Ford

 
 

 
 
 


Our Price: 15.20 (12.94 ex Vat.)

Item Number: 853694

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Explorer Sport Track's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Explorer Sport Track. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Explorer Sport Track Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount conists of two parts. Part 1. Attaching part (the smallest part) Part 2. Proclip Car Bracket Mount faceplate



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the center console panel frame and the console edge, to widen the gap. Peel off the cover of the adhesive tape on Part 1. Place Part 1 in the same position as in the picture, in the same height.



Enlarge image

2. While holding the gap opener in the gap to widen it, press the angled edge firmly into the gap below the gap opener. At the same time bend Part 1 to the right until you hear/feel it snaps into place and the adhesive tape attaches to the console edge. Pull out the gap opener.




Enlarge image

3. Press a screwdriver (Philips) firmly through the predrilled holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape on Part 2 is on the left side attaching to the center console panel frame. Screw Part 2 onto Part 1 using the enclosed screws. When screwing in the lower screw press Part 2 to the right with your thumb for best possible alignment.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Explorer for USA
Ford Explorer Sport Track for USA






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 853693

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Explorer Sport Track's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Explorer Sport Track. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Explorer Sport Track Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. Note: This Proclip Car Bracket Mount fits Ford Explorer Sport Track models with and without navigation screen. It fits black, silver grey and wood grain trim.



Enlarge image

1. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount. Grab the dashboard part with the silver trim and pull the dashboard towards you to widen the vertical gap to the right.



Enlarge image

2. Align the lower left side of the Proclip Car Bracket Mount with the upper narrow slot in the dashboard. While pulling the dashboard towards you, press/hook carefully the angled edge on the left side of the Proclip Car Bracket Mount into the gap between the two panel sections. At the same time flip the Proclip Car Bracket Mount towards the stereo so the angled edge on the left side of the Proclip Car Bracket Mount hooks behind the left panel section.




Enlarge image

3. Hook the angled edge on the right side of the Proclip Car Bracket Mount over the center console edge by the stereo/air vent.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Explorer for USA
Ford Explorer Sport Track for USA






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 852151

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Explorer Sport Track's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Explorer Sport Track. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Explorer Sport Track Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention: Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. Note: The Proclip Car Bracket Mount can be positioned within the width of the stereo.



Enlarge image

1. Clean the surface between the stereo and the air vent panel frame with the enclosed alcohol pad. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount. Press the lower part of the Proclip Car Bracket Mount, with adhesive tape, into the gap between the stereo and the air vent panel frame. Press it all the way in.



Enlarge image

2. Press the thin end of the enclosed gap opener into the gap between the air vent panel frame and the padded dashboard next to the Proclip Car Bracket Mount to widen the gap.




Enlarge image

3. Push the upper part of the Proclip Car Bracket Mount over the panel frame so the angled edge snaps into the gap next to the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place







Ford Explorer for USA
Ford Explorer Sport for USA
Ford Explorer Sport Track for USA
Ford Ranger for USA
Ford Sport Track for Europe

Mazda Truck (B-series) for USA

Mercury Mountaineer for USA






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 833695

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Explorer Sport Track's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Explorer Sport Track. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Explorer Sport Track Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount. Hook the angled edge on the left side of the Proclip Car Bracket Mount over the console edge.



Enlarge image

2. Press firmly down on the right side of the Proclip Car Bracket Mount so the angled edge hooks over the console edge on the side of the console. Press until you see or hear/feel it snaps into place.




Enlarge image

3 and 4. The Proclip Car Bracket Mount is in place.







Ford Explorer for USA
Ford Explorer Sport Track for USA






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.