Motorola

 
 

  
 
 


Brodit Motorola ET1 MultiStand #215780

Please view compatibility tab below

Our Price: 36.11 (30.75 ex Vat.)

Item Number: 215780

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.

This support leg is to be used then you want to convert your current Car Cradle Mount into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new Car Cradle Mount!

When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.

You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).

The support leg is 120 mm long and fits best with larger surfpads.

Tablets should not be installed onto a car's dashboard. The Proclip Car Bracket Mount is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

MultiStand film!


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola ET1 MP3 Player. This is how you fit your MultiStand mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Remove the tilt swivel from the Car Cradle Mount by loosing the screws on the front of the Car Cradle Mount.



Enlarge image

2. Place the MultiStand support leg so it fits with the holdes that used to hold the tilt swivel into place. Fasten the MultiStand support leg using the enclosed screws.




Enlarge image

3. To install the multi stand: Press the mounting adapter on the back side of the Car Cradle Mount downward, so it slides out from the groove. Place the mounting adapter into desired position and screw it into place with the enclosed screws. Place the Car Cradle Mount above the mounting adapter and press it downward so the mounting adapter fits into the groove. Press until you hear/feel it snaps into place. To remove the Car Cradle Mount: Pull the Car Cradle Mount straight upward, away from the mounting adapter.



Enlarge image

4. The Car Cradle Mount is in place in horizontal position.







Apple iPad 1 for All Countries
Apple iPad 2 for All Countries
Apple iPad Air for All Countries
Apple iPad Air 2 for All Countries
Apple iPad New (3rd Gen) for All Countries
Apple iPad New 4th Gen for All Countries
Apple iPad New with Retina (Lightning Connector) for All Countries
Apple iPad Pro for All Countries
Apple iPad Pro 12.9 for All Countries
Apple iPad Pro 9.7 for All Countries

Asus Eee Pad Transformer TF101 for All Countries

Brodit Accessories for All Countries

Dell Latitude 10 - ST2 for All Countries
Dell Latitude ST 10-1inch for All Countries
Dell Venue 11 Pro (Model 5130) for All Countries
Dell Venue 11 Pro- New (Model 7140) for All Countries
Dell Venue 8 Pro for All Countries

HP ElitePad 1000 10.1 for All Countries
HP ElitePad 900 10.1 for All Countries

Microsoft Surface for All Countries
Microsoft Surface 2 for All Countries
Microsoft Surface 3 for All Countries
Microsoft Surface PRO for All Countries
Microsoft Surface Pro 2 for All Countries
Microsoft Surface Pro 3 for All Countries

Motorola ET1 for All Countries
Motorola Xoom for All Countries

Paddytek Paddy-T V2 for All Countries

Panasonic Toughpad FZ-A1 for All Countries
Panasonic Toughpad FZ-G1 for All Countries

Samsung Galaxy Note 10.1 (2014 Edition) SM-P6000 for All Countries
Samsung Galaxy Note 10.1 (2014 Edition) SM-P6050 for All Countries
Samsung Galaxy Note 10.1 GT-N8000 for All Countries
Samsung Galaxy Note 10.1 GT-N8020 for All Countries
Samsung Galaxy Note PRO 12.2 4G SM-P905 for All Countries
Samsung Galaxy Note PRO 12.2 Wi-Fi SM-P900 for All Countries
Samsung Galaxy Tab 10.1 GT-P7500 for All Countries
Samsung Galaxy Tab 10.1 SCH-I905 for USA
Samsung Galaxy Tab 2 10.1 for All Countries
Samsung Galaxy Tab 3 10.1 GT-P5200 for All Countries
Samsung Galaxy Tab 3 10.1 GT-P5210 for All Countries
Samsung Galaxy Tab 3 10.1 GT-P5220 for All Countries
Samsung Galaxy Tab 4 10.1 SM-T530 for All Countries
Samsung Galaxy Tab 4 10.1 SM-T531 for All Countries
Samsung Galaxy Tab 4 10.1 SM-T535 for All Countries
Samsung Galaxy Tab A 9.7 for All Countries
Samsung Galaxy Tab E 9.6 for All Countries
Samsung Galaxy Tab PRO 10.1 LTE SM-T525 for All Countries
Samsung Galaxy Tab PRO 10.1 SM-T520 for All Countries
Samsung Galaxy Tab PRO 12.2 4G SM-T905 for All Countries
Samsung Galaxy Tab PRO 12.2 Wi-Fi SM-T900 for All Countries
Samsung Galaxy Tab S 10.5 SM-T800 for All Countries
Samsung Galaxy Tab S 10.5 SM-T805 for All Countries
Samsung Galaxy Tab S2 9.7 for All Countries

Sony Xperia Z3 Tablet Compact for All Countries
Sony Xperia Z4 Tablet for All Countries

Zebra ET50 10.1 for All Countries
Zebra ET55 10.1 for All Countries






Our Price: 133.07 (113.32 ex Vat.)

Item Number: 532355

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Slim design with charger integrated in the Car Cradle Mount. Fits unit both with and without handstrap.

Use an active Car Cradle Mount for your Motorola ET1 while driving and you will always have a freshly charged battery! The Car Cradle Mount provides a neat and comfortable installation -safe and convenient.

