Samsung

 
 

  
 
 


Brodit Samsung Galaxy Tab 10-1 GT-P7500 Passive Car Cradle Mount with tilt swivel #511329

Samsung Galaxy Tab 10.1 GT-P7500 All Countries / Samsung Galaxy Tab 10.1 SCH-I905 USA / Samsung Galaxy Tab 10-1 GT-P7500 All Countries / Samsung Galaxy Tab 10-1 SCH-I905 USA / Samsung Galaxy Tab 2 10.1 All Countries

Our Price: 36.11 (30.75 ex Vat.)

Item Number: 511329

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With your Galaxy Tab in a Car Cradle Mount attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the Galaxy Tab when it is in the Car Cradle Mount.

The Car Cradle Mount is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the Car Cradle Mount into desired position. It is easy to put the Galaxy Tab into place in the Car Cradle Mount, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. Proclip Car Bracket Mount (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Samsung Galaxy Tab 10-1 GT-P7500 phones and GPS devices, Proclip Car Bracket Mount is not designed for large devices like tablets. In some vehicles the Proclip Car Bracket Mount has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Samsung Galaxy Tab 10-1 GT-P7500 MP3 Player. This is how you fit your Passive Car Cradle Mount with tilt swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.




Enlarge image

3. To place the device in the Car Cradle Mount: Place the lower part of the device in the Car Cradle Mount, then flip/press the upper part forwards so it snaps into place in the Car Cradle Mount. To remove the device from the Car Cradle Mount: Press upwards on the upper part of the Car Cradle Mount, in the same time pull the upper part of the device out from the Car Cradle Mount and then lift the device up and out from the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place.







Samsung Galaxy Tab 10.1 GT-P7500 for All Countries
Samsung Galaxy Tab 10.1 SCH-I905 for USA
Samsung Galaxy Tab 10-1 GT-P7500 for All Countries
Samsung Galaxy Tab 10-1 SCH-I905 for USA
Samsung Galaxy Tab 2 10.1 for All Countries






Brodit Samsung Galaxy Tab 10-1 GT-P7500 Active Car Cradle Mount for fixed installation. #513329

Samsung Galaxy Tab 10.1 GT-P7500 All Countries / Samsung Galaxy Tab 10.1 SCH-I905 USA / Samsung Galaxy Tab 10-1 GT-P7500 All Countries / Samsung Galaxy Tab 10-1 SCH-I905 USA / Samsung Galaxy Tab 2 10.1 All Countries

Our Price: 76.04 (64.75 ex Vat.)

Item Number: 513329

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

With tilt swivel, with Molex adapter system.

Use an active Car Cradle Mount for your Galaxy Tab 10,1 while driving and you will always have a freshly charged battery! The active Car Cradle Mount is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!

12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The Car Cradle Mount is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the Car Cradle Mount into desired position. It is easy to put the Galaxy Tab 10,1 into place in the Car Cradle Mount, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. Proclip Car Bracket Mount (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Samsung Galaxy Tab 10-1 GT-P7500 phones and GPS devices, Proclip Car Bracket Mount is not designed for large devices like tablets. In some vehicles the Proclip Car Bracket Mount has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Samsung Galaxy Tab 10-1 GT-P7500 MP3 Player. This is how you fit your Active Car Cradle Mount for fixed installation. mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Installation of the Car Cradle Mount: Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. 1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted. 4. The Car Cradle Mount is in place in upright and horizontal position.







Samsung Galaxy Tab 10.1 GT-P7500 for All Countries
Samsung Galaxy Tab 10.1 SCH-I905 for USA
Samsung Galaxy Tab 10-1 GT-P7500 for All Countries
Samsung Galaxy Tab 10-1 SCH-I905 for USA
Samsung Galaxy Tab 2 10.1 for All Countries






Brodit Samsung Galaxy Tab 10-1 GT-P7500 Active Car Cradle Mount with cig-plug. #512329

Samsung Galaxy Tab 10.1 GT-P7500 All Countries / Samsung Galaxy Tab 10.1 SCH-I905 USA / Samsung Galaxy Tab 10-1 GT-P7500 All Countries / Samsung Galaxy Tab 10-1 SCH-I905 USA / Samsung Galaxy Tab 2 10.1 All Countries

Our Price: 54.17 (46.13 ex Vat.)

Item Number: 512329

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel.

Use an active Car Cradle Mount for your Galaxy Tab 10,1 while driving and you will always have a freshly charged battery! The Car Cradle Mount provides a neat and comfortable installation -safe and convenient. The Car Cradle Mount is equipped with a cig-plug for connection to the vehicle's 12 Volt socket.

