Honda

 
 

 
 
 


Brodit ProClip for Honda Accord Center Car Bracket Mount #653581

Honda Accord All Countries / Honda Accord UK

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653581

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

The Proclip Car Bracket Mount is a mounting bracket for the Honda Accord's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Accord. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Accord Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1. Attaching part (the smallest part) Part 2. Proclip Car Bracket Mount face plate



Enlarge image

1. Press the thin ends of the enclosed gap openers into the gap between the air vent frame and the dashboard, to widen the gap. Place the gap openers about 10 cm apart. Peel off the cover of the adhesive tape on Part 1. Press the angled edge on Part 1 into the gap between the gap openers.



Enlarge image

2. Press Part 1 leftwards, away from the steering wheel, so the angled edge hooks behind the dashboard and the adhesive tape attaches. Pull out the gap openers.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda Accord for All Countries
Honda Accord for UK






Brodit ProClip for Honda Accord Angled Car Bracket Mount #653200

Honda Accord All Countries / Honda Accord Australia

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653200

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Honda Accord's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Accord. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Accord Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1. Attaching part (the smallest part) Part 2. Proclip Car Bracket Mount face plate



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the control panel frame and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap below the gap opener.



Enlarge image

2. Press to the left on Part 1, away from the steering wheel, so the angled edge hooks behind/under the control panel frame and the adhesive tape attaches. Pull out the gap opener.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Remove the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape is on the right side. Screw Part 2 onto Part 1 with the enclosed screw. NOTE! Screw the screws straight into Part 1, in the same angle as Part 1, do not screw the screws into place basing the angle on Part 2.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda Accord for All Countries
Honda Accord for Australia






Brodit ProClip for Honda Accord Center Car Bracket Mount #653581

Honda Accord All Countries / Honda Accord UK

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653581

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

The Proclip Car Bracket Mount is a mounting bracket for the Honda Accord's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Accord. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Accord Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1. Attaching part (the smallest part) Part 2. Proclip Car Bracket Mount face plate



Enlarge image

1. Press the thin ends of the enclosed gap openers into the gap between the air vent frame and the dashboard, to widen the gap. Place the gap openers about 10 cm apart. Peel off the cover of the adhesive tape on Part 1. Press the angled edge on Part 1 into the gap between the gap openers.



Enlarge image

2. Press Part 1 leftwards, away from the steering wheel, so the angled edge hooks behind the dashboard and the adhesive tape attaches. Pull out the gap openers.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda Accord for All Countries
Honda Accord for UK






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653228

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Honda Accord's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Accord. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Accord Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Unscrew the screw in the displayed part of the center console sidewall by turning the screw a few turns counter clock wise and pull the screw and its socket out. Remove the sidewall part.



Enlarge image

2. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount. Place the angled edge on the right side of the Proclip Car Bracket Mount over the console edge so it is aligned towards the hole in the sidewall edge.




Enlarge image

3. Press firmly forward on the left side of the Proclip Car Bracket Mount face plate and at the same time: hook/press the angled edge on the left side of the Proclip Car Bracket Mount into the hole in the sidewall edge. Put the loosened part of the console side wall back into place.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda Accord for All Countries






Brodit ProClip for Honda Accord Angled Car Bracket Mount #653200

Honda Accord All Countries / Honda Accord Australia

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653200

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Please note this clip may not

The Proclip Car Bracket Mount is a mounting bracket for the Honda Accord's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Accord. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Accord Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1. Attaching part (the smallest part) Part 2. Proclip Car Bracket Mount face plate



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the control panel frame and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap below the gap opener.



Enlarge image

2. Press to the left on Part 1, away from the steering wheel, so the angled edge hooks behind/under the control panel frame and the adhesive tape attaches. Pull out the gap opener.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Remove the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape is on the right side. Screw Part 2 onto Part 1 with the enclosed screw. NOTE! Screw the screws straight into Part 1, in the same angle as Part 1, do not screw the screws into place basing the angle on Part 2.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda Accord for All Countries
Honda Accord for Australia






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.