TomTom

 
 

  
 
 


Brodit TomTom GO 300 Mounting Accessories #215039

Please view compatibility tab below

Our Price: 22.80 (19.42 ex Vat.)

Item Number: 215039

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Attaching mount, adjustable sideways and in height, and tilts.

TomTom Go has been available for some time now, and it is a big success! Keep your unit in a Car Cradle Mount attached to the dashboard, and you will always have it within easy reach! You can easily take the unit with you when leaving the vehicle. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your TomTom GO 300 GPS. This is how you fit your Mounting Accessories mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the mount. Attach the mount onto desired position. Installation onto Proclip Car Bracket Mount Mounting Platform in your vehicle is recommended. In the installation, three screws and the round mount that come with the unit, are used.



Enlarge image

1. Place the small part of the mount inside the edges on the big part of the mount, so the holes match. Screw the small part into place in desired angle/position by using two of the screws.



Enlarge image

2. Place the round mount onto the attaching mount so the holes fit.




Enlarge image

3. Screw the round mount into place by using the third screw.



Enlarge image

4. The mount with unit in place. You can attach a charging cable to the mount when the uinit is attached onto the mount. The unit can be adjusted sideways and in height, and tilted.







Becker Traffic Assist PRO 7916 for All Countries
Becker Traffic Assist Pro 7929 for All Countries

TomTom GO for All Countries
TomTom GO 300 for All Countries
TomTom GO 500 for All Countries
TomTom GO 700 for All Countries

VDO PN 1000 for All Countries

VDO Dayton PN 1000 for All Countries






Brodit TomTom GO 300 Mounting Accessories #215038

TomTom GO All Countries / TomTom GO 300 All Countries / TomTom GO 500 All Countries / TomTom GO 700 All Countries

Our Price: 22.80 (19.42 ex Vat.)

Item Number: 215038

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Attaching mount, adjustable sideways.

TomTom Go has been available for some time now, and it is a big success! Keep your unit in a Car Cradle Mount attached to the dashboard, and you will always have it within easy reach! You can easily take the unit with you when leaving the vehicle. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your TomTom GO 300 GPS. This is how you fit your Mounting Accessories mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the mount. Attach the mount onto desired position. Installation onto Proclip Car Bracket Mount Mounting Platform in your vehicle is recommended. In the installation, the round mount that comes with the unit, is used.



Enlarge image

1. Place the lower front edge of the unit onto the edge of the mount.



Enlarge image

2. Flip/Press the unit downwards, so it snaps into place onto the mount.




Enlarge image

3. To remove the unit from the mount: press the button on the front of the unit, in the same time pull the back side of the unit upwards/towards you and out from the mount.



Enlarge image

4. The mount with unit in place. You can attach a charging cable to the unit when it is attached onto the mount.







TomTom GO for All Countries
TomTom GO 300 for All Countries
TomTom GO 500 for All Countries
TomTom GO 700 for All Countries






Brodit TomTom GO 300 Mount with tilt swivel #215027

Please view compatibility tab below

Our Price: 24.71 (21.04 ex Vat.)

Item Number: 215027

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

More and more people use navigation units. Keep your unit in a Car Cradle Mount attached to the dashboard, and you will always have it within easy reach! You can easily take the unit with you when leaving the vehicle. The Car Cradle Mount can be adjusted in order to avoid light reflection on the screen. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your TomTom GO 300 GPS. This is how you fit your Mount with tilt swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the mount.



Enlarge image

1. Attachment of mount: Loosen the screw in the center of the mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws.



Enlarge image

2. Place the mount over the attaching plate wo the tilt swivel fits. Screw the mount onto the attaching plate. The mount is in place.




Enlarge image

3. Attachment of unit onto mount: Remove the screw from the original mount. Place the unit by the mount, and press it towards the mount so it goes into the mount and the holes match. Put the screw into place from underneath and tighten.



Enlarge image

4. The mount is in place, with a unit in place.







Becker Traffic Assist PRO 7916 for All Countries
Becker Traffic Assist Pro 7929 for All Countries

TomTom GO for All Countries
TomTom GO 300 for All Countries
TomTom GO 500 for All Countries
TomTom GO 700 for All Countries

VDO PN 1000 for All Countries

VDO Dayton PN 1000 for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.