Brodit Brodit Accessories MoveClip #215503

Brodit Accessories All Countries Only

Our Price: 9.99 (8.51 ex Vat.)

Item Number: 215503

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 3

MultiMoveClip: Complete set. Contains 1 MultiMoveClip, 2 adapter plates, 4 screws.

MultiMoveClip is for you who easily want to switch between different device Car Cradle Mount on the same Proclip Car Bracket Mount. Perfect if you have different cell phones but drive the same car, or if you want to place your GPS where the cell phone usually sits. You attach the MultiMoveClip onto your Proclip Car Bracket Mount in your car and it is then ready to use with your device Car Cradle Mount of choice. Your device Car Cradle Mount are fitted just as secure as if they were screwed directly onto the Proclip Car Bracket Mount.

MultiMoveClip fits with all Brodit's Car Cradle Mount with tilt swivel. There are two sizes of tilt swivels and to be able to fit even the smaller size two adapter plates are enclosed with the delivery. Combined with item no 215504 MultiMoveClip also fits Car Cradle Mount without tilt swivel.

MultiMoveClip film!

If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.

These are detailed fitting Instructions for the Brodit Mount for your Brodit Accessories Solution. This is how you fit your MoveClip mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. There are two tilt swivel sizes. The larger tilt swivel will fit directly into the MultiMoveClip. In order for the smaller tilt swivel to fit into the MultiMoveClip you need to use the enclosed adapter plate. Compare the tilt swivel on your Car Cradle Mount with the drawn picture to determine which size tilt swivel you have. To make sure, you can always place your Car Cradle Mount into the MultiMoveClip without using an adapter plate; if the fit is loose or unstable, you will need to use the adapter plate.

Enlarge image

1. If you have the smaller tilt swivel: Press the adapter plate into place onto the tilt swivel.

Enlarge image

2. Place the MultiMoveClip onto the desired position and screw it into place with the enclosed screws.

Enlarge image

3. To place the Car Cradle Mount into the MultiMoveClip: Slide the Car Cradle Mount downward into place from above.

Enlarge image

4. MultiMoveClip is in place. You can now switch Car Cradle Mount easily.

Brodit Accessories for All Countries



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.