Ford

 
 

 
 
 


Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653731

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Fiesta's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Fiesta. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Fiesta Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts Part 1. Attaching part (the smallest part) Part 2. Proclip Car Bracket Mount face plate.



Enlarge image

1. Use the enclosed alcohol pad to clean the surface of the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape cover on Part 1. Press the angled edge on Part 1 into the gap between the dashboard and the frame surrounding the control panel.



Enlarge image

2. Press Part 1 towards the steering wheel so the angled edge hooks behind the frame surrounding the control panel.




Enlarge image

3. Open up the predrilled holes in part with a screwdriwer (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Fiesta for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653730

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 3

The Proclip Car Bracket Mount is a mounting bracket for the Ford Fiesta's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Fiesta. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Fiesta Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts Part 1. Attaching part (the smallest part) Part 2. Proclip Car Bracket Mount face plate.



Enlarge image

1. Use the enclosed alcohol pad to clean the surface of the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape cover on Part 1. Press the angled edge on Part 1 into the gap between the dashboard and the frame surrounding the control panel.



Enlarge image

2. Press Part 1 leftwards so the angled edge hooks behind the frame surrounding the control panel.




Enlarge image

3. Open up the predrilled holes in part with a screwdriwer (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Fiesta for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653724

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Fiesta's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Fiesta. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Fiesta Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts Part 1. Attaching part (the smallest part) Part 2. Proclip Car Bracket Mount face plate.



Enlarge image

1. Use the enclosed alcohol pad to clean the surface of the area where the Proclip Car Bracket Mount is to be installed. Press the thin end of the enclosed gap opener into the gap between the dashboard and the frame surrounding the control panel, to widen the gap. Peel off the adhesive tape cover on Part 1. Press the angled edge on Part 1 into the gap next to the gap opener.



Enlarge image

2. Press Part 1 leftwards so the angled edge hooks behind the frame surrounding the control panel. Pull out the gap opener.




Enlarge image

3. Open up the predrilled holes in part with a screwdriwer (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Fiesta for UK






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653055

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Fiesta's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Fiesta. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Fiesta Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Open the glove compartment. Remove the screw in the upper right corner. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the right part of the Proclip Car Bracket Mount into the gap between the buttons and the surrounding frame.




Enlarge image

3. Place the left part of the Proclip Car Bracket Mount over the screwhole so the holes match. Screw back the screw. Close the glove compartment.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Fiesta for UK






Brodit ProClip for Ford Fiesta Angled Car Bracket Mount #653007

Ford Fiesta UK / Ford Puma UK / Ford Puma Thunder UK

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653007

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Fiesta's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Fiesta. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Fiesta Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two part. Part 1. The attaching piece (the smallest part) Part 2. Proclip Car Bracket Mount face plate.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the control panel anf the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press the angled edge of Part 1 into the gap above the gap opener.



Enlarge image

2. Press to the left on Part 1, away from the steering wheel, so the angled edge hooks behind the control panel and the adhesive tape attaches on the dashboard.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screw driver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 over Part 1 so the adhesive tape is to the right and the holes match. Screw Part 2 onto Part 1 by using the enclosed screws.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Fiesta for UK
Ford Puma for UK
Ford Puma Thunder for UK






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.