Honda

 
 

 
 
 


Brodit ProClip for Honda Civic Si Center Car Bracket Mount #854883

Honda Civic USA / Honda Civic Hybrid USA / Honda Civic Si USA

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 854883

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Honda Civic Si's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Civic Si. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Civic Si Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Lower the center vent louvers to make the installation easier. Press the thin end of the enclosed gap opener into the gap between the silver vent frame and the inner part of the vent, to widen the gap. This is a very tight seam but there is a seam between the frame and the vent.



Enlarge image

2. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape cover on the Proclip Car Bracket Mount. Insert the corner of the angled lower edge of the Proclip Car Bracket Mount into the seam between the silver vent frame and the inner part of the vent.




Enlarge image

3. Flex the Proclip Car Bracket Mount together and insert the angled upper part of the Proclip Car Bracket Mount into the gap next to the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda Civic for USA
Honda Civic Hybrid for USA
Honda Civic Si for USA






Brodit ProClip for Honda Civic Si Left Car Bracket Mount #804655

Honda Civic All Countries / Honda Civic USA / Honda Civic Hybrid All Countries / Honda Civic Hybrid USA / Honda Civic Si USA

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 804655

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Honda Civic Si's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Civic Si. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Civic Si Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the seam/gap between the two dashboard parts, to widen the gap. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape cover on the Proclip Car Bracket Mount. Press the angled edge on the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener. Pull out the gap opener.



Enlarge image

2. Push/slide the Proclip Car Bracket Mount to the right until it stops.




Enlarge image

3. Press the gap opener into the seam/gap between the two dashboard parts. Press forward on the upper part of the Proclip Car Bracket Mount so the angled edge goes into the gap next to the gap opener. Press until you see or hear/feel it click into place. Press down on top of the Proclip Car Bracket Mount to make sure the angled edge is all the way into the gap.Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda Civic for All Countries
Honda Civic for USA
Honda Civic Hybrid for All Countries
Honda Civic Hybrid for USA
Honda Civic Si for USA






Brodit ProClip for Honda Civic Si Angled Car Bracket Mount #854654

Honda Civic All Countries / Honda Civic USA / Honda Civic Hybrid All Countries / Honda Civic Hybrid USA / Honda Civic Si USA

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 854654

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

ONLY for models with a round or knob style temperature control. (NOT for automatic climate control.)

The Proclip Car Bracket Mount is a mounting bracket for the Honda Civic Si's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Civic Si. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Civic Si Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Press the thin end of the enclosed gap opener into the gap between the dashboard panel overhang and the climate control panel, to widen the gap just to the left of the fan control knob or button. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount. Hold the Proclip Car Bracket Mount in a 90 degree angle. Press the angled edge on the upper part of the Proclip Car Bracket Mount into the gap next to the gap opener.



Enlarge image

2. Flip the Proclip Car Bracket Mount downward so the angled edge on the upper part of the Proclip Car Bracket Mount hooks behind the dashboard panel overhang. Pull out the gap opener. Press firmly forward on the lower part of the Proclip Car Bracket Mount so the angled lower edge goes into the seem/gap underneath the climate control panel overhang. Press until you hear/feel it snaps into place.




Enlarge image

3. Press upward at the bottom part of the Proclip Car Bracket Mount to make sure the angled edge is all the way into the gap.



Enlarge image

4. The Proclip Car Bracket Mount is in place,







Honda Civic for All Countries
Honda Civic for USA
Honda Civic Hybrid for All Countries
Honda Civic Hybrid for USA
Honda Civic Si for USA






Brodit ProClip for Honda Civic Si Center Car Bracket Mount #853808

Acura CSX USA / Honda Civic USA / Honda Civic Hybrid All Countries / Honda Civic Si USA

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 853808

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Honda Civic Si's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Civic Si. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Civic Si Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin ends of the enclosed gap openers into the gap between the frame surrounding the air vent and the dashboard, to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the angled upper edge of the Proclip Car Bracket Mount into the gap between the gap openers. Pull out the gap openers.




Enlarge image

3. Hook the angled edge on the lower part of the Proclip Car Bracket Mount under the upper edge of the air vent.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Acura CSX for USA

Honda Civic for USA
Honda Civic Hybrid for All Countries
Honda Civic Si for USA






Brodit ProClip for Honda Civic Si Console Car Bracket Mount #833810

Acura CSX USA / Honda Civic USA / Honda Civic Hybrid All Countries / Honda Civic Si USA

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 833810

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Honda Civic Si's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Civic Si. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Civic Si Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Place the left part of the Proclip Car Bracket Mount over the console edge.



Enlarge image

2. Press downwards on the right side of the Proclip Car Bracket Mount so the angled right edge hooks under the console. Press on the Proclip Car Bracket Mount so the adhesive tapes attach.




Enlarge image

3 and 4. The Proclip Car Bracket Mount is in place.







Acura CSX for USA

Honda Civic for USA
Honda Civic Hybrid for All Countries
Honda Civic Si for USA






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.