Ford

 
 

 
 
 


Brodit ProClip for Ford Transit Right Car Bracket Mount #603906

Ford Transit All Countries / Ford Transit UK / Ford Transit Tourneo All Countries

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 603906

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 3

The Proclip Car Bracket Mount is a mounting bracket for the Ford Transit's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Transit. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Transit Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the angled edge on the upper part of the Proclip Car Bracket Mount into the gap in the upper part of the air vent housing.



Enlarge image

2. Press the lower part of the Proclip Car Bracket Mount upward and forward so the lower edge hooks into the lower part of the air vent.




Enlarge image

3. Place your fingers inside the Proclip Car Bracket Mount and press downward so the adhesive tape attaches.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Transit for All Countries
Ford Transit for UK
Ford Transit Tourneo for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 603648

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Transit's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Transit. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Transit Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the curved edge on the left part of the Proclip Car Bracket Mount into the gap between the frame surrounding the air vent and the dashboard.



Enlarge image

2. Flip the Proclip Car Bracket Mount rightwards/forwards so the curved left edge hooks behind the dashboard.




Enlarge image

3. Press the thin end of the enclosed gap opener into the gap between the



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Transit for All Countries






Our Price: 40.87 (34.80 ex Vat.)

Item Number: 313517

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Extra high mounting platform.

Extra strength mounting platform for installation of heavier devices. You can keep your device in a Car Cradle Mount or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Transit Vehicles. This is how you fit your Mounting bracket mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read the instructions and look at the pictures carefully before installing the mounting bracket. This product consists of three parts: Part 1 - Base part. Part 2 - Middle plate. Part 3 - Mounting plate.



Enlarge image

1. Squeeze together the edges of the rubber inlay and pull it out from the storage compartment.



Enlarge image

2. Insert the base part into the storage compartment hole, with the long pointy edge facing downward/forward so it goes first into the hole. Turn the base part sideways into a vertical position and pull it toward you/upward so it hooks into place inside the hole.




Enlarge image

3. Place the middle plate onto the base part so the holes match. Screw the middle plate onto the base part using the enclosed screws. Place the mounting plate onto the middle plate so the holes match. Screw the mounting plate onto the middle plate using the enclosed screws.



Enlarge image

4. The mounting bracket is in place.







Ford Transit for All Countries






Our Price: 43.65 (37.17 ex Vat.)

Item Number: 213517

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Extra high mounting platform.

Extra strength mounting platform for installation of heavier devices. You can keep your device in a Car Cradle Mount or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Transit Vehicles. This is how you fit your Mounting bracket mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read the instructions and look at the pictures carefully before installing the mounting bracket. This product consists of three parts: Part 1 - Base part. Part 2 - Middle plate. Part 3 - Mounting plate.



Enlarge image

1. Squeeze together the edges of the rubber inlay and pull it out from the storage compartment.



Enlarge image

2. Insert the base part into the storage compartment hole, with the long pointy edge facing downward/forward so it goes first into the hole. Turn the base part sideways into a vertical position and pull it toward you/upward so it hooks into place inside the hole.




Enlarge image

3. Place the middle plate onto the base part so the holes match. Screw the middle plate onto the base part using the enclosed screws. Place the mounting plate onto the middle plate so the holes match. Screw the mounting plate onto the middle plate using the enclosed screws.



Enlarge image

4. The mounting bracket is in place.







Ford Transit for All Countries






Our Price: 40.87 (34.80 ex Vat.)

Item Number: 313509

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

Extra strength mounting platform for installation of heavier devices. You can keep your device in a Car Cradle Mount or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Transit Vehicles. This is how you fit your Mounting bracket mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read the instructions and look at the pictures carefully before installing the mounting bracket. This product consists of three parts: Part 1 - Base part. Part 2 - Middle plate. Part 3 - Mounting plate.



Enlarge image

1. Squeeze together the edges of the rubber inlay and pull it out from the storage compartment.



Enlarge image

2. Insert the base part into the storage compartment hole, with the long pointy edge facing downward/forward so it goes first into the hole. Turn the base part sideways into a vertical position and pull it toward you/upward so it hooks into place inside the hole.




Enlarge image

3. Place the middle plate onto the base part so the holes match. Screw the middle plate onto the base part using the enclosed screws. Place the mounting plate onto the middle plate so the holes match. Screw the mounting plate onto the middle plate using the enclosed screws.



Enlarge image

4. The mounting bracket is in place.







Ford Transit for All Countries






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.