Apple

 
 

  
 
 


Our Price: £91.00 (£77.49 ex Vat.)

Item Number: 727009

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Apple approved charging cable. With tilt swivel. Padded.

Use an active Car Cradle Mount for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active Car Cradle Mount is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. You have full access to the camera and all buttons and outlets when the device is in the Car Cradle Mount. Your iPhone is held securely in place in an upright position for maximum cellular reception.
 
When you place the iPhone in the Car Cradle Mount, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.
 
The Car Cradle Mount is padded. This means it has a plush coating which protects your device from scrathing. The Car Cradle Mount has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle. The Car Cradle Mount fits for bare iPhone without skin/case.
 
The Car Cradle Mount is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto Proclip Car Bracket Mount Mounting Platform.
 
Dimensions: 72 x 90 x 51 mm (W x H x D mm)
Weight: 178 g
Cable length: Total length: 355 cm (Car Cradle Mount to box: 123 cm, Box 8 cm, Box to open end: 224 cm.)


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 8 Mobile Phone. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: Connect to a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPhone 8 for All Countries






Our Price: £63.99 (£54.49 ex Vat.)

Item Number: 721009

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

With USB cable and cig-plug adapter. Apple approved charging cable. With tilt swivel. Padded.

Use an active Car Cradle Mount for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. You have full access to the camera and all buttons and outlets when the device is in the Car Cradle Mount. The iPhone is held securely in place in an upright position for maximum cellular reception.
 
The Car Cradle Mount is equipped with an Apple approved cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the Car Cradle Mount, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug adapter from the Car Cradle Mount's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The Car Cradle Mount is padded. This means it has a plush coating which protects your device from scrathing. The Car Cradle Mount has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle. The Car Cradle Mount fits for bare iPhone without skin/case.
 
The Car Cradle Mount is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto Proclip Car Bracket Mount Mounting Platform.
 
Dimensions: 72 x 90 x 51 mm (W x H x D mm)
Weight: 124 g
Cable length: 132 cm


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 8 Mobile Phone. This is how you fit your Active Car Cradle Mount with cig-plug mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPhone 8 for All Countries






Our Price: £42.99 (£36.61 ex Vat.)

Item Number: 714009

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

For use with Apple original Lightning to USB Cable. With tilt swivel. Padded

This Car Cradle Mount for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the Car Cradle Mount, then it automatically connects to your iPhone every time you place the device in the Car Cradle Mount. You have full access to the camera and all buttons and outlets when the device is in the Car Cradle Mount. The iPhone is held securely in place in an upright position for maximum cellular reception.
 
Note! Cable not included.
The cable attachment Car Cradle Mount can be combined with the Apple original Lightning to USB Cable that came with your iPhone (Apple article. no. MD818AM/A. You can charge you iPhone by connecting it to the car’s USB socket, or use it with a USB/cig-plug adapter for the car’s 12V socket.
 
The Car Cradle Mount is padded. This means it has a plush coating which protects your device from scrathing. The Car Cradle Mount has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle. The Car Cradle Mount fits for bare iPhone without skin/case.
 
The Car Cradle Mount is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto Proclip Car Bracket Mount Mounting Platform.
 
Dimensions: 72 x 90 x 51 mm (W x H x D mm)
Weight: 74 g
 
 


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 8 Mobile Phone. This is how you fit your Car Cradle Mount for Cable Attachment mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before installing.  



Enlarge image

1. Place the connector of the cable in the hole in the lower part of the Car Cradle Mount. Carefully press the connector upward so it passes the notches and goes all the way into the hole. Press until you hear/feel the connector snap into place in the Car Cradle Mount.



Enlarge image

2. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.




Enlarge image

3. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPhone 8 for All Countries






Our Price: £24.71 (£21.04 ex Vat.)

Item Number: 711009

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 6

Padded.

Keep your iPhone in a passive Car Cradle Mount on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. You have full access to the camera and all buttons and outlets when the device is in the Car Cradle Mount. The iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the Car Cradle Mount.
 
The Car Cradle Mount is padded. This means it has a plush coating which protects your device from scrathing. The Car Cradle Mount has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle. The Car Cradle Mount fits for bare iPhone without skin/case.
 
The Car Cradle Mount is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto Proclip Car Bracket Mount Mounting Platform.
 
Dimensions: 72 x 79 x 51 mm (W x H x D mm)
Weight: 65 g
 
 


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 8 Mobile Phone. This is how you fit your Passive Car Cradle Mount with tilt swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPhone 8 for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.