Ford

 
 

 
 
 


Brodit ProClip for Ford Tourneo Connect Angled Car Bracket Mount #653205

Ford Tourneo Connect UK / Ford Transit Connect All Countries

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653205

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Tourneo Connect's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Tourneo Connect. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Tourneo Connect Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1: Attaching piece (the smallest part) Part 2: Proclip Car Bracket Mount face plate



Enlarge image

1. Press the thin ends of the enclosed gap openers into the gap between the control panel frame and the dashboard to widen the gap. Place the gap openers approx. 10 cm apart. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Press the angled edge on Part 1 into the gap between the gap openers. Press to the left on Part 1, away from the steering wheel, so the angled edge hooks behind the control panel frame and the adhesive attaches to the dashboard. Pull out the gap openers.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive is to the right. Screw Part 2 onto Part 1 with the enclosed screws. NOTE! Screw straight into Part 1, in the same angle as Part 1.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Tourneo Connect for UK
Ford Transit Connect for All Countries






Brodit ProClip for Ford Tourneo Connect Center Car Bracket Mount #653204

Ford Tourneo Connect UK / Ford Transit Connect All Countries

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653204

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Tourneo Connect's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Tourneo Connect. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Tourneo Connect Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the air vent frame and the control panel frame to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Place the Proclip Car Bracket Mount under the gap between the air vent frame and the air vent housing. Press the angled upper edge upwards into the gap, start by pressing one corner into the gap and then press the Proclip Car Bracket Mount all the way into the gap.




Enlarge image

3. Press the grooved edge on the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Tourneo Connect for UK
Ford Transit Connect for All Countries






Brodit ProClip for Ford Tourneo Connect Right Car Bracket Mount #603206

Ford Tourneo Connect UK / Ford Transit Connect All Countries

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 603206

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Tourneo Connect's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Tourneo Connect. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Tourneo Connect Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the air vent frame and the dashboard to widen the gap. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Place the Proclip Car Bracket Mount under the gap between the air vent frame and the air vent housing. Press the angled upper edge upwards into the gap, start by pressing one corner into the gap and then press the Proclip Car Bracket Mount all the way into the gap.




Enlarge image

3. Press the grooved edge on the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Tourneo Connect for UK
Ford Transit Connect for All Countries






Brodit ProClip for Ford Tourneo Connect Angled Car Bracket Mount #854991

Ford Tourneo Connect All Countries / Ford Transit Connect All Countries

Our Price: 15.50 (13.20 ex Vat.)

Item Number: 854991

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Ford Tourneo Connect's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Tourneo Connect. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Tourneo Connect Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before installing the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the left corner of the angled upper edge of the Proclip Car Bracket Mount into the gap dividing the dashboard.



Enlarge image

2. Press the angled edge all the way into the gap.




Enlarge image

3. Press the angled lower edge of the Proclip Car Bracket Mount into the gap above the glove compartment.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Tourneo Connect for All Countries
Ford Transit Connect for All Countries






Brodit ProClip for Ford Tourneo Connect Center Car Bracket Mount #854989

Ford Tourneo Connect All Countries / Ford Transit Connect All Countries

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 854989

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

NOT for Sony Stereo.

The Proclip Car Bracket Mount is a mounting bracket for the Ford Tourneo Connect's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Tourneo Connect. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Tourneo Connect Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Hook the angled edge of the upper part of the Proclip Car Bracket Mount over the lower edge of the air vent.



Enlarge image

2. Press the angled edge on the lower part of the Proclip Car Bracket Mount into the gap between the trim and the panel surrounding the stereo.




Enlarge image

3. Press all of the angled lower edge upward into the gap.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Tourneo Connect for All Countries
Ford Transit Connect for All Countries






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.