Ford

 
 

 
 
 


Our Price: 15.20 (12.94 ex Vat.)

Item Number: 852899

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Maverick's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Maverick. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Maverick Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the stereo and the surrounding panel frame, to widen the gap. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount. Press the grooved edge on the left side of the Proclip Car Bracket Mount into the gap below the gap opener. Press until you see or hear/feel it snaps into place. Pull out the gap opener.



Enlarge image

2. Press down on the top corner of the air vent panel frame with your left hand, to widen the gap between the panel frame and the dashboard. Press the thin end of the enclosed gap opener into the gap.




Enlarge image

3. Keep the gap opener in the gap and then press firmly forward on the right side of the Proclip Car Bracket Mount so the angled edge goes into the gap below the gap opener. Press until you see or hear/feel it snaps into place. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Escape for USA
Ford Maverick for Europe






Brodit ProClip for Ford Maverick Center Car Bracket Mount #852672

Ford Maverick Europe / Nissan Terrano II Europe

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 852672

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Maverick's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Maverick. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Maverick Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount



Enlarge image

1. Clean the surface at pos. 2 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Press the upper part of the Proclip Car Bracket Mount, with groove, into the gap at pos 1 between the control panel and the padded dashboard.




Enlarge image

3. Hook the lower part of the Proclip Car Bracket Mount, with adhesive tape, under the edge at pos. 2.







Ford Maverick for Europe

Nissan Terrano II for Europe






Brodit ProClip for Ford Maverick Angled Car Bracket Mount #852188

Ford Maverick Europe / Nissan Terrano II Europe

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 852188

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Maverick's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Maverick. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Maverick Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount



Enlarge image

1. Clean the surface at pos. 2 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Hook the lower part of the Proclip Car Bracket Mount, with curve, into the gap at pos. 1.




Enlarge image

3. Press the upper part of the Proclip Car Bracket Mount, with adhesive tape, against the ledge at pos. 2 so the adhesive tape attaches.







Ford Maverick for Europe

Nissan Terrano II for Europe






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 652899

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 5

The Proclip Car Bracket Mount is a mounting bracket for the Ford Maverick's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Maverick. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Maverick Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the stereo and the surrounding panel frame, to widen the gap. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount. Press the grooved edge on the right side of the Proclip Car Bracket Mount into the gap below the gap opener. Press until you see or hear/feel it snaps into place. Pull out the gap opener.



Enlarge image

2. Press down on the top corner of the air vent panel frame with your right hand, to widen the gap between the panel frame and the dashboard. Press the thin end of the enclosed gap opener into the gap.




Enlarge image

3. Keep the gap opener in the gap and then press firmly forward on the left side of the Proclip Car Bracket Mount so the angled edge goes into the gap below the gap opener. Press until you see or hear/feel it snaps into place. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Escape for UK
Ford Maverick for UK






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 652672

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

The Proclip Car Bracket Mount is a mounting bracket for the Ford Maverick's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Maverick. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Maverick Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount



Enlarge image

1. Clean the surface at pos. 2 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Press the upper part of the Proclip Car Bracket Mount, with groove, into the gap at pos 1 between the control panel and the padded dashboard.




Enlarge image

3. Hook the lower part of the Proclip Car Bracket Mount, with adhesive tape, under the edge at pos. 2.







Ford Maverick for UK

Nissan Terrano II for UK






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.