TomTom

 
 

  
 
 


Our Price: £61.77 (£52.60 ex Vat.)

Item Number: 279024

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Active Car Cradle Mount for fixed installation. With tilt swivel. 12/24 Volt. With TMC connectivity (MiniUSB plug).

Active Car Cradle Mount with pass-through connector and for fixed installation. All cables that can be used with the GPS device can also be used with the Car Cradle Mount, for example a TMC cable. This means that you can have both charging and TMC connected to the GPS in the same time! When you have attached the cable to the Car Cradle Mount it is firmly in place and you do not have connect it manually to the device each time you put the GPS in the Car Cradle Mount. Fits TMC with miniUSB connector (TMC not included).
 
The Car Cradle Mount has a straight cable with open end for fixed installation. The cable is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
 
You can easily take the device with you when leaving the vehicle. 12/24 Volt. The product is E-approved.  Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The Car Cradle Mount is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a Proclip Car Bracket Mount Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your TomTom GO 730 GPS. This is how you fit your Car Cradle Mount with Pass-Through Connector mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount. Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse Car Cradle Mount and fuse inline with the Red wire close to the power source. Route the cable from the Car Cradle Mount into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. Installation of the Car Cradle Mount: 1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the Car Cradle Mount over the attaching plate so the tilt swivel fits. Screw the Car Cradle Mount onto the attaching plate. All cables that fit the device can be attached to the Car Cradle Mount. 4. The Car Cradle Mount is in place.







TomTom GO 520 for All Countries
TomTom GO 520 T for All Countries
TomTom GO 530 for All Countries
TomTom GO 530 T for All Countries
TomTom GO 630 for All Countries
TomTom GO 630 T for All Countries
TomTom GO 720 for All Countries
TomTom GO 720 T for All Countries
TomTom GO 730 for All Countries
TomTom GO 730 T for All Countries
TomTom GO 920 for All Countries
TomTom GO 920 T for All Countries
TomTom GO 930 for All Countries
TomTom GO 930 T for All Countries
TomTom WORK GO 7000 for All Countries






Our Price: £47.52 (£40.47 ex Vat.)

Item Number: 278024

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Active Car Cradle Mount with cigg-plug, with tilt swivel. 12/24 Volt. With TMC connectivity (MiniUSB plug).

Active Car Cradle Mount with pass-through connector and cigarette lighter plug. All cables that can be used with the GPS device can also be used with the Car Cradle Mount, for example a TMC cable. This means that you can have both charging and TMC connected to the GPS in the same time! Fits TMC with miniUSB connector (TMC not included).

When you have attached the cable to the Car Cradle Mount it is firmly in place and you do not have connect it manually to the device each time you put the GPS in the Car Cradle Mount. The Car Cradle Mount has a cigarette lighter plug for connection to the vehicle's 12 Volt socket. 12/24 Volt.

You can easily take the device with you when leaving the vehicle. The Car Cradle Mount is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your TomTom GO 730 GPS. This is how you fit your Car Cradle Mount with Pass-Through Connector mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the tilt swivel fits. Screw the Car Cradle Mount onto the attaching plate. All cables that fit the device, can also be attached to the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place.







TomTom GO 520 for All Countries
TomTom GO 520 T for All Countries
TomTom GO 530 for All Countries
TomTom GO 530 T for All Countries
TomTom GO 630 for All Countries
TomTom GO 630 T for All Countries
TomTom GO 720 for All Countries
TomTom GO 720 T for All Countries
TomTom GO 730 for All Countries
TomTom GO 730 T for All Countries
TomTom GO 920 for All Countries
TomTom GO 920 T for All Countries
TomTom GO 930 for All Countries
TomTom GO 930 T for All Countries
TomTom WORK GO 7000 for All Countries






Our Price: £47.52 (£40.47 ex Vat.)

Item Number: 277024

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Passive Car Cradle Mount with tilt swivel. With TMC connectivity (MiniUSB plug).

Passive Car Cradle Mount with pass-through connector. All cables that can be used with the GPS device can also be used with the Car Cradle Mount, for example a charging cable or a TMC cable. When you have attached the cable to the Car Cradle Mount it is firmly in place and you do not have connect it manually to the device each time you put the GPS in the Car Cradle Mount. Fits TMC with miniUSB connector (TMC not included).

You can easily take the device with you when leaving the vehicle. The Car Cradle Mount is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your TomTom GO 730 GPS. This is how you fit your Car Cradle Mount with Pass-Through Connector mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the tilt swivel fits. Screw the Car Cradle Mount onto the attaching plate. All cables that fit the device, can also be attached to the Car Cradle Mount.



Enlarge image

4. The Car Cradle Mount is in place.







TomTom GO 520 for All Countries
TomTom GO 520 T for All Countries
TomTom GO 530 for All Countries
TomTom GO 530 T for All Countries
TomTom GO 630 for All Countries
TomTom GO 630 T for All Countries
TomTom GO 720 for All Countries
TomTom GO 720 T for All Countries
TomTom GO 730 for All Countries
TomTom GO 730 T for All Countries
TomTom GO 920 for All Countries
TomTom GO 920 T for All Countries
TomTom GO 930 for All Countries
TomTom GO 930 T for All Countries
TomTom WORK GO 7000 for All Countries






Our Price: £43.72 (£37.23 ex Vat.)

Item Number: 215268

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel.

The choice for you who want to have your device within easy reach, attached onto a Proclip Car Bracket Mount instead of on the windshield suction mount. Active Car Cradle Mount with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12 Volt.

You can easily take the device with you when leaving the vehicle. The Car Cradle Mount is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your TomTom GO 730 GPS. This is how you fit your Active Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the tilt swivel fits. Screw the Car Cradle Mount onto the attaching plate.



Enlarge image

4. The Car Cradle Mount is in place.







TomTom GO 520 for All Countries
TomTom GO 530 for All Countries
TomTom GO 630 for All Countries
TomTom GO 720 for All Countries
TomTom GO 730 for All Countries
TomTom GO 920 for All Countries
TomTom GO 930 for All Countries
TomTom WORK GO 7000 for All Countries






Our Price: £61.77 (£52.60 ex Vat.)

Item Number: 215269

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

With tilt swivel. 12/24 Volt, 2 A charger.

The choice for you who want to have your device within easy reach, attached onto a Proclip Car Bracket Mount instead of on the windshield suction mount. Active Car Cradle Mount for fixed installation. Gives a neat installation without loose cables. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt.

You can easily take the device with you when leaving the vehicle. The Car Cradle Mount is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto Proclip Car Bracket Mount Mounting Platform.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your TomTom GO 730 GPS. This is how you fit your Active Car Cradle Mount Tilt Swivel mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Car Cradle Mount.



Enlarge image

1. Loosen the screw in the center of the Car Cradle Mount so you can remove the tilt swivel attaching plate on the back.



Enlarge image

2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws.




Enlarge image

3. Place the Car Cradle Mount over the attaching plate so the tilt swivel fits. Screw the Car Cradle Mount onto the attaching plate.



Enlarge image

4. The Car Cradle Mount is in place.







TomTom GO 520 for All Countries
TomTom GO 530 for All Countries
TomTom GO 630 for All Countries
TomTom GO 720 for All Countries
TomTom GO 730 for All Countries
TomTom GO 920 for All Countries
TomTom GO 930 for All Countries
TomTom WORK GO 7000 for All Countries






 

 



Thank you for adding your Brodit Car Cradle Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Bracket Mount then please select from the menus below. If you already have a Brodit Car Bracket Mount please proceed to checkout.