Ford

 
 

 
 
 


Our Price: 24.24 (20.64 ex Vat.)

Item Number: 213512

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Extra strength mounting platform for installation of heavier devices. You can keep your device in a Car Cradle Mount or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford E-Series Vehicles. This is how you fit your Mounting bracket mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read the instructions and look at the pictures carefully before installing the bracket.



Enlarge image

1. Insert the thin end of the enclosed gap opener into the gap around the coin compartment.



Enlarge image

2. Remove the coin compartment. Make sure to detach the wire harness that might be attached to the back side of the compartment.




Enlarge image

3. Place the Proclip Car Bracket Mount over the hole where the coin compartment used to be. Screw the Proclip Car Bracket Mount into place using the enclosed screws. There is no pre-drilling required.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford E-Series for USA






Brodit ProClip for Ford E-Series Center Car Bracket Mount #852367

Ford Cargo Van USA / Ford Econoline USA / Ford Econovan All Countries / Ford E-Series All Countries

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 852367

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford E-Series's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford E-Series. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford E-Series Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thick end of the enclosed gap openers into the gap between the dashboard overhang and the dashboard center panel, to widen the gap. Press forward on the right side of the air vent. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Press the left side of angled edge on the upper part of the Proclip Car Bracket Mount into the gap next to the left gap opener. Press until you see or hear/feel it clicks into place. Press firmly forward on the right upper part of the Proclip Car Bracket Mount so the rest of the angled edge goes into the gap next to the right gap opener. Press until you see or hear/feel it clicks into place.




Enlarge image

3. Press firmly forward on the lower right side of the Proclip Car Bracket Mount so the grooved edges snap over the narrow panel section by the air vent. Press until you see or hear/feel it clicks into place. Adjust the air vent and pull out the gap openers.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Cargo Van for USA
Ford Econoline for USA
Ford Econovan for All Countries
Ford E-Series for All Countries






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 852009

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford E-Series's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford E-Series. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford E-Series Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Open the ashtray. Press the curved edge on the lower part of the Proclip Car Bracket Mount behind the metal edge at pos. 1.



Enlarge image

2. Hook the grooved edge on the upper part of the Proclip Car Bracket Mount over the air vent frame edge at pos. 2.








Ford E-Series for All Countries






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 851839

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford E-Series's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford E-Series. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford E-Series Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

1. Hook the upper part of the Proclip Car Bracket Mount over the panel frame edge at pos. 1.



Enlarge image

2. Hook the lower part of the Proclip Car Bracket Mount under the upper edge of the lower air vent at pos. 2.








Ford E-Series for All Countries






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.