Order a Brodit Device Holder or Proclip - Use the menu above and decide to find your Holder or Proclip first. This will be Step 1 complete.

 
Then find the Brodit Device Holder or Proclip - from the Step 2 Dropdown on your page. this is the Brodit Two Step Solution complete.

 

 
 

  
 
 


Brodit Brodit Accessories Passive Car Cradle Mount with tilt swivel #511625

Brodit Accessories All Countries Only

Our Price: £76.99 (£65.56 ex Vat.)

Item Number: 511625

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Adjustable Car Cradle Mount. Fits devices with skin. Width: 185-245 mm. Height: 108-173 mm.

With your surfpad in a Car Cradle Mount attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the Car Cradle Mount. The Car Cradle Mount is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

 
Instruction video (new window)
 
Features
The adjustable Car Cradle Mount fits for devices with the following dimensions: Width: 185-245 mm, Height: 108-173 mm. Measure your device and compare with the Car Cradle Mount specifications in order to make sure you have chosen the correct product. Before using the Car Cradle Mount you set the size to fit with your device. The Car Cradle Mount is designed with the intention to leave as much space open as possible for connection of charging cables and/or headphones.
 
Important 
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The Proclip Car Bracket Mount is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Brodit Accessories Solution. This is how you fit your Passive Car Cradle Mount with tilt swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.  



Enlarge image

1. To adjust the Car Cradle Mount for your device: Loosen the locking wheels on the back of the Car Cradle Mount, so the sides of the Car Cradle Mount can be adjsuted. Open up the sides to full size. Place your device in the Car Cradle Mount and press the sides together so the device is firmly in place. The resilient right arm should be little stretched. Tighten the locking wheels in order to fixate your setting.



Enlarge image

2. To install the Car Cradle Mount: Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.




Enlarge image

3. To place your device in the Car Cradle Mount: Insert the top right corner of the device into the Car Cradle Mount and press upward/rightward so the resilient arm flexes and you can place the device into the Car Cradle Mount. To remove the device: Press the device upward/rightward until it comes loose and can be removed from the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place.



 





Brodit Accessories for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.