Ford

 
 

 
 
 


Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 653798

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Fusion's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Fusion. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Fusion Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts Part 1. Attaching part (the smallest part) Part 2. Proclip Car Bracket Mount face plate.



Enlarge image

1. Peel off the adhesive tape cover on Part 1. Press the angled edge on Part 1 into the gap between the frame surrounding the control panel and the dashboard.



Enlarge image

2. Press Part 1 leftwards so the angled edge hooks behind the frame surrounding the control panel.




Enlarge image

3. Open up the predrilled holes in part with a screwdriwer (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Fusion for All Countries






Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 653797

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Fusion's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Fusion. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Fusion Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard, to widen the gap. Open the coin compartment on top of the dashboard. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Press the curved edge on the upper part of the Proclip Car Bracket Mount into the gap between the coin compartment and the dashboard. Flip the Proclip Car Bracket Mount downwards/forwards so the upper curved edge hooks under the coin compartment.




Enlarge image

3. Press the grooved edge on the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener. Press until you hear/feel it snaps into place. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Fusion for All Countries






Our Price: £15.51 (£13.21 ex Vat.)

Item Number: 653193

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Fusion's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Fusion. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Fusion Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1. Attaching piece (the smallest part) Part 2 Proclip Car Bracket Mount face plate.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap next to the gap opener.



Enlarge image

2. Press to the left on Part 1 so the angled edge hooks under/behind the control panel and the adhesive sticks to the dashboard. Pull out the gap opener.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screwdriwer (Philips). Peel off the cover of the adhesive tape onm Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape is to the right. Screw Part 2 onto Part 1 using the enclosed screws. Make sure that the screws go straight into Part 1, in the same angle as Part 1.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Fusion for UK






Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 653192

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Fusion's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Fusion. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Fusion Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Open the hatch to the coin compartment. Press the thin end of the enclosed gap opener into the gap in the control panel, below the hazard-button, to widen the gap. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount. Press the grooved edge on the lower part of the Proclip Car Bracket Mount into the gap to the right of the gap opener.



Enlarge image

2. Slide the Proclip Car Bracket Mount rightwards, towards the steering wheel. Pull out the gap opener.




Enlarge image

3. Hook the upper part of the Proclip Car Bracket Mount, with adhesive tape, over the edge of the coin compartment.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Fusion for UK






Our Price: £15.50 (£13.20 ex Vat.)

Item Number: 805078

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket that you attach onto the Ford Fusion's dashboard. It provides a perfect mounting platform for mobile phones, or other devices that you want to have within easy reach in the car. Safe, neat and convenient!
 
The Proclip Car Bracket Mount has a perfect fit, it is custom made for each Ford Fusion to ensure a secure base for installations. And the Proclip Car Bracket Mount is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed instructions.
 
View demo video 


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Fusion Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read the instructions and look at the pictures before installing the Proclip Car Bracket Mount.  



Enlarge image

1. Insert the enclosed gap opener into the gap below the frame surrounding the air vent, to widen the gap.



Enlarge image

2. Insert the angled lower edge of the Proclip Car Bracket Mount into the gap next to the gap opener. Note the cutouts.




Enlarge image

3. Press the Proclip Car Bracket Mount upward/forward so the angled lower edge goes all the way into the gap. Feel, and if necesary adjust the Proclip Car Bracket Mount sideways, so the cutouts goes into position. Insert the angled upper edge of the Proclip Car Bracket Mount into the gap above the frame surrounding the air vent. Remove the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Fusion for USA
Ford Mondeo for Europe






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.