Apple

 
 

  
 
 


Brodit Apple iPhone 4S Passive Car Cradle Mount with tilt swivel #511515

Apple iPhone 4 All Countries / Apple iPhone 4S All Countries

Our Price: 24.71 (21.04 ex Vat.)

Item Number: 511515

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

Fits Devices with Lifeproof Case.

Keep your iPhone in a passive Car Cradle Mount on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the Car Cradle Mount.

The Car Cradle Mount is made of black ABS plastic and has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle. The Car Cradle Mount fits for iPhone 4 with Lifeproof Case (does NOT fit for iPhone without or with a different skin.)

The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22 in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 4S Mobile Phone. This is how you fit your Passive Car Cradle Mount with tilt swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPhone 4 for All Countries
Apple iPhone 4S for All Countries






Brodit Apple iPhone 4S Passive Car Cradle Mount with tilt swivel #511511

Apple iPhone 4 All Countries / Apple iPhone 4S All Countries

Our Price: 24.71 (21.04 ex Vat.)

Item Number: 511511

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

For Otterbox Armor Series.

When keeping your smartphone in a passive Car Cradle Mount, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the Car Cradle Mount. The Car Cradle Mount is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 4S Mobile Phone. This is how you fit your Passive Car Cradle Mount with tilt swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the tilt swivel fits. Screw the Car Cradle Mount onto the attaching plate.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPhone 4 for All Countries
Apple iPhone 4S for All Countries






Our Price: 76.04 (64.75 ex Vat.)

Item Number: 521410

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel. With USB cable. Apple approved charging cable. Fits devices with or without skin.

Use an active Car Cradle Mount for your Apple device on the road and you will always have a freshly charged battery! In addition, you will always have your device within easy sight and reach. Safe, comfortable and convenient! The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your device is held securely in place in an upright position for maximum cellular reception.

The Car Cradle Mount is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the device in the Car Cradle Mount, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the Car Cradle Mount's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

The Car Cradle Mount is made of black plastic and has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle. The Car Cradle Mount fits for devices with or without skin.

The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22 in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 4S Mobile Phone. This is how you fit your Active Car Cradle Mount with cig-plug. mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.




Enlarge image

3. To place the device in the Car Cradle Mount: Place the upper part of the device in the Car Cradle Mount, then press the device forwards and upwards so it snaps into place in the Car Cradle Mount. To remove the device from the Car Cradle Mount: Press upwards on the lower part of the device, in the same time pull the the device out and down from the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPhone 3G for All Countries
Apple iPhone 3GS for All Countries
Apple iPhone 4 for All Countries
Apple iPhone 4S for All Countries
Apple iPod Touch for All Countries
Apple iPod Touch 2nd Generation for All Countries
Apple iPod Touch 3rd Generation for All Countries
Apple iPod Touch 4th Generation for All Countries






Our Price: 85.55 (72.85 ex Vat.)

Item Number: 527410

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

With tilt swivel. Fits devices with or without skin. Apple approved charging cable.

Use an active Car Cradle Mount for your Apple device on the road and you will always have a freshly charged battery! In addition, you will always have your device within easy sight and reach. Safe, comfortable and convenient! The active Car Cradle Mount is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your device is held securely in place in an upright position for maximum cellular reception.

When you place the device in the Car Cradle Mount, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The Car Cradle Mount is made of black Acetal plastic and has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle. The Car Cradle Mount fits for devices with or without skin.

The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22 in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 4S Mobile Phone. This is how you fit your Active Car Cradle Mount for fixed installation. mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Note: If you are connecting a GPS/Data device to the Car Cradle Mount please ensure the charger unit is located in a position within easy reach of any GPS or charging adapters. Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Attaching the Car Cradle Mount: 1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted. 3. To place the device in the Car Cradle Mount: Place the upper part of the device in the Car Cradle Mount, then press the device forwards and upwards so it snaps into place in the Car Cradle Mount. To remove the device from the Car Cradle Mount: Press upwards on the lower part of the device, in the same time pull the the device out and down from the Car Cradle Mount. 4. The Car Cradle Mount is in place.







Apple iPhone 3G for All Countries
Apple iPhone 3GS for All Countries
Apple iPhone 4 for All Countries
Apple iPhone 4S for All Countries
Apple iPod Touch for All Countries
Apple iPod Touch 2nd Generation for All Countries
Apple iPod Touch 3rd Generation for All Countries
Apple iPod Touch 4th Generation for All Countries






Brodit Apple iPhone 4S Car Cradle Mount with external antenna connection #549399

Apple iPhone 4 All Countries / Apple iPhone 4S All Countries

Our Price: 95.05 (80.94 ex Vat.)

Item Number: 549399

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Active Car Cradle Mount for fixed installation, with tilt swivel. Fits for devices WITHOUT skin. Built-in inductive antenna (FME-male). MultiMoveClip and screws included.

Brodit's Car Cradle Mount with external antenna connection provides a considerably better and more reliable Apple iPhone 4S coverage. Works both in rural as in urban areas, in vehicles and in buildings.

Attach an external antenna onto your vehicle or in your window and connect it to the antenna cable attached to the Car Cradle Mount (external antenna is not included). The external antenna will pick up on even the faintest signal, too weak to be recognized by your device. The signal is then transmitted wirelessly to your device via the built-in inductive antenna. It can take a while for your device to find the signal after placing it in the Car Cradle Mount (maximum 1 minute). The Car Cradle Mount also charges your device, it comes with a straight cable for fixed installation. This gives a neat installation without cables hanging over the interior. Professional installation recommended.

The Car Cradle Mount is equipped with a tilt swivel and is to be mounted into a MultiMoveClip which you attach onto Proclip Car Bracket Mount Mounting Platform for a safe, convenient in your vehicle. Also perfect for use in boats and summer houses. The Car Cradle Mount is developed and produced in Sweden. Made of black Acetal plastic. Pattern protected RCD 00199475 + RCD 002001164. Please see leaflet for more information.

- Fits devices WITHOUT skin (does not fit devices with skin)
- For fixed installation, 12V
- With external antenna connection (FME-male) (external antenna not included)
- Built-in inductive antenna
- Apple aprroved cable
-Tilt swivel, adjustable 15
- Designed and manufactured in Sweden


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 4S Mobile Phone. This is how you fit your Car Cradle Mount with external antenna connection mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Note: If you are connecting a GPS/Data device to the Car Cradle Mount please ensure the charger unit is located in a position within easy reach of any GPS or charging adapters. Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Attaching the Car Cradle Mount: 1. Place the MultiMoveClip onto the desired position. 2. Screw the MultiMoveClip into place with the enclosed screws. 3. Attach the Car Cradle Mount by sliding it straight downward into the MultiMoveClip so you hear/feel it snaps into place. Remove the Car Cradle Mount by pressing the latch on the MultiMoveClip and pressing/lifting the Car Cradle Mount straight upward and out of the MultiMoveClip. 4. The Car Cradle Mount is in place.







Apple iPhone 4 for All Countries
Apple iPhone 4S for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.