Samsung

 
 

  
 
 


Our Price: 24.71 (21.04 ex Vat.)

Item Number: 511327

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

When keeping your Galaxy S II Skyrocket in a passive Car Cradle Mount, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the Car Cradle Mount. The Car Cradle Mount is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Samsung Galaxy S2 4G i9210T Mobile Phone. This is how you fit your Passive Car Cradle Mount with tilt swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Samsung Galaxy S II HD LTE for All Countries
Samsung Galaxy S II LTE i727R for All Countries
Samsung Galaxy S II LTE i9210 for All Countries
Samsung Galaxy S II Skyrocket SGH-I727 for USA
Samsung Galaxy S II T989 for All Countries
Samsung Galaxy S2 4G i9210T for All Countries






Our Price: 43.72 (37.23 ex Vat.)

Item Number: 512327

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel.

The active Car Cradle Mount charges your Galaxy S II Skyrocket when it is in the Car Cradle Mount. The Car Cradle Mount is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Samsung Galaxy S2 4G i9210T Mobile Phone. This is how you fit your Active Car Cradle Mount with cig-plug. mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place.







Samsung Galaxy S II HD LTE for All Countries
Samsung Galaxy S II LTE i727R for All Countries
Samsung Galaxy S II LTE i9210 for All Countries
Samsung Galaxy S II Skyrocket SGH-I727 for USA
Samsung Galaxy S II T989 for All Countries
Samsung Galaxy S2 4G i9210T for All Countries






Our Price: 61.77 (52.60 ex Vat.)

Item Number: 513327

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

With tilt swivel, with Molex adapter system. 2A charger.

An active Car Cradle Mount which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

You can choose to use the Car Cradle Mount as an active Car Cradle Mount for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the Car Cradle Mount also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The Car Cradle Mount is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Samsung Galaxy S2 4G i9210T Mobile Phone. This is how you fit your Active Car Cradle Mount for fixed installation. mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Note: If you are connecting a GPS/Data device to the Car Cradle Mount please ensure the charger unit is located in a position within easy reach of any GPS or charging adapters. Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. How to mount the Car Cradle Mount: 1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the Car Cradle Mount toward you and hold it slightly tensed, in the same time tighten the screw so the Car Cradle Mount is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the Car Cradle Mount is firmly in place, but still can be adjusted. 4. The Car Cradle Mount is in place.







Samsung Galaxy S II HD LTE for All Countries
Samsung Galaxy S II LTE i727R for All Countries
Samsung Galaxy S II LTE i9210 for All Countries
Samsung Galaxy S II Skyrocket SGH-I727 for USA
Samsung Galaxy S II T989 for All Countries
Samsung Galaxy S2 4G i9210T for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.