It is easy to put the unit into place in the Car Cradle Mount, and to take it with you when leaving the car. The Car Cradle Mount fits with units both with and without handstrap.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. Proclip Car Bracket Mount (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Motorola ET1 phones and GPS devices, Proclip Car Bracket Mount is not designed for large devices like tablets. In some vehicles the Proclip Car Bracket Mount has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola ET1 MP3 Player. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: Route the cable from the Car Cradle Mount into the vehicle dashboard and route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Installation of the Car Cradle Mount: 1. Place the Car Cradle Mount onto the desired position. Screw the Car Cradle Mount into place with the enclosed screws. 2. To place the device in the Car Cradle Mount: Place the lower part of the device in the Car Cradle Mount, then flip/press the upper part forwards so it snaps into place in the Car Cradle Mount. 3. To remove the device from the Car Cradle Mount: Press upwards on the upper part of the Car Cradle Mount, in the same time pull the upper part of the device out from the Car Cradle Mount and then lift the device up and out from the Car Cradle Mount. 4. The Car Cradle Mount is in place.







Motorola ET1 for All Countries






Our Price: 62.07 (52.86 ex Vat.)

Item Number: 522407

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Active Car Cradle Mount with cig-plug. Slim design with charger integrated in the Car Cradle Mount. Straight charging cable. 2 keys included. Fits unit both with and without handstrap.

This Car Cradle Mount is to be used when you want to secure your Motorola ET1 and still have it easy accessable.

The Car Cradle Mount is also perfect for use in stores, at exhibitions and any place where you want to use your Motorola ET1 without having it easy removable. The Car Cradle Mount is made of extra strong plastic and is equipped with a lock. In order to remove the Motorola ET1 from the Car Cradle Mount you need the key, two keys are included. Fits units both with and without handstrap.

Tablets should not be installed onto a car's dashboard if blocking the view or key controls. Proclip Car Bracket Mount is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola ET1 MP3 Player. This is how you fit your Car Cradle Mount with lock. mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Place the Car Cradle Mount onto the desired position. Screw the Car Cradle Mount into place with the enclosed screws.



Enlarge image

2. To place the device in the Car Cradle Mount: Place the lower part of the device in the Car Cradle Mount, then flip/press the upper part forwards so it snaps into place in the Car Cradle Mount. Push the lock downwards and turn the key to lock the unit into the Car Cradle Mount.




Enlarge image

3. To remove the device from the Car Cradle Mount: Use the enclosed key to open the lock. Slide the locks upwards. Press upwards on the upper part of the Car Cradle Mount, in the same time pull the upper part of the device out from the Car Cradle Mount and then lift the device up and out from the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place.







Motorola ET1 for All Countries






Brodit Motorola ET1 Charging Cable #942750

Motorola ET1 All Countries Only

Our Price: 66.54 (56.66 ex Vat.)

Item Number: 942750

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

For use in the vehicle's cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive Car Cradle Mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola ET1 MP3 Player. This is how you fit your Charging Cable mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read the instructions and look at the pictures before using the product.



Enlarge image

1. Connecting the charging cable: Hold the device above the cable. Lean the top of the device towards you. Place the device's connector straight above the charging cable's connector.



Enlarge image

2. Press the device towards the charging cable, at the same time press the top of the device away from you so the steering pins on each side of the connector hooks into the holes in the bottom of the device. Press downward, making sure the device is connected properly to the charging cable. You need to press firmly in an arc motion on order for the device to connect to the charging cable.




Enlarge image

3. Removing the charging cable: Take a firm grip on the back of the charging cable with your fingers.



Enlarge image

4. Press the top part of the device toward you. When the steering pins on each side of the connectos releases from the holes in the bottom of the device, lift the device up and away from the charging cable. You need to press firmly in an arc motion at the same time as you lift the device in order to remove the charging cable.







Motorola ET1 for All Countries






Our Price: 166.34 (141.65 ex Vat.)

Item Number: 532407

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 6

Active Car Cradle Mount for fixed installation. Slim design with charger integrated in the Car Cradle Mount. 2 keys included. Fits unit both with and without handstrap.

This Car Cradle Mount is to be used when you want to secure your Motorola ET1 and still have it easy accessable.

The Car Cradle Mount is also perfect for use in stores, at exhibitions and any place where you want to use your Motorola ET1 without having it easy removable. The Car Cradle Mount is made of extra strong plastic and is equipped with a lock. In order to remove the Motorola ET1 from the Car Cradle Mount you need the key, two keys are included. Fits units both with and without handstrap.

Tablets should not be installed onto a car's dashboard if blocking the view or key controls. Proclip Car Bracket Mount is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola ET1 MP3 Player. This is how you fit your Car Cradle Mount with lock. mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Place the Car Cradle Mount onto the desired position. Screw the Car Cradle Mount into place with the enclosed screws.



Enlarge image

2. To place the device in the Car Cradle Mount: Place the lower part of the device in the Car Cradle Mount, then flip/press the upper part forwards so it snaps into place in the Car Cradle Mount. Push the lock downwards and turn the key to lock the unit into the Car Cradle Mount.




Enlarge image

3. To remove the device from the Car Cradle Mount: Use the enclosed key to open the lock. Slide the locks upwards. Press upwards on the upper part of the Car Cradle Mount, in the same time pull the upper part of the device out from the Car Cradle Mount and then lift the device up and out from the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place.







Motorola ET1 for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.