The Car Cradle Mount is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the Car Cradle Mount into desired position. It is easy to put the Galaxy Tab 10,1 into place in the Car Cradle Mount, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. Proclip Car Bracket Mount (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Samsung Galaxy Tab 10-1 GT-P7500 phones and GPS devices, Proclip Car Bracket Mount is not designed for large devices like tablets. In some vehicles the Proclip Car Bracket Mount has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Samsung Galaxy Tab 10-1 GT-P7500 MP3 Player. This is how you fit your Active Car Cradle Mount with cig-plug. mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

4. The Car Cradle Mount is in place in upright and horizontal position.







Samsung Galaxy Tab 10.1 GT-P7500 for All Countries
Samsung Galaxy Tab 10.1 SCH-I905 for USA
Samsung Galaxy Tab 10-1 GT-P7500 for All Countries
Samsung Galaxy Tab 10-1 SCH-I905 for USA
Samsung Galaxy Tab 2 10.1 for All Countries






Brodit Samsung Galaxy Tab 10-1 GT-P7500 Car Cradle Mount for Locking #541329

Samsung Galaxy Tab 10.1 GT-P7500 All Countries / Samsung Galaxy Tab 10.1 SCH-I905 USA / Samsung Galaxy Tab 10-1 GT-P7500 All Countries / Samsung Galaxy Tab 10-1 SCH-I905 USA / Samsung Galaxy Tab 2 10.1 All Countries

Our Price: 50.37 (42.89 ex Vat.)

Item Number: 541329

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Passive Car Cradle Mount with tilt swivel. With spring stud locking.

This Car Cradle Mount is to be used when you want to have your Galaxy Tab extra securely in place and still have it easy accessable. The Car Cradle Mount is crashtested and approved for use on Brodit's headrest mount.

The Car Cradle Mount is made of extra strong plastic and is equipped with a spring stud locking device. The Car Cradle Mount is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the Car Cradle Mount into desired position.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. Proclip Car Bracket Mount (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Samsung Galaxy Tab 10-1 GT-P7500 phones and GPS devices, Proclip Car Bracket Mount is not designed for large devices like tablets. In some vehicles the Proclip Car Bracket Mount has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Proclip Car Bracket Mount is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Samsung Galaxy Tab 10-1 GT-P7500 MP3 Player. This is how you fit your Car Cradle Mount for Locking mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the Car Cradle Mount onto the attaching plate. Tighten the screw so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

2. Slide the device from above carefully into the Car Cradle Mount until you feel that it is properly attached. Press the spring stud locking device onto the upper part of the Car Cradle Mount.




Enlarge image

3. Remove the spring stud locking device by slidning it upwards away from the Car Cradle Mount. Slide the device upwards carefully out of the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place. Switch between portrait and landscape mode by turning the Car Cradle Mount into desired position.







Samsung Galaxy Tab 10.1 GT-P7500 for All Countries
Samsung Galaxy Tab 10.1 SCH-I905 for USA
Samsung Galaxy Tab 10-1 GT-P7500 for All Countries
Samsung Galaxy Tab 10-1 SCH-I905 for USA
Samsung Galaxy Tab 2 10.1 for All Countries






Brodit Samsung Galaxy Tab 10-1 GT-P7500 Car Cradle Mount with lock. #539329

Samsung Galaxy Tab 10.1 GT-P7500 All Countries / Samsung Galaxy Tab 10.1 SCH-I905 USA / Samsung Galaxy Tab 10-1 GT-P7500 All Countries / Samsung Galaxy Tab 10-1 SCH-I905 USA / Samsung Galaxy Tab 2 10.1 All Countries

Our Price: 55.12 (46.94 ex Vat.)

Item Number: 539329

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Passive Car Cradle Mount with tilt swivel. 2 keys included.

This Car Cradle Mount is to be used when you want to secure your Galaxy Tab and still have it easy accessable. The Car Cradle Mount is crashtested and approved for use on Brodit's headrest mount.

The Car Cradle Mount is also perfect for use in stores, at exhibitions and any place where you want to use your Galaxy Tab without having it easy removable. The Car Cradle Mount is made of extra strong plastic and is equipped with a lock. In order to remove the Galaxy Tab from the Car Cradle Mount you need the key, two keys are included. The Car Cradle Mount is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the Car Cradle Mount into desired position.

Tablets should not be installed onto a car's dashboard if blocking the view or key controls. Proclip Car Bracket Mount is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed onto a Brodit headrest mount.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Samsung Galaxy Tab 10-1 GT-P7500 MP3 Player. This is how you fit your Car Cradle Mount with lock. mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the Car Cradle Mount over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the Car Cradle Mount onto the attaching plate. Tighten the screw so the Car Cradle Mount is firmly in place, but still can be adjusted.



Enlarge image

2. Slide the device carefully into the Car Cradle Mount from above. Press the lock onto the top part of the Car Cradle Mount. Press the button to lock.




Enlarge image

3. Use the enclosed key to open the lock. Remove the lock by slidning it uppwards away from the Car Cradle Mount. Slide the device upwards carefully out of the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place. Switch between portrait and landscape mode by turning the Car Cradle Mount into desired position.







Samsung Galaxy Tab 10.1 GT-P7500 for All Countries
Samsung Galaxy Tab 10.1 SCH-I905 for USA
Samsung Galaxy Tab 10-1 GT-P7500 for All Countries
Samsung Galaxy Tab 10-1 SCH-I905 for USA
Samsung Galaxy Tab 2 10.1 for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.