Honda

 
 

 
 
 


Brodit ProClip for Honda Passport Angled Car Bracket Mount #852789

Honda Passport All Countries / Isuzu Amigo USA / Isuzu Campo All Countries / Isuzu Rodeo All Countries / Opel Frontera Europe

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 852789

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Honda Passport's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Passport. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Passport Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap at to widen the gap between the dashboard and the frame surrounding the control panel. Peel off both adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the right part of the Proclip Car Bracket Mount into the gap below the gap opener.




Enlarge image

3. Press forward/towards the steering wheel so the left part snaps into the gap between the control panel and the surrounding frame. Pull out the gap opener.



Enlarge image

4. Proclip Car Bracket Mount in place.







Honda Passport for All Countries

Isuzu Amigo for USA
Isuzu Campo for All Countries
Isuzu Rodeo for All Countries

Opel Frontera for Europe






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 852551

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Honda Passport's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Passport. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Passport Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.



Enlarge image

1. Press the enclosed Gap opener into the gap between the climate control panel and the surrounding panel frame to widen the gap.



Enlarge image

2. Press the part of the Proclip Car Bracket Mount with curved edge into the gap next to the Gap opener and slide the Proclip Car Bracket Mount to the left. Pull out the Gap opener.




Enlarge image

3. Press the enclosed Gap opener into the gap between the padded dashboard and the panel frame to widen the gap, and then push forward on the upper part of the Proclip Car Bracket Mount so the angled edge snaps into the gap next to the Gap opener. Note: If the angled edge doesn't snap into place, place your fingers on top of the edge and press down so it snaps in. Pull out the Gap opener.



Enlarge image

4. The Proclip Car Bracket Mount in place.







Honda Passport for All Countries

Isuzu Amigo for USA
Isuzu Campo for USA
Isuzu Rodeo for All Countries
Isuzu Rodeo Sport for All Countries

Opel Frontera for Europe






Brodit ProClip for Honda Passport Center Car Bracket Mount #852377

Honda Passport All Countries / Isuzu Campo USA / Isuzu Rodeo All Countries / Opel Campo Europe / Opel Frontera Europe

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 852377

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Honda Passport's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Passport. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Passport Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount. Clean the surface on the air vent ledge with the enclosed alcohol pad. Peel off the adhesive tape cover on the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the climate control panel and the surrounding panel frame to widen the gap.



Enlarge image

2. Press the curved edge on the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener.




Enlarge image

3. Adjust the position of the Proclip Car Bracket Mount by sliding it to the left. Place the upper part of the Proclip Car Bracket Mount, with adhesive tape, onto the ledge and press down on top if it for best possible attachment.



Enlarge image

4. The Proclip Car Bracket Mount in place.







Honda Passport for All Countries

Isuzu Campo for USA
Isuzu Rodeo for All Countries

Opel Campo for Europe
Opel Frontera for Europe






Brodit ProClip for Honda Passport Angled Car Bracket Mount #851843

Honda Passport All Countries / Isuzu Campo USA / Isuzu Pickup Europe / Isuzu Rodeo All Countries / Opel Frontera Europe

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 851843

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Honda Passport's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Passport. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Passport Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the angled edge on the upper part of the Proclip Car Bracket Mount all the way into the gap at pos. 1.



Enlarge image

2. Pull the Proclip Car Bracket Mount downwards and hook the angled edge on the lower part of the Proclip Car Bracket Mount under the edge at pos. 2.








Honda Passport for All Countries

Isuzu Campo for USA
Isuzu Pickup for Europe
Isuzu Rodeo for All Countries

Opel Frontera for Europe






Brodit ProClip for Honda Passport Console Car Bracket Mount #832552

Honda Passport All Countries / Isuzu Amigo USA / Isuzu Campo USA / Isuzu Rodeo All Countries

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 832552

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Honda Passport's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Passport. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Honda Passport Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Clean the surface on top of the console frame at pos.1. with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Hook the right part of the Proclip Car Bracket Mount over the console frame at pos.1.




Enlarge image

3. Press down the left part of the Proclip Car Bracket Mount towards the floor so the narrow angled edge hooks under the edge of the console frame at pos.2.







Honda Passport for All Countries

Isuzu Amigo for USA
Isuzu Campo for USA
Isuzu Rodeo for All Countries






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.