cig-plug adapter. Apple approved charging cable. With tilt swivel

Use an active Car Cradle Mount for your iPad while driving and you will always have a freshly charged battery! The Car Cradle Mount provides a neat and comfortable installation -safe and convenient. The Car Cradle Mount is equipped with an apple approved USB-cable with cig-plug adapter. You can choose to connect the cig-plug to the car's 12 Volt socket, or to remove the cig-plug adapter and connect the USB cable to the car's (or stereo's) USB connector.
 
Length of charging cable: 132 cm, inlc cigg-plugg
 
Important note! In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The Car Cradle Mount is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.
 
Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The Proclip Car Bracket Mount is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad Pro 10.5 (A1701 A1709) MP3 Player. This is how you fit your Active Car Cradle Mount with cig-plug mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and  look at the pictures before attaching the Car Cradle Mount.  



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.




Enlarge image

3. To place the device in the Car Cradle Mount: Slide it straight sideways into the Car Cradle Mount so it connects to the connector.



Enlarge image

4. The Car Cradle Mount is in place.



 





Apple iPad Pro 10.5 (A1701 A1709) for All Countries






Our Price: £34.00 (£28.95 ex Vat.)

Item Number: 511977

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With your iPad in a Car Cradle Mount attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad when it is in the Car Cradle Mount.

The Car Cradle Mount is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the Car Cradle Mount into desired position. It is easy to put the iPad into place in the Car Cradle Mount, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a carís dashboard if they block the view or block key controls. Proclip Car Bracket Mount (Broditís vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, Proclip Car Bracket Mount is not designed for large devices like tablets. In some vehicles the Proclip Car Bracket Mount has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the carís dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicleís dashboard is always done on the customerís own responsibility. Brodit recommends to use tablets on the carís headrest, installed onto a Brodit headrest mount.

Dimensions: 260 x 180 x 55 mm (W x H x D mm)
Weight: 163 g


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPad Pro 10.5 (A1701 A1709) MP3 Player. This is how you fit your Passive Car Cradle Mount with tilt swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.




Enlarge image

3. To place the device in the Car Cradle Mount: Place the lower part of the device in the Car Cradle Mount, then flip/press the upper part forwards so it snaps into place in the Car Cradle Mount. To remove the device from the Car Cradle Mount: Press upwards on the upper part of the Car Cradle Mount, in the same time pull the upper part of the device out from the Car Cradle Mount and then lift the device up and out from the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPad Pro 10.5 (A1701 A1709) for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.