Ford

 
 

 
 
 


Brodit ProClip for Ford Escape Angled Car Bracket Mount #653898

Ford Escape Australia / Mazda Tribute Australia

Our Price: £15.99 (£13.62 ex Vat.)

Item Number: 653898

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Escape's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Escape. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Escape Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1. Attaching part (the smallest part) Part 2. Proclip Car Bracket Mount face plate



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the frame surrounding the center panel, to widen the gap. Peel off the adhesive tape cover on Part 1. Place the angled edge of Part 1 in the gap above the gap opener.



Enlarge image

2. Prize the gap wider with the gap opener, in the same time press the angled edge into the gap and flip Part 1 leftwards so the angled edge hooks behind the frame surrounding the air vent. Pull out the gap opener.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Escape for Australia

Mazda Tribute for Australia






Brodit ProClip for Ford Escape Center Car Bracket Mount #653897

Ford Escape Australia / Mazda Tribute Australia

Our Price: £15.99 (£13.62 ex Vat.)

Item Number: 653897

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Escape's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Escape. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Escape Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1. Attaching part (the smallest part) Part 2. Proclip Car Bracket Mount face plate



Enlarge image

1. Peel off the adhesive tape cover on Part 1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the control panel, to widen the gap. Prize the gap wider with the gap opener, in the same time press the angled edge on Part 1 into the gap above the gap opener. Press Part 1 rightwards so the angled edge hooks behind the control panel. Pull out the gap opener.



Enlarge image

2. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Press the gap opener into the gap in the dashboard overhang. Prize the gap wider with the gap opener, in the same time press the grooved edge on Part 2 into the gap next to the gap opener. Start by pressing the right corner of the grooved edge into the gap, then follow through and press all the edge into the gap. Pull out the gap opener. Slide Part 2 sideway so the holes match with the holes in Part 1.




Enlarge image

3. Screw Part 2 onto Part 1 with the enclosed screws.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Escape for Australia

Mazda Tribute for Australia






Brodit ProClip for Ford Escape Angled Car Bracket Mount #654796

Ford Escape Australia / Ford Kuga Australia / Ford Kuga UK

Our Price: £15.99 (£13.62 ex Vat.)

Item Number: 654796

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 3

The Proclip Car Bracket Mount is a mounting bracket for the vehicle’s dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Escape Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Press the thin end of the enclosed gap opener into the gap between the center console panel frame and the console edge, to widen the gap. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Hook the angled edge on the left side of the Proclip Car Bracket Mount around the center console edge.




Enlarge image

3. Place your index fingers underneath the Proclip Car Bracket Mount and your thumbs on top of the Proclip Car Bracket Mount. Pull the Proclip Car Bracket Mount slightly towards you. Hook the angled edge over the console edge and into the gap above the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Escape for Australia
Ford Kuga for Australia
Ford Kuga for UK






Brodit ProClip for Ford Escape Center Car Bracket Mount #654795

Ford Escape Australia / Ford Kuga Australia / Ford Kuga UK

Our Price: £15.51 (£13.21 ex Vat.)

Item Number: 654795

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

The Proclip Car Bracket Mount is a mounting bracket for the vehicle’s dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Escape Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.  



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the center console panel frame and the padded part of the dashboard, to widen the gap. Press the angled edge on the upper part of the Proclip Car Bracket Mount into the gap next to the gap opener. Pull out the gap opener.



Enlarge image

2 Press the gap opener into the gap betwen  the air vent panel frame and the center console panel frame. Place your fingers onto the lower part of the Proclip Car Bracket Mount as shown in the picture.




Enlarge image

3. With your index fingers press down and with your thumbs press forward so the angled edge on the Proclip Car Bracket Mount goes into the seam/gap next to the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Escape for Australia
Ford Kuga for Australia
Ford Kuga for UK






Our Price: £15.50 (£13.20 ex Vat.)

Item Number: 855071

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket that you attach onto the Ford Escape's dashboard. It provides a perfect mounting platform for mobile phones, or other devices that you want to have within easy reach in the car. Safe, neat and convenient!
 
The Proclip Car Bracket Mount has a perfect fit, it is custom made for each Ford Escape to ensure a secure base for installations. And the Proclip Car Bracket Mount is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed instructions.
 
View demo video 


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Escape Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount. Press the thin end of the enclosed gap opener into the gap between the climate control panel and the dashboard, to widen the gap.



Enlarge image

2. Press the curved edge on the upper part of the Proclip Car Bracket Mount into the gap next to the gap opener. Flip the Proclip Car Bracket Mount downward so the curved upper edge on the upper part of the Proclip Car Bracket Mount hooks behind the climate control panel. Pull out the gap opener.




Enlarge image

3. Pull the Proclip Car Bracket Mount downward and hook the angled edge on the lower part of the Proclip Car Bracket Mount into the gap between the air vent frame and the stereo panel frame. Press upward on the lower part of the Proclip Car Bracket Mount so the angled edge goes all the way into the gap.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Escape for USA






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.