Ford

 
 

 
 
 


Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 653422

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

The Proclip Car Bracket Mount is a mounting bracket for the Ford Mondeo's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Mondeo. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Mondeo Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Open the glove compartment. Remove the rubber-detail, as shown in the picture. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the angled edge on the right part of the Proclip Car Bracket Mount into the gap between the control panel and the surrounding frame.




Enlarge image

3. Adjust the position of the left part of the Proclip Car Bracket Mount so the predrilled hole fits with the hole in the dashboard. Place the enclosed button in the hole, so the wide plate is touching the Proclip Car Bracket Mount. Press the button all the way into the gap, so the Proclip Car Bracket Mount is locked onto the dashboard.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Mondeo for All Countries






Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 653279

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Mondeo's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Mondeo. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Mondeo Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Place the Proclip Car Bracket Mount as shown on the picture so the right part with adhesive tape is between the buttons in the control panel (do not attach the adhesive tape yet.) Press the grooved edge of the Proclip Car Bracket Mount into the gap between the control panel and the surrounding frame. Start by pressing forwards on the upper part of the Proclip Car Bracket Mount.



Enlarge image

2. Press forwards on the lower part of the Proclip Car Bracket Mount so it goes all the way into the gap.




Enlarge image

3 and 4. The Proclip Car Bracket Mount is in place.







Ford Mondeo for All Countries






Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 653260

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Tilt swivel mount for VDO monitor.

The Proclip Car Bracket Mount is a mounting bracket for the Ford Mondeo's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Mondeo. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Mondeo Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the grooved part of the Proclip Car Bracket Mount into the gap below the gap opener. Press forwards on the upper part of the Proclip Car Bracket Mount, and then on the lower part so it goes all the way into the gap. Pull out the gap opener.




Enlarge image

3 and 4. The Proclip Car Bracket Mount is in place.







Ford Mondeo for Australia
Ford Mondeo for UK






Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 653260

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Tilt swivel mount for VDO monitor.

The Proclip Car Bracket Mount is a mounting bracket for the Ford Mondeo's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Mondeo. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Mondeo Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the grooved part of the Proclip Car Bracket Mount into the gap below the gap opener. Press forwards on the upper part of the Proclip Car Bracket Mount, and then on the lower part so it goes all the way into the gap. Pull out the gap opener.




Enlarge image

3 and 4. The Proclip Car Bracket Mount is in place.







Ford Mondeo for Australia
Ford Mondeo for UK






Our Price: £15.50 (£13.20 ex Vat.)

Item Number: 805078

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket that you attach onto the Ford Mondeo's dashboard. It provides a perfect mounting platform for mobile phones, or other devices that you want to have within easy reach in the car. Safe, neat and convenient!
 
The Proclip Car Bracket Mount has a perfect fit, it is custom made for each Ford Mondeo to ensure a secure base for installations. And the Proclip Car Bracket Mount is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed instructions.
 
View demo video 


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Mondeo Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read the instructions and look at the pictures before installing the Proclip Car Bracket Mount.  



Enlarge image

1. Insert the enclosed gap opener into the gap below the frame surrounding the air vent, to widen the gap.



Enlarge image

2. Insert the angled lower edge of the Proclip Car Bracket Mount into the gap next to the gap opener. Note the cutouts.




Enlarge image

3. Press the Proclip Car Bracket Mount upward/forward so the angled lower edge goes all the way into the gap. Feel, and if necesary adjust the Proclip Car Bracket Mount sideways, so the cutouts goes into position. Insert the angled upper edge of the Proclip Car Bracket Mount into the gap above the frame surrounding the air vent. Remove the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Fusion for USA
Ford Mondeo for Europe






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.