Apple

 
 

  
 
 


Brodit Apple iPhone Xs Max Active Car Cradle Mount for fixed installation #527804

Apple iPhone 6S Plus All Countries / Apple iPhone 7 Plus All Countries / Apple iPhone Xs Max All Countries

Our Price: £67.18 (£57.21 ex Vat.)

Item Number: 527804

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel. Apple approved charging cable. Padded.

Use an active Car Cradle Mount for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active Car Cradle Mount is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.
 
When you place the iPhone in the Car Cradle Mount, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.
 
The Car Cradle Mount is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The Car Cradle Mount has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle.
 
The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22° in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone Xs Max Mobile Phone. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: Connect to a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Installation of the Car Cradle Mount: 1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. 3. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted. 4. The Car Cradle Mount is in place.







Apple iPhone 6S Plus for All Countries
Apple iPhone 7 Plus for All Countries
Apple iPhone Xs Max for All Countries






Brodit Apple iPhone Xs Max Active Car Cradle Mount for fixed installation #527667

Apple iPhone 6 Plus All Countries / Apple iPhone 6S Plus All Countries / Apple iPhone 7 Plus All Countries / Apple iPhone Xs All Countries / Apple iPhone Xs Max All Countries

Our Price: £66.37 (£56.52 ex Vat.)

Item Number: 527667

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 4

With tilt swivel. Apple approved charging cable. Adjustable Car Cradle Mount. Fits devices with skin that has the following dimensions: Width: 75-89 mm, Thickness: 2-10 mm.

NOTE! It is important to slide the device STRAIGHT DOWNWARD into the Car Cradle Mount, and to slide it STRAIGHT UPWARD out of the Car Cradle Mount.
 
Use an active Car Cradle Mount for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active Car Cradle Mount is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.
 
When you place the iPhone in the Car Cradle Mount, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2A fuse. Professional installation recommended.
 
The Car Cradle Mount is made of black ABS plastic and has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle.
 
Fits devices with skin that has the following dimensions: Width: 75-89 mm, Thickness: 2-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).
 
The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22° in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone Xs Max Mobile Phone. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Connect to a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Attaching the Car Cradle Mount: 1. To adjust the Car Cradle Mount for your device: Loosen the screws on the front side of the Car Cradle Mount, so the sides of the Car Cradle Mount can be adjusted. Place the device in the Car Cradle Mount and press the sides together so the device is firmly in place. Tighten the screws on the front side of the Car Cradle Mount. 2. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted. NOTE! It is important to slide the device STRAIGHT DOWNWARD into the Car Cradle Mount, and to slide it STRAIGHT UPWARD out of the Car Cradle Mount. 4. The Car Cradle Mount is in place.







Apple iPhone 6 Plus for All Countries
Apple iPhone 6S Plus for All Countries
Apple iPhone 7 Plus for All Countries
Apple iPhone Xs for All Countries
Apple iPhone Xs Max for All Countries






Brodit Apple iPhone Xs Max Active Car Cradle Mount for fixed installation #527663

Apple iPhone 6 Plus All Countries / Apple iPhone 6S Plus All Countries / Apple iPhone Xs Max All Countries

Our Price: £72.85 (£62.04 ex Vat.)

Item Number: 527663

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel. Fits devices with skin. Apple approved charging cable.

Use an active Car Cradle Mount for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your device within easy sight and reach. Safe, comfortable and convenient! The active Car Cradle Mount is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your device is held securely in place in an upright position for maximum cellular reception.
 
When you place the device in the Car Cradle Mount, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.
 
The Car Cradle Mount is made of black Acetal plastic and has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle.
 
This Car Cradle Mount fits devices with "standard" sized skins, not rugged or extra thick skins or skins with details sticking out.
 
The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22° in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone Xs Max Mobile Phone. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Note: Connect to a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Note: If you are connecting a GPS/Data device to the Car Cradle Mount please ensure the charger unit is located in a position within easy reach of any GPS or charging adapters. Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Attaching the Car Cradle Mount: 1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted. 3. To place the device in the Car Cradle Mount: Place the upper part of the device in the Car Cradle Mount, then press the device forwards and upwards so it snaps into place in the Car Cradle Mount. To remove the device from the Car Cradle Mount: Press upwards on the lower part of the device, in the same time pull the the device out and down from the Car Cradle Mount. 4. The Car Cradle Mount is in place.







Apple iPhone 6 Plus for All Countries
Apple iPhone 6S Plus for All Countries
Apple iPhone Xs Max for All Countries






Brodit Apple iPhone Xs Max Active Car Cradle Mount with cig-plug #521804

Apple iPhone 6S Plus All Countries / Apple iPhone 7 Plus All Countries / Apple iPhone Xs Max All Countries

Our Price: £56.66 (£48.25 ex Vat.)

Item Number: 521804

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

With tilt swivel. With USB cable. Apple approved charging cable. Padded.

Use an active Car Cradle Mount for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.
 
The Car Cradle Mount is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the Car Cradle Mount, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the Car Cradle Mount's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
Length of charging cable: 123 cm.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The Car Cradle Mount is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The Car Cradle Mount has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle.
 
The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22° in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone Xs Max Mobile Phone. This is how you fit your Active Car Cradle Mount with cig-plug mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and  look at the pictures before attaching the Car Cradle Mount.  



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel.




Enlarge image

3. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPhone 6S Plus for All Countries
Apple iPhone 7 Plus for All Countries
Apple iPhone Xs Max for All Countries






Brodit Apple iPhone Xs Max Active Car Cradle Mount with cig-plug #521667

Apple iPhone 6 Plus All Countries / Apple iPhone 6S Plus All Countries / Apple iPhone 7 Plus All Countries / Apple iPhone Xs All Countries / Apple iPhone Xs Max All Countries

Our Price: £66.00 (£56.20 ex Vat.)

Item Number: 521667

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 4

With tilt swivel. With USB cable. Apple approved charging cable. Adjustable Car Cradle Mount. Fits devices with skin that has the following dimensions: Width: 75-89 mm, Thickness: 2-10 mm.

NOTE! It is important to slide the device STRAIGHT DOWNWARD into the Car Cradle Mount, and to slide it STRAIGHT UPWARD out of the Car Cradle Mount.
 
Use an active Car Cradle Mount for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.
 
The Car Cradle Mount is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the Car Cradle Mount, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the Car Cradle Mount's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
Length of charging cable: 123 cm.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The Car Cradle Mount is made of ABS plastic and has a perfect fit. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle.
 
Fits devices with skin that has the following dimensions: Width: 75-89 mm, Thickness: 2-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).
 
The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22° in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone Xs Max Mobile Phone. This is how you fit your Active Car Cradle Mount with cig-plug mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and  look at the pictures before attaching the Car Cradle Mount.  



Enlarge image

1. To adjust the Car Cradle Mount for your device: Loosen the screws on the front side of the Car Cradle Mount, so the sides of the Car Cradle Mount can be adjusted. Place the device in the Car Cradle Mount and press the sides together so the device is firmly in place. Tighten the screws on the front side of the Car Cradle Mount.



Enlarge image

2. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Apple iPhone 6 Plus for All Countries
Apple iPhone 6S Plus for All Countries
Apple iPhone 7 Plus for All Countries
Apple iPhone Xs for All Countries
Apple iPhone Xs Max for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.