Brodit Brodit Accessories Passive Car Cradle Mount with tilt swivel #511307

Brodit Accessories All Countries Only

Our Price: 28.51 (24.28 ex Vat.)

Item Number: 511307

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Adjustable Car Cradle Mount. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm.

Keep your phone in a passive Car Cradle Mount on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient!

The adjustable Car Cradle Mount fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. Adjustable Car Cradle Mount come in various sizes. Measure your device and compare with the Car Cradle Mount specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the Car Cradle Mount you set the Car Cradle Mount's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The Car Cradle Mount has a neat and discreet design which blends well with the vehicle's interior. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the Car Cradle Mount.

The Car Cradle Mount is made of black ABS plastic. It is easy to put the device into the Car Cradle Mount, and just as easy to take it with you when leaving the vehicle. The Car Cradle Mount is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the Car Cradle Mount 22 in each direction. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Brodit Accessories Solution. This is how you fit your Passive Car Cradle Mount with tilt swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. To adjust the Car Cradle Mount for your device: Loosen the screws on the front side of the Car Cradle Mount, so the sides of the Car Cradle Mount can be adjusted. Place the device in the Car Cradle Mount and press the sides together so the device is firmly in place. Tighten the screws on the front side of the Car Cradle Mount.



Enlarge image

2.To install the Car Cradle Mount: Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.




Enlarge image

3. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Brodit Accessories for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.