Apple

 
 

  
 
 


Brodit Apple iPhone SE Active Car Cradle Mount for fixed installation #527512

Apple iPhone 5 All Countries / Apple iPhone 5S All Countries / Apple iPhone SE All Countries

Our Price: 78.89 (67.18 ex Vat.)

Item Number: 527512

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

With tilt swivel. Apple approved charging cable. For Griffin Survivor All-Terrain Case.

Use an active Car Cradle Mount for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active Car Cradle Mount is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

When you place the iPhone in the Car Cradle Mount, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The Car Cradle Mount is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The Car Cradle Mount has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone SE Mobile Phone. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. How to mount the Car Cradle Mount: 1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the Car Cradle Mount over the attaching plate so the tilt swivel fits. Screw the Car Cradle Mount onto the attaching plate. 4. The Car Cradle Mount is in place.







Apple iPhone 5 for All Countries
Apple iPhone 5S for All Countries
Apple iPhone SE for All Countries






Brodit Apple iPhone SE Active Car Cradle Mount for fixed installation #527504

Apple iPhone 5 All Countries / Apple iPhone 5C All Countries / Apple iPhone 5S All Countries / Apple iPhone SE All Countries

Our Price: 77.94 (66.37 ex Vat.)

Item Number: 527504

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 5

With tilt swivel. Adjustable Car Cradle Mount. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. Apple approved charging cable.

Use an active Car Cradle Mount for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active Car Cradle Mount is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

When you place the iPhone in the Car Cradle Mount, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The Car Cradle Mount is made of black ABS plastic and has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle.

Fits devices with "rugged" sized skins (not standard or slim size). Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22 in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone SE Mobile Phone. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Attaching the Car Cradle Mount: 1. To adjust the Car Cradle Mount for your device: Loosen the screws on the front side of the Car Cradle Mount, so the sides of the Car Cradle Mount can be adjusted. Place the device in the Car Cradle Mount and press the sides together so the device is firmly in place. Tighten the screws on the front side of the Car Cradle Mount. 2. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted. 4. The Car Cradle Mount is in place.







Apple iPhone 5 for All Countries
Apple iPhone 5C for All Countries
Apple iPhone 5S for All Countries
Apple iPhone SE for All Countries






Brodit Apple iPhone SE Active Car Cradle Mount for fixed installation #527503

Apple iPhone 5 All Countries / Apple iPhone 5C All Countries / Apple iPhone 5S All Countries / Apple iPhone SE All Countries

Our Price: 77.94 (66.37 ex Vat.)

Item Number: 527503

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel. Adjustable Car Cradle Mount. Fits devices with skin that has the following dimensions: Width: 59-63 mm, Thickness: 6-10 mm. Apple approved charging cable.

Use an active Car Cradle Mount for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active Car Cradle Mount is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

When you place the iPhone in the Car Cradle Mount, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The Car Cradle Mount is made of black ABS plastic and has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle.

Fits devices with slim sized skins (not "standard" or rugged size). Fits devices with skin that has the following dimensions: Width: 59-63 mm, Thickness: 6-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22 in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone SE Mobile Phone. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Attaching the Car Cradle Mount: 1. To adjust the Car Cradle Mount for your device: Loosen the screws on the front side of the Car Cradle Mount, so the sides of the Car Cradle Mount can be adjusted. Place the device in the Car Cradle Mount and press the sides together so the device is firmly in place. Tighten the screws on the front side of the Car Cradle Mount. 2. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted. 4. The Car Cradle Mount is in place.







Apple iPhone 5 for All Countries
Apple iPhone 5C for All Countries
Apple iPhone 5S for All Countries
Apple iPhone SE for All Countries






Brodit Apple iPhone SE Active Car Cradle Mount for fixed installation #527502

Apple iPhone 5 All Countries / Apple iPhone 5C All Countries / Apple iPhone 5S All Countries / Apple iPhone SE All Countries

Our Price: 77.94 (66.37 ex Vat.)

Item Number: 527502

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 4

With tilt swivel. Adjustable Car Cradle Mount. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. Apple approved charging cable.

Use an active Car Cradle Mount for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active Car Cradle Mount is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

When you place the iPhone in the Car Cradle Mount, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The Car Cradle Mount is made of black ABS plastic and has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle.

Fits devices with "standard" sized skins (not rugged or slim size). Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22 in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone SE Mobile Phone. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Attaching the Car Cradle Mount: 1. To adjust the Car Cradle Mount for your device: Loosen the screws on the front side of the Car Cradle Mount, so the sides of the Car Cradle Mount can be adjusted. Place the device in the Car Cradle Mount and press the sides together so the device is firmly in place. Tighten the screws on the front side of the Car Cradle Mount. 2. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted. 4. The Car Cradle Mount is in place.







Apple iPhone 5 for All Countries
Apple iPhone 5C for All Countries
Apple iPhone 5S for All Countries
Apple iPhone SE for All Countries






Brodit Apple iPhone SE Active Car Cradle Mount for fixed installation #527501

Apple iPhone 5 All Countries / Apple iPhone 5S All Countries / Apple iPhone SE All Countries

Our Price: 76.04 (64.75 ex Vat.)

Item Number: 527501

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel. Padded. Apple approved charging cable.

Use an active Car Cradle Mount for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active Car Cradle Mount is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

When you place the iPhone in the Car Cradle Mount, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The Car Cradle Mount is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The Car Cradle Mount has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle.

The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22 in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone SE Mobile Phone. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Installation of the Car Cradle Mount: 1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. 3. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted. 4. The Car Cradle Mount is in place.







Apple iPhone 5 for All Countries
Apple iPhone 5S for All Countries
Apple iPhone SE for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.