Ford

 
 

 
 
 


Our Price: 15.51 (13.21 ex Vat.)

Item Number: 852661

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Windstar's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Windstar. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Windstar Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention: Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the stereo and the surrounding panel frame, to widen it. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Place the Proclip Car Bracket Mount over the console frame next to the stereo. Press the left side of the Proclip Car Bracket Mount into the gap below the gap opener.




Enlarge image

3. Press firmly forward on the right side of the Proclip Car Bracket Mount so the angled edge on the right side of the Proclip Car Bracket Mount snaps (a squeaky noise will appear but this OK) into the gap between the center console panel frame and the padded part of the dashboard. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount in place.







Ford Windstar for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 852660

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Windstar's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Windstar. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Windstar Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention: Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Place the Proclip Car Bracket Mount over the air vent.



Enlarge image

2. Press firmly forward on the lower part of the Proclip Car Bracket Mount so the grooved edge goes into the gap between the air vent and the padded dashboard ledge. Press until you see or hear/feel it snaps into place.




Enlarge image

3. Press firmly forward on the upper part of the Proclip Car Bracket Mount so the grooved edge goes into the gap between the air vent and the padded dashboard. Press until you see or hear/feel it snaps into place.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Ford Windstar for All Countries






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 852301

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Windstar's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Windstar. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Windstar Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.



Enlarge image

1. Press the left side of the Proclip Car Bracket Mount into the gap between the climate control panel and the surrounding panel frame.



Enlarge image

2. Press forward on the right side of the Proclip Car Bracket Mount so the angled edge snaps into the gap between the panel frame and the padded part of the dashboard. Press until you see or hear/feel it snaps into place.




Enlarge image

3. The Proclip Car Bracket Mount in place.







Ford Windstar for All Countries






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 852153

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Windstar's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Windstar. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Windstar Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.



Enlarge image

1. Press the curved edge on the upper part of the Proclip Car Bracket Mount ino the gap between the air vent panel frame and the padded dashboard. Press until you see or hear/feel it snaps into place.



Enlarge image

2. Press the grooved edge on the lower part of the Proclip Car Bracket Mount into the gap between the air vent panel frame and the padded dashboard ledge by pressing down with your fingers on the flat part of the Proclip Car Bracket Mount and at the same time: push forward on the face of the Proclip Car Bracket Mount with your thumbs. Press until you see or hear/feel it snaps into place.




Enlarge image

3. The Proclip Car Bracket Mount in place.







Ford Windstar for All Countries






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 652661

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Ford Windstar's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Windstar. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Ford Windstar Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention: Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the stereo and the surrounding panel frame, to widen it. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Place the Proclip Car Bracket Mount over the console frame next to the stereo. Press the right side of the Proclip Car Bracket Mount into the gap below the gap opener.




Enlarge image

3. Press firmly forward on the left side of the Proclip Car Bracket Mount so the angled edge on the left side of the Proclip Car Bracket Mount snaps (a squeaky noise will appear but this OK) into the gap between the center console panel frame and the padded part of the dashboard. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount in place.







Ford Windstar for UK






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.