Honda

 
 

 
 
 


Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653941

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Honda CR-V's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda CR-V. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda CR-V Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Open the glove compartment door. Press the thin end of the enclosed gap opener into the gap between the dashboard ledge and the glove compartment frame, to widen the gap. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Hold the Proclip Car Bracket Mount in a horizontal position and press the angled edge on the upper part of the Proclip Car Bracket Mount into the gap next to the gap opener. Pull out the gap opener.




Enlarge image

3. Flip the Proclip Car Bracket Mount down, towards the floor, and hook the angled edge on the lower part of the Proclip Car Bracket Mount into the gap underneath the dashboard overhang.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda CR-V for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653940

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

The Proclip Car Bracket Mount is a mounting bracket for the Honda CR-V's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda CR-V. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda CR-V Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount. Press the curved edge on the right side of the Proclip Car Bracket Mount into the gap between the instrument window and the surrounding panel frame, towards the upper corner.



Enlarge image

2. While keeping the curved edge in the gap, slide the Proclip Car Bracket Mount down towards the instrument panel frame ledge.




Enlarge image

3. Press the thin end of the enclosed gap opener into the gap between the dashboard and the center console trim, to widen the gap. Push the Proclip Car Bracket Mount to the left so the angled edge on the left side of the Proclip Car Bracket Mount goes into the gap above the gap opener. Press firmly forward on the Proclip Car Bracket Mount faceplate until you see or hear/feel it clip into place. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda CR-V for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653099

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

ONLY for silver/grey wood grain panel.

The Proclip Car Bracket Mount is a mounting bracket for the Honda CR-V's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda CR-V. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda CR-V Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Remove the screw below the air vent, in the frame surrounding the air vent. Peel off the adhesive tape cover on the Proclip Car Bracket Mount.



Enlarge image

2. Place/Hook the Proclip Car Bracket Mount over the air vent panel edge so the hole in the Proclip Car Bracket Mount matches the hole from the removed screw.




Enlarge image

3. Put the enclosed screw through the hole in the Proclip Car Bracket Mount (hold it slightly angled) and into the hole in the panel and screw it all the way in.



Enlarge image

4. The Proclip Car Bracket Mount in place.







Honda CR-V for UK






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653058

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

NOT for silver/grey wood grain panel.

The Proclip Car Bracket Mount is a mounting bracket for the Honda CR-V's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda CR-V. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda CR-V Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Remove the screw below the air vent, in the frame surrounding the air vent. Peel off the adhesive tape cover on the Proclip Car Bracket Mount.



Enlarge image

2. Place/Hook the Proclip Car Bracket Mount over the air vent panel edge so the hole in the Proclip Car Bracket Mount matches the hole from the removed screw.




Enlarge image

3. Put the enclosed screw through the hole in the Proclip Car Bracket Mount (hold it slightly angled) and into the hole in the panel and screw it all the way in.



Enlarge image

4. The Proclip Car Bracket Mount in place.







Honda CR-V for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653057

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

NOT for silver/grey wood grain panel.

The Proclip Car Bracket Mount is a mounting bracket for the Honda CR-V's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda CR-V. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda CR-V Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Remove the screw below the air vent, in the frame surrounding the air vent. Peel off the adhesive tape cover on the Proclip Car Bracket Mount.



Enlarge image

2. Place/Hook the Proclip Car Bracket Mount over the air vent panel edge so the hole in the Proclip Car Bracket Mount matches the hole from the removed screw.




Enlarge image

3. Put the screw through the hole in the Proclip Car Bracket Mount (hold it slightly angled) and into the hole in the panel and screw it all the way in.



Enlarge image

4. The Proclip Car Bracket Mount in place.







Honda CR-V for All Countries






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.