Honda

 
 

 
 
 


Brodit ProClip for Honda Odyssey Angled Car Bracket Mount #653244

Honda Odyssey Australia / Honda Odyssey UK

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 653244

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Honda Odyssey's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Odyssey. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Odyssey Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the dashboard frame and the dashboard ledge, to widen the gap.



Enlarge image

2. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount. Press the thin edge on the lower part of the Proclip Car Bracket Mount all the way into the gap between the stereo and the center console panel.




Enlarge image

3. Press forward on the upper part of the Proclip Car Bracket Mount so the angled edge snaps into the gap next to the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda Odyssey for Australia
Honda Odyssey for UK






Brodit ProClip for Honda Odyssey Angled Car Bracket Mount #653244

Honda Odyssey Australia / Honda Odyssey UK

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 653244

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Honda Odyssey's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Odyssey. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Odyssey Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the dashboard frame and the dashboard ledge, to widen the gap.



Enlarge image

2. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount. Press the thin edge on the lower part of the Proclip Car Bracket Mount all the way into the gap between the stereo and the center console panel.




Enlarge image

3. Press forward on the upper part of the Proclip Car Bracket Mount so the angled edge snaps into the gap next to the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda Odyssey for Australia
Honda Odyssey for UK






Brodit ProClip for Honda Odyssey Center Car Bracket Mount #653243

Honda Odyssey Australia / Honda Odyssey UK

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 653243

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Honda Odyssey's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Odyssey. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Odyssey Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. Note: The Proclip Car Bracket Mount can also be attached over the right air vent. This instruction applies for both placements.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the air vent frame and the center dash panel frame, to widen the gap. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Press the angled edge on the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener.




Enlarge image

3. Press down on top of the Proclip Car Bracket Mount so the thin edge goes into the air vent and attaches to the upper inside part of the frame. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda Odyssey for Australia
Honda Odyssey for UK






Brodit ProClip for Honda Odyssey Center Car Bracket Mount #653243

Honda Odyssey Australia / Honda Odyssey UK

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 653243

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Honda Odyssey's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Odyssey. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Odyssey Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. Note: The Proclip Car Bracket Mount can also be attached over the right air vent. This instruction applies for both placements.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the air vent frame and the center dash panel frame, to widen the gap. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Press the angled edge on the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener.




Enlarge image

3. Press down on top of the Proclip Car Bracket Mount so the thin edge goes into the air vent and attaches to the upper inside part of the frame. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda Odyssey for Australia
Honda Odyssey for UK






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 653167

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Honda Odyssey's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Odyssey. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Odyssey Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin ends of the enclosed gap openers into the gap between the dashboard and the control panel to widen the gap. Place the gap openers approx. 10 cm apart.



Enlarge image

2. Press the curved edge on the Proclip Car Bracket Mount into the gap between the gap openers.




Enlarge image

3. Press the Proclip Car Bracket Mount together by pressing the angled part towards the face plate: in the same time press downwards and forwards so the angled edge hooks into the gap between the dashboard and the panel surrouding the air vent. Pull out the gap openers.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Honda Odyssey for Australia






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.