Fiat

 
 

 
 
 


Brodit ProClip for Fiat Ducato Angled Car Bracket Mount #653877

Citroen Jumper Australia / Citroen Relay UK / Fiat Ducato All Countries / Peugeot Boxer UK

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653877

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

The Proclip Car Bracket Mount is a mounting bracket for the Fiat Ducato's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Fiat Ducato. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Fiat Ducato Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the dashboard, to widen the gap. Press the angled edge on the left part of the Proclip Car Bracket Mount into the gap above the gap opener. Pull out the gap opener.



Enlarge image

2. Press the gap opener into the gap between the frame surrounding the air vent and the frame surrounding the control panel. Hook the angled edge on the right part of the Proclip Car Bracket Mount into the gap above the gap opener. Pull out the gap opener.




Enlarge image

3. Press forward on the right side of the Proclip Car Bracket Mount so the angled edge goes all the way into the gap and the adhesive tape attaches.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Citroen Jumper for Australia
Citroen Relay for UK

Fiat Ducato for All Countries

Peugeot Boxer for UK






Brodit ProClip for Fiat Ducato Center Car Bracket Mount #653876

Citroen Jumper Australia / Citroen Relay UK / Fiat Ducato All Countries / Peugeot Boxer UK

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653876

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 3

The Proclip Car Bracket Mount is a mounting bracket for the Fiat Ducato's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Fiat Ducato. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Fiat Ducato Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the angled edge on the right part of the Proclip Car Bracket Mount into the gap between the frame surrounding the air vent and the dashboard.



Enlarge image

2. Press the thin end of the enclosed gap opener into the gap between the frame surrounding th air vent and the dashboard, to widen the gap. Press the gap opener into the gap in the upper corner of the air vent and slide it downwards, still in the gap, into the position shown in the picture. Press forward on the left side of the Proclip Car Bracket Mount so the angled edge hooks into the gap below the gap opener. Pull out the gap opener.




Enlarge image

3. Press forward on the left side of the Proclip Car Bracket Mount so the angled edge goes all the way into the gap and the adhesive tape attaches.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Citroen Jumper for Australia
Citroen Relay for UK

Fiat Ducato for All Countries

Peugeot Boxer for UK






Brodit ProClip for Fiat Ducato Angled Car Bracket Mount Low #653038

Citroen Jumper Australia / Citroen Relay UK / Fiat Ducato All Countries / Peugeot Boxer UK

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653038

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Fiat Ducato's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Fiat Ducato. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Fiat Ducato Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Loosen the screw inside the cup Car Cradle Mount. Peel off both adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Pull the upper edge of the cup Car Cradle Mount upwards. Press the upper part of the Proclip Car Bracket Mount into the gap. Press down the upper edge of the cup Car Cradle Mount. Tighten the screw.




Enlarge image

3. Hook the angled edge of the lower part of the Proclip Car Bracket Mount into the gap between the upper and the lower part of the control panel.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Citroen Jumper for Australia
Citroen Relay for UK

Fiat Ducato for All Countries

Peugeot Boxer for UK






Brodit ProClip for Fiat Ducato Angled Car Bracket Mount #653034

Citroen Jumper Australia / Citroen Relay UK / Fiat Ducato All Countries / Peugeot Boxer UK

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653034

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

The Proclip Car Bracket Mount is a mounting bracket for the Fiat Ducato's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Fiat Ducato. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Fiat Ducato Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the dashboard and the frame surrounding the air vent to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the right part of the Proclip Car Bracket Mount into the gap between the frame surrounding the control panel and the frame surrounding the air vent.




Enlarge image

3. Press forward on the Proclip Car Bracket Mount so the left edge hooks into the gap above the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Citroen Jumper for Australia
Citroen Relay for UK

Fiat Ducato for All Countries

Peugeot Boxer for UK






Brodit ProClip for Fiat Ducato Right Car Bracket Mount #603878

Citroen Jumper Australia / Citroen Relay UK / Fiat Ducato All Countries / Peugeot Boxer UK

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 603878

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

The Proclip Car Bracket Mount is a mounting bracket for the Fiat Ducato's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Fiat Ducato. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Fiat Ducato Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the angled edge on the left part of the Proclip Car Bracket Mount into the gap between the frame surrounding the air vent and the dashboard.



Enlarge image

2. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the dashboard, to widen the gap. Press the angled edge on the right part of the Proclip Car Bracket Mount into the gap below the gap opener. Pull out the gap opener.




Enlarge image

3. Press forward on the right side of the Proclip Car Bracket Mount so the angled edge goes all the way into the gap and the adhesive tape attaches.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Citroen Jumper for Australia
Citroen Relay for UK

Fiat Ducato for All Countries

Peugeot Boxer for UK






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.