Brodit Samsung Galaxy Xcover 4 Active Car Cradle Mount for fixed installation #513958

Samsung Galaxy Xcover 4 All Countries Only

Our Price: 89.24 (75.99 ex Vat.)

Item Number: 513958

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With Molex adapter system. 2A charger. With tilt swivel.

Keep your phone's battery fully charged in an active Car Cradle Mount, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. For fixed installation. The Car Cradle Mount is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. You have full access to the camera and all buttons when the device is in the Car Cradle Mount. It is easy to slide the phone in place in the Car Cradle Mount so it connects to the charging, and to take it out of the Car Cradle Mount when leaving the vehicle. Fits only devices without the included back cover on.

The Car Cradle Mount is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20 and swivels 360. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended. Attach onto Proclip Car Bracket Mount Mounting Platform.

Dimensions: 79 x 102 x 50 mm (W x H x D mm)
Weight: 198 g
Cable length: Total length: 241 cm (Car Cradle Mount to box: 70 cm, Connectors+box 14 cm, Box to open end: 157 cm.)

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
Approvals: E, CE, FCC, ROHS.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Samsung Galaxy Xcover 4 Mobile Phone. This is how you fit your Active Car Cradle Mount for fixed installation mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Samsung Galaxy Xcover 4 for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.