Ford

 
 

 
 
 


Brodit ProClip for Ford Excursion Angled Car Bracket Mount #853547

Ford Excursion USA / Ford F-Series 250 All Countries / Ford F-Series 250 USA / Ford F-Series 350-450 All Countries / Ford F-Series 550-650-750 All Countries

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 853547

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Ford Excursion's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Excursion. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Excursion Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pcitures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap in the console sidewall, to widen the gap. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Press the curved edge on the left part of the Proclip Car Bracket Mount into the gap in the two panel sections.




Enlarge image

3. Flip the right side of the Proclip Car Bracket Mount rightwards so the curved right edge hooks behind the panel. Press firmly forward on the right side of the Proclip Car Bracket Mount so the angled edge snaps into the gap above the gap opener. Pull out the gap opener



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Excursion for USA
Ford F-Series 250 for All Countries
Ford F-Series 250 for USA
Ford F-Series 350-450 for All Countries
Ford F-Series 550-650-750 for All Countries






Brodit ProClip for Ford Excursion Center Car Bracket Mount #853546

Ford Excursion USA / Ford F-Series 250 All Countries / Ford F-Series 250 USA / Ford F-Series 350-450 All Countries / Ford F-Series 550-650-750 All Countries

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 853546

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Ford Excursion's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Excursion. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Excursion Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pcitures before attaching the Proclip Car Bracket Mount.



Enlarge image

1 and 2. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount. Hook the angled edge on the upper part of the Proclip Car Bracket Mount into the gap between the two panel sections on the dashboard.








Ford Excursion for USA
Ford F-Series 250 for All Countries
Ford F-Series 250 for USA
Ford F-Series 350-450 for All Countries
Ford F-Series 550-650-750 for All Countries






Brodit Mounting bracket for Ford Excursion Angled mount. Extra strength mounting platform. NOT for models with the high built in navigation system. #213493

Ford Excursion USA / Ford F-Series 250 USA / Ford F-Series 350-450 USA / Ford F-Series 550-650-750 USA

Our Price: 33.95 (28.91 ex Vat.)

Item Number: 213493

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Extra strength mounting platform for installation of heavier devices. You can keep your device in a Car Cradle Mount or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Excursion Vehicles. This is how you fit your Mounting bracket mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap openers into the seam above the air vent between the vent frame and the padded upper part of the dash, to widen the gap. Peel off the adhesive tape cover on the Proclip Car Bracket Mount.



Enlarge image

2. Press the angled edge on the lower part of the Proclip Car Bracket Mount into the gap between the gap openers.




Enlarge image

3. With one hand, press forward on the faceplate of the Proclip Car Bracket Mount (keeping the lower angled edge into the seam). With yout other hand, press downward on the forward most hooked ede of the Proclip Car Bracket Mount. Flex the Proclip Car Bracket Mount forward and downward. Hook the forward edge of the Proclip Car Bracket Mount over the panel in the vent area. Pull out the gap openers.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Excursion for USA
Ford F-Series 250 for USA
Ford F-Series 350-450 for USA
Ford F-Series 550-650-750 for USA






Brodit Mounting bracket for Ford Excursion Center mount Extra strength mounting platform. NOT for models with the high built in navigation system. #213492

Ford Excursion USA / Ford F-Series 250 USA / Ford F-Series 350-450 USA / Ford F-Series 550-650-750 USA

Our Price: 33.95 (28.91 ex Vat.)

Item Number: 213492

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Extra strength mounting platform for installation of heavier devices. You can keep your device in a Car Cradle Mount or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Excursion Vehicles. This is how you fit your Mounting bracket mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape cover on the Proclip Car Bracket Mount. Hook the angled edge on the upper part of the Proclip Car Bracket Mount into the seam in the defrost vent opening.



Enlarge image

2. While pressing down on the middle section of the Proclip Car Bracket Mount, place your fingers behind the face plate and flex the lower angled edge over the dash overhang.




Enlarge image

3. Press forward on the face plate to make sure the Proclip Car Bracket Mount attaches securely.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Excursion for USA
Ford F-Series 250 for USA
Ford F-Series 350-450 for USA
Ford F-Series 550-650-750 for USA






Brodit ProClip for Ford Excursion Angled Car Bracket Mount #854873

Ford Excursion USA / Ford F-Series 250 USA / Ford F-Series 350-450 USA / Ford F-Series 550-650-750 USA / Ford Super Duty USA

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 854873

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

ONLY for models with high center information screen.

The Proclip Car Bracket Mount is a mounting bracket for the Ford Excursion's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Excursion. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Excursion Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Open the door on top of the dashboard. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel of the adhesive tape cover on the Proclip Car Bracket Mount. Place the lower angled edge of the Proclip Car Bracket Mount under the padded part of the dash top.



Enlarge image

2. Press the upper part of the Proclip Car Bracket Mount forward until the J-shaped angled edge on the top hooks over the dash edge where the dash door is open.




Enlarge image

3. Make certaom the Proclip Car Bracket Mount goes into the seam between the dash top and the inside tray of the box. The door on top of the dash should close easily.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Excursion for USA
Ford F-Series 250 for USA
Ford F-Series 350-450 for USA
Ford F-Series 550-650-750 for USA
Ford Super Duty for USA






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.