Infiniti

 
 

 
 
 


Brodit ProClip for Infiniti FX37 Angled Car Bracket Mount #654242

Infiniti FX35 UK / Infiniti FX37 UK / Infiniti FX50 UK / Infiniti QX70 UK

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 654242

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Infiniti FX37's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Infiniti FX37. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Infiniti FX37 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. It is important to place the Proclip Car Bracket Mount in the exact same position as shown in the pictures. This Proclip Car Bracket Mount is devided into two parts. Part 1: Attaching part (the smallest part). Part 2: Proclip Car Bracket Mount face plate.



Enlarge image

1. Peel off the cover of the adhesive tape on Part 1. Place the thin edge against the seam/gap between the center console panel frame and the console edge. Place Part 1 so the top is aligned with the seam above the CD slot.



Enlarge image

2. Press the thin edge firmly into the gap and at the same time bend Part 1 to the left until you see or hear/feel it click into place.




Enlarge image

3. Press a screwdriver (Philips) firmly through the predrilled holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape on Part 2 is on the right side. Do not press the tape to the center console panel frame yet. Screw Part 2 onto Part 1 using the enclosed screws. Right before you tighten the screws press the Proclip Car Bracket Mount to the left with your thumb for optimal adjustment of the mount. Then press the adhesive tape on the right side of Part 2 to the center panel. Hold the Proclip Car Bracket Mount in that position and tighten the screws.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Infiniti FX35 for UK
Infiniti FX37 for UK
Infiniti FX50 for UK
Infiniti QX70 for UK






Brodit ProClip for Infiniti FX37 Right Car Bracket Mount #604243

Infiniti FX35 UK / Infiniti FX37 All Countries / Infiniti FX50 All Countries / Infiniti QX70 UK

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 604243

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Infiniti FX37's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Infiniti FX37. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Infiniti FX37 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount. Hook the angled edge on the lower part of the Proclip Car Bracket Mount into/around the air vent in the A-post panel.



Enlarge image

2. Flip/push the upper part of the Proclip Car Bracket Mount towards the windshield.




Enlarge image

3. Press firmly upwards with your right hand on the bottom part of the Proclip Car Bracket Mount and rightward on the left side of the Proclip Car Bracket Mount with your other hand. When the angled edge on the upper part of the Proclip Car Bracket Mount meets the windshield, press down on the leftt corner of the Proclip Car Bracket Mount to get the angled edge goes into the gap between the windshield and the A-post panel. Then continue to press down over to the right corner of the Proclip Car Bracket Mount.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Infiniti FX35 for UK
Infiniti FX37 for All Countries
Infiniti FX50 for All Countries
Infiniti QX70 for UK






Brodit ProClip for Infiniti FX37 Angled Car Bracket Mount #854242

Infiniti FX35 USA / Infiniti FX37 All Countries / Infiniti FX50 All Countries / Infiniti QX70 All Countries

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 854242

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Infiniti FX37's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Infiniti FX37. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Infiniti FX37 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. It is important to place the Proclip Car Bracket Mount in the exact same position as shown in the pictures. This Proclip Car Bracket Mount is devided into two parts. Part 1: Attaching part (the smallest part). Part 2: Proclip Car Bracket Mount face plate.



Enlarge image

1. Peel off the cover of the adhesive tape on Part 1. Place the thin edge against the seam/gap between the center console panel frame and the console edge. Place Part 1 so the top is aligned with the seam above the CD slot.



Enlarge image

2. Press the thin edge firmly into the gap and at the same time bend Part 1 to the right until you see or hear/feel it click into place.




Enlarge image

3. Press a screwdriver (Philips) firmly through the predrilled holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape on Part 2 is on the left side. Do not press the tape to the center console panel frame yet. Screw Part 2 onto Part 1 using the enclosed screws. Right before you tighten the screws press the Proclip Car Bracket Mount to the right with your thumb for optimal adjustment of the mount. Then press the adhesive tape on the left side of Part 2 to the center panel. Hold the Proclip Car Bracket Mount in that position and tighten the crews.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Infiniti FX35 for USA
Infiniti FX37 for All Countries
Infiniti FX50 for All Countries
Infiniti QX70 for All Countries






Brodit ProClip for Infiniti FX37 Left Car Bracket Mount #804243

Infiniti FX35 USA / Infiniti FX37 All Countries / Infiniti FX50 All Countries / Infiniti QX70 All Countries

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 804243

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Infiniti FX37's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Infiniti FX37. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Infiniti FX37 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount. Hook the angled edge on the lower part of the Proclip Car Bracket Mount into/around the air vent in the A-post panel.



Enlarge image

2. Flip/push the upper part of the Proclip Car Bracket Mount towards the windshield.




Enlarge image

3. Press firmly upwards with your left hand on the bottom part of the Proclip Car Bracket Mount and leftward on the right side of the Proclip Car Bracket Mount with your other hand. When the angled edge on the upper part of the Proclip Car Bracket Mount meets the windshield, press down on the right corner of the Proclip Car Bracket Mount to get the angled edge goes into the gap between the windshield and the A-post panel. Then continue to press down over to the left corner of the Proclip Car Bracket Mount.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Infiniti FX35 for USA
Infiniti FX37 for All Countries
Infiniti FX50 for All Countries
Infiniti QX70 for All Countries






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.