TomTom

 
 

  
 
 


Our Price: 76.04 (64.75 ex Vat.)

Item Number: 215684

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With straight cable for fixed installation.

Car Cradle Mount with Active Dock. Keep your TomTom in the Car Cradle Mount and it will be firmly in place within easy reach! You can attach a charging cable to the Car Cradle Mount. When you have attached the cable to the Car Cradle Mount you do not have to connect it manually to the device each time you put the GPS in the Car Cradle Mount. Active Car Cradle Mount for fixed installation. Gives a neat installation without loose cables hanging over the interior. The enclosed cable can not be used for TMC.

The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.

You can easily take the device with you when leaving the vehicle. The Car Cradle Mount is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Attach onto Proclip Car Bracket Mount Mounting Platform.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
RoHS compliant: ROHS


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your TomTom GO 610 GPS. This is how you fit your Active Dock Car Cradle Mount with Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Installation of the Car Cradle Mount: 1-2. Installation of the mount: Place the mount on desired position and screw it into place with the enclosed screws. Turn the mount in different angles in order to get to the holes. 3. Cables can be connected to the back side of the mount. 4. The mount is in place.







TomTom GO 500 New version for All Countries
TomTom GO 5000 for All Countries
TomTom GO 510 for All Countries
TomTom GO 600 for All Countries
TomTom GO 6000 for All Countries
TomTom GO 610 for All Countries
TomTom GO 6100 for All Countries






Our Price: 50.37 (42.89 ex Vat.)

Item Number: 215683

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 3

With Cigarette Lighter Cable.

Car Cradle Mount with Active Dock. Keep your TomTom in the Car Cradle Mount and it will be firmly in place within easy reach! You can attach for example a charging cable or a TMC cable to the Car Cradle Mount. When you have attached the cable to the Car Cradle Mount you do not have to connect it manually to the device each time you put the GPS in the Car Cradle Mount. The enclosed cable can not be used for TMC.

The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.

You can easily take the device with you when leaving the vehicle. The Car Cradle Mount is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your TomTom GO 610 GPS. This is how you fit your Active Dock Car Cradle Mount with Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the mount.



Enlarge image

1-2. Installation of the mount: Place the mount on desired position and screw it into place with the enclosed screws. Turn the mount in different angles in order to get to the holes.








TomTom GO 500 New version for All Countries
TomTom GO 5000 for All Countries
TomTom GO 510 for All Countries
TomTom GO 600 for All Countries
TomTom GO 6000 for All Countries
TomTom GO 610 for All Countries
TomTom GO 6100 for All Countries






Our Price: 39.91 (33.99 ex Vat.)

Item Number: 215682

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - approx 7-10 days

Car Cradle Mount with Active Dock. Keep your TomTom in the Car Cradle Mount and it will be firmly in place within easy reach!

If you want charging to your TomTom when it is held in place in the Active Dock, you can connect an angled micro USB charging cable, item no. 944010. (944010 can not be used for TMC).

The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.

You can easily take the device with you when leaving the vehicle. The Car Cradle Mount is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto Proclip Car Bracket Mount Mounting Platform. (Cable not included.)


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your TomTom GO 610 GPS. This is how you fit your Active Dock Car Cradle Mount with Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the mount.



Enlarge image

1-3. Installation of the mount: Place the mount on desired position and screw it into place with the enclosed screws. Turn the mount in different angles in order to get to the holes.








TomTom GO 500 New version for All Countries
TomTom GO 5000 for All Countries
TomTom GO 510 for All Countries
TomTom GO 600 for All Countries
TomTom GO 6000 for All Countries
TomTom GO 610 for All Countries
TomTom GO 6100 for All Countries






Brodit TomTom GO 610 Mounting Accessories #215588

Please view compatibility tab below

Our Price: 17.10 (14.56 ex Vat.)

Item Number: 215588

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Tilt swivel mount.

Keep your GPS device in a Car Cradle Mount attached to the dashboard, and you will always have it within easy reach! You can easily take the device with you when leaving the vehicle. The Car Cradle Mount can be adjusted in order to avoid light reflection on the screen.

With this tilt swivel mount you can have your GPS installed on the dashboard. You use the original mount that comes with the GPS and press it onto the tilt swivel mount, which you can attach onto the Proclip Car Bracket Mount Mounting Platform. This will give you a firm, neat installation.

Please Note that the original TomTom Dock is not included.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your TomTom GO 610 GPS. This is how you fit your Mounting Accessories mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the mount. Please Note that the original TomTom Dock is not included.



Enlarge image

1. Place the tilt swivel mount in the desired position. Screw the mount into place with the enclosed screws.



Enlarge image

2. The tilt swivel mount is in place. This mount fits a number a devices, the installation procedure may vary but the principal is similar for all devices.




Enlarge image

3. For the installation, you will use the original mount that comes with the GPS and press it onto the tilt swivel mount. Place the original mount by the tilt swivel mount so the tilt swivel fits. Press the original mount onto the tilt swivel mount, press until you feel it is properly in place.



Enlarge image

4. The mount is in place.







TomTom GO 500 New version for All Countries
TomTom GO 5000 for All Countries
TomTom GO 510 for All Countries
TomTom GO 5100 for All Countries
TomTom GO 600 for All Countries
TomTom GO 6000 for All Countries
TomTom GO 610 for All Countries
TomTom GO 6100 for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.