Ford

 
 

 
 
 


Brodit ProClip for Ford Puma Angled Car Bracket Mount #653007

Ford Fiesta UK / Ford Puma UK / Ford Puma Thunder UK

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653007

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Puma's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Puma. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Puma Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two part. Part 1. The attaching piece (the smallest part) Part 2. Proclip Car Bracket Mount face plate.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the control panel anf the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press the angled edge of Part 1 into the gap above the gap opener.



Enlarge image

2. Press to the left on Part 1, away from the steering wheel, so the angled edge hooks behind the control panel and the adhesive tape attaches on the dashboard.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screw driver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 over Part 1 so the adhesive tape is to the right and the holes match. Screw Part 2 onto Part 1 by using the enclosed screws.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Fiesta for UK
Ford Puma for UK
Ford Puma Thunder for UK






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 853007

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Puma's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Puma. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Puma Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two part. Part 1. The attaching piece (the smallest part) Part 2. Proclip Car Bracket Mount face plate.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press the angled edge of Part 1 into the gap above the gap opener.



Enlarge image

2. Press to the right on Part 1, away from the steering wheel, so the angled edge hooks behind the control panel and the adhesive tape attaches on the dashboard.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screw driver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 over Part 1 so the adhesive tape is to the left and the holes match. Screw Part 2 onto Part 1 by using the enclosed screws.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Fiesta for Europe
Ford Puma for Europe






Brodit ProClip for Ford Puma Center Car Bracket Mount #852293

Ford Courier Europe / Ford Fiesta Europe / Ford Puma Europe / Mazda 121 Europe

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 852293

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Puma's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Puma. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Puma Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount



Enlarge image

1. Press the short upper part of the Proclip Car Bracket Mount into the gap at pos. 1.



Enlarge image

2. Press the lower part of the Proclip Car Bracket Mount into the gap at pos. 2.








Ford Courier for Europe
Ford Fiesta for Europe
Ford Puma for Europe

Mazda 121 for Europe






Brodit ProClip for Ford Puma Center Car Bracket Mount #652293

Ford Fiesta UK / Ford Puma UK / Mazda 121 All Countries

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 652293

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Puma's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Puma. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Puma Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount



Enlarge image

1. Press the short upper part of the Proclip Car Bracket Mount into the gap at pos. 1.



Enlarge image

2. Press the lower part of the Proclip Car Bracket Mount into the gap at pos. 2.








Ford Fiesta for UK
Ford Puma for UK

Mazda 121 for All Countries






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.