Motorola

 
 

  
 
 


Brodit Motorola MC35 Passive Car Cradle Mount Tilt Swivel #848755

Motorola MC35 All Countries / Motorola MC35 USA / Symbol MC35 All Countries

Our Price: 23.74 (20.22 ex Vat.)

Item Number: 848755

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With your Motorola MC35 in a passive Car Cradle Mount attached onto the dashboard it is always within easy reach -safe and convenient. The Car Cradle Mount is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the Motorola MC35 in the Car Cradle Mount, and to take it out of the Car Cradle Mount. You can connect e.g. a charging cable to the Motorola MC35 when it is in the Car Cradle Mount. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola MC35 PDA. This is how you fit your Passive Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the tilt swivel fits. Screw the Car Cradle Mount onto the attaching plate.



Enlarge image

4. The Car Cradle Mount is in place.







Motorola MC35 for All Countries
Motorola MC35 for USA

Symbol MC35 for All Countries






Brodit Motorola MC35 Passive Car Cradle Mount Tilt Swivel #848755

Motorola MC35 All Countries / Motorola MC35 USA / Symbol MC35 All Countries

Our Price: 23.74 (20.22 ex Vat.)

Item Number: 848755

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With your Motorola MC35 in a passive Car Cradle Mount attached onto the dashboard it is always within easy reach -safe and convenient. The Car Cradle Mount is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the Motorola MC35 in the Car Cradle Mount, and to take it out of the Car Cradle Mount. You can connect e.g. a charging cable to the Motorola MC35 when it is in the Car Cradle Mount. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola MC35 PDA. This is how you fit your Passive Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the tilt swivel fits. Screw the Car Cradle Mount onto the attaching plate.



Enlarge image

4. The Car Cradle Mount is in place.







Motorola MC35 for All Countries
Motorola MC35 for USA

Symbol MC35 for All Countries






Brodit Motorola MC35 Active Car Cradle Mount Tilt Swivel #971755

Motorola MC35 All Countries / Motorola MC35 USA / Symbol MC35 All Countries

Our Price: 61.77 (52.60 ex Vat.)

Item Number: 971755

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel, with Molex adapter system. 2A charger.

The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

With the Molex adapter system you can get power for a Bluetooth GPS receiver etc. (The device does not support datatransfer.)

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The Car Cradle Mount is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola MC35 PDA. This is how you fit your Active Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Note: If you are connecting a GPS/Data device to the Car Cradle Mount please ensure the charger unit is located in a position within easy reach of any GPS or charging adapters. Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Installation of the Car Cradle Mount: 1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the Car Cradle Mount over the attaching plate so the tilt swivel fits. Screw the Car Cradle Mount onto the attaching plate. 4. The Car Cradle Mount is in place.







Motorola MC35 for All Countries
Motorola MC35 for USA

Symbol MC35 for All Countries






Brodit Motorola MC35 Active Car Cradle Mount Tilt Swivel #971755

Motorola MC35 All Countries / Motorola MC35 USA / Symbol MC35 All Countries

Our Price: 61.77 (52.60 ex Vat.)

Item Number: 971755

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

For fixed installation, with Molex adapter system. 2A charger.

The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

With the Molex adapter system you can get power for a Bluetooth GPS receiver etc. (The device does not support datatransfer.)

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The Car Cradle Mount is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola MC35 PDA. This is how you fit your Active Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Note: If you are connecting a GPS/Data device to the Car Cradle Mount please ensure the charger unit is located in a position within easy reach of any GPS or charging adapters. Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Installation of the Car Cradle Mount: 1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the Car Cradle Mount over the attaching plate so the tilt swivel fits. Screw the Car Cradle Mount onto the attaching plate. 4. The Car Cradle Mount is in place.







Motorola MC35 for All Countries
Motorola MC35 for USA

Symbol MC35 for All Countries






Brodit Motorola MC35 Active Car Cradle Mount Tilt Swivel #524026

Motorola MC35 All Countries / Motorola MC35 USA / Symbol MC35 All Countries

Our Price: 61.77 (52.60 ex Vat.)

Item Number: 524026

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 7

With tilt swivel. 2A charger.

The active Car Cradle Mount charges your battery when it is in the Car Cradle Mount. The charging device connects to the Motorola MC35 automatically when you put the Motorola MC35 in the Car Cradle Mount. The Car Cradle Mount is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. The Car Cradle Mount fits devices both with standard and extended battery. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola MC35 PDA. This is how you fit your Active Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the attaching part on the back.



Enlarge image

2. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching part. Screw the Car Cradle Mount onto the attaching part.



Enlarge image

4. The Car Cradle Mount is in place.







Motorola MC35 for All Countries
Motorola MC35 for USA

Symbol MC35 for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.