Motorola

 
 

  
 
 


Our Price: 76.04 (64.75 ex Vat.)

Item Number: 530180

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel. Slim design with charger integrated in the Car Cradle Mount and with USB on-the-go connectivity.

Are you using your Symbol every day in your work? Then a Brodit active Car Cradle Mount will make your days much easier! By keeping the device in an active Car Cradle Mount, you will always have it within easy sight and reach while driving between jobs. Not only that; this active Car Cradle Mount supplies a fully charged
battery at all times, as well as USB on-the-go! This means that the Symbol can be run as both host and client (depending on the equipment connected to the Car Cradle Mount).

The active Car Cradle Mount has a unique slim design with the charging box integrated in the Car Cradle Mount, so the cigarette lighter cable has no hefty charging box on the cable. The Car Cradle Mount is made of black ABS plastic which is cold and heat resistant so you can use it in any environment. It is safe to use because of the short circuit protection and its high efficiency which reduces the heat produced in the unit.

Attach the Car Cradle Mount to a Proclip Car Bracket Mount Mounting Platform in order to get a firm installation in any car or truck. The Car Cradle Mount can be used with the following cables:
Item no 945021 Micro USB - RS-232 (driver required)
Item no 945020 Micro USB - USB-A female


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola MC55 PDA. This is how you fit your Active Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Motorola MC55 for All Countries
Motorola MC65 for All Countries
Motorola MC67 for All Countries

Symbol MC55 for All Countries
Symbol MC65 for All Countries
Symbol MC67 for All Countries






Our Price: 76.04 (64.75 ex Vat.)

Item Number: 532180

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

With tilt swivel. Slim design with charger integrated in the Car Cradle Mount and with USB on-the-go connectivity.

Are you using your Symbol every day in your work? Then a Brodit active Car Cradle Mount will make your days much easier! By keeping the device in an active Car Cradle Mount, you will always have it within easy sight and reach while driving between jobs. Not only that; this active Car Cradle Mount supplies a fully charged
battery at all times, as well as USB on-the-go! This means that the Symbol can be run as both host and client (depending on the equipment connected to the Car Cradle Mount).

The active Car Cradle Mount has a unique slim design with the charging box integrated in the Car Cradle Mount, so the cigarette lighter cable has no hefty charging box on the cable. The Car Cradle Mount is made of black ABS plastic which is cold and heat resistant so you can use it in any environment. It is safe to use because of the short circuit protection and its high efficiency which reduces the heat produced in the unit.

Attach the Car Cradle Mount to a Proclip Car Bracket Mount Mounting Platform in order to get a firm installation in any car or truck. The Car Cradle Mount can be used with the following cables:
Item no 945021 Micro USB - RS-232 (driver required)
Item no 945020 Micro USB - USB-A female


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola MC55 PDA. This is how you fit your Active Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: Route the cable from the Car Cradle Mount into the vehicle dashboard and route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Motorola MC55 for All Countries
Motorola MC65 for All Countries
Motorola MC67 for All Countries

Symbol MC55 for All Countries
Symbol MC65 for All Countries
Symbol MC67 for All Countries






Our Price: 76.04 (64.75 ex Vat.)

Item Number: 530013

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel. Slim design with charger integrated in the Car Cradle Mount.

The active Car Cradle Mount charges your battery when it is in the Car Cradle Mount. The charging device connects to the Motorola MC55 automatically when you put the Motorola MC55 in the Car Cradle Mount. The Car Cradle Mount is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. The Car Cradle Mount fits devices both with standard and extended battery. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola MC55 PDA. This is how you fit your Active Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Motorola MC55 for All Countries
Motorola MC65 for All Countries
Motorola MC67 for All Countries

Symbol MC55 for All Countries
Symbol MC65 for All Countries
Symbol MC67 for All Countries






Our Price: 76.04 (64.75 ex Vat.)

Item Number: 532013

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel. Slim design with charger integrated in the Car Cradle Mount.

The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior. The charging device is integrated in the Car Cradle Mount itself, so there is no large charging box on the cable.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The Car Cradle Mount is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. The Car Cradle Mount fits devices both with standard and extended battery. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola MC55 PDA. This is how you fit your Active Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: Route the cable from the Car Cradle Mount into the vehicle dashboard and route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Motorola MC55 for All Countries
Motorola MC65 for All Countries
Motorola MC67 for All Countries

Symbol MC55 for All Countries
Symbol MC65 for All Countries
Symbol MC67 for All Countries






Our Price: 61.77 (52.60 ex Vat.)

Item Number: 513013

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 5

With tilt swivel, with Molex adapter system. 2A charger. Fits devices with standard and extended battery.

An active Car Cradle Mount which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

You can choose to use the Car Cradle Mount as an active Car Cradle Mount for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the Car Cradle Mount also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The Car Cradle Mount is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Motorola MC55 PDA. This is how you fit your Active Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: Route the cable from the Car Cradle Mount into the vehicle dashboard and route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Motorola MC55 for All Countries
Motorola MC65 for All Countries
Motorola MC67 for All Countries

Symbol MC55 for All Countries
Symbol MC65 for All Countries
Symbol MC67 for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.