Intermec

 
 

  
 
 


Our Price: 62.07 (52.86 ex Vat.)

Item Number: 530263

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

With tilt swivel. 2A charger. With RS232 connector.

The active Car Cradle Mount charges your battery when it is in the Car Cradle Mount. The charging device connects to the Intermec CN50 automatically when you put the Intermec CN50 in the Car Cradle Mount. The Car Cradle Mount is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. The RS232 connector enables for data transfer. Attach onto a Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Intermec CN50 PDA. This is how you fit your Active Car Cradle Mount with cig-plug. mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the attaching part on the back.



Enlarge image

2. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching part. Screw the Car Cradle Mount onto the attaching part.



Enlarge image

4. The Car Cradle Mount is in place.







Intermec CN50 for All Countries






Our Price: 76.04 (64.75 ex Vat.)

Item Number: 532146

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

With tilt swivel. Slim design with charger integrated in the Car Cradle Mount and with USB on-the-go connectivity.

Are you using your Intermec every day in your work? Then a Brodit active Car Cradle Mount will make your days much easier! By keeping the device in an active Car Cradle Mount, you will always have it within easy sight and reach while driving between jobs. Not only that; this active Car Cradle Mount supplies a fully charged
battery at all times, as well as USB on-the-go! This means that the Intermec can be run as both host and client (depending on the equipment connected to the Car Cradle Mount).

The active Car Cradle Mount has a unique slim design with the charging box integrated in the Car Cradle Mount, so the cigarette lighter cable has no hefty charging box on the cable. The Car Cradle Mount is made of black ABS plastic which is cold and heat resistant so you can use it in any environment. It is safe to use because of the short circuit protection and its high efficiency which reduces the heat produced in the unit.

Attach the Car Cradle Mount to a Proclip Car Bracket Mount Mounting Platform in order to get a firm installation in any car or truck. The Car Cradle Mount can be used with the following cables:
Item no 945021 Micro USB - RS-232 (driver required).
Item no 945020 Micro USB - USB-A female.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Intermec CN50 PDA. This is how you fit your Active Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: Route the cable from the Car Cradle Mount into the vehicle dashboard and route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.



Enlarge image

1. Connect a micro-USB cable to the Car Cradle Mount. Secure the cable by pulling a cable tie through the loop in the lower part of the Car Cradle Mount.



Enlarge image

2. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.




Enlarge image

3. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the tilt swivel fits. Screw the Car Cradle Mount onto the attaching plate.



Enlarge image

4. The Car Cradle Mount is in place.



Specifications: Input voltage 8-30 Volt Output voltage 4.6 Volt Charge current 2A Efficiency 86% Built-in 2,5A non replaceable fuse EC approved





Intermec CN50 for All Countries






Our Price: 76.04 (64.75 ex Vat.)

Item Number: 530146

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

With tilt swivel. Slim design with charger integrated in the Car Cradle Mount and with USB on-the-go connectivity.

Are you using your Intermec every day in your work? Then a Brodit active Car Cradle Mount will make your days much easier! By keeping the device in an active Car Cradle Mount, you will always have it within easy sight and reach while driving between jobs. Not only that; this active Car Cradle Mount supplies a fully charged
battery at all times, as well as USB on-the-go! This means that the Intermec can be run as both host and client (depending on the equipment connected to the Car Cradle Mount).

The active Car Cradle Mount has a unique slim design with the charging box integrated in the Car Cradle Mount, so the cigarette lighter cable has no hefty charging box on the cable. The Car Cradle Mount is made of black ABS plastic which is cold and heat resistant so you can use it in any environment. It is safe to use because of the short circuit protection and its high efficiency which reduces the heat produced in the unit.

Attach the Car Cradle Mount to a Proclip Car Bracket Mount Mounting Platform in order to get a firm installation in any car or truck. The Car Cradle Mount can be used with the following cables:
Item no 945021 Micro USB - RS-232 (driver required)
Item no 945020 Micro USB - USB-A female


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Intermec CN50 PDA. This is how you fit your Active Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Connect a micro-USB cable to the Car Cradle Mount. Secure the cable by pulling a cable tie through the loop in the lower part of the Car Cradle Mount.



Enlarge image

2. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.




Enlarge image

3. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the tilt swivel fits. Screw the Car Cradle Mount onto the attaching plate.



Enlarge image

4. The Car Cradle Mount is in place.



Specifications: Input voltage 8-30 Volt Output voltage 4.6 Volt Charge current 2A Efficiency 86% Built-in 2,5A non replaceable fuse EC approved





Intermec CN50 for All Countries






Brodit Intermec CN50 Adapter Cable #945021

Brodit Accessories All Countries / Intermec CN50 All Countries

Our Price: 23.74 (20.22 ex Vat.)

Item Number: 945021

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Micro-USB to DB9/RS232 (host).

Adapter from Micro-USB to DB9/RS232 (host). For use with Brodit Intermec CN50 Car Cradle Mount with item number 530146, 532146.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Intermec CN50 PDA. This is how you fit your Adapter Cable mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.







Brodit Accessories for All Countries

Intermec CN50 for All Countries






Brodit Intermec CN50 Adapter Cable #945020

Brodit Accessories All Countries / Intermec CN50 All Countries

Our Price: 12.34 (10.51 ex Vat.)

Item Number: 945020

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Micro-USB to USB Female (host).

Adapter from Micro-USB to USB Female (Host). For use with Brodit Intermec CN50 Car Cradle Mount with item number 530146, 532146.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Intermec CN50 PDA. This is how you fit your Adapter Cable mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.







Brodit Accessories for All Countries

Intermec CN50 for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.