Infiniti

 
 

 
 
 


Our Price: 15.20 (12.94 ex Vat.)

Item Number: 854022

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Infiniti G37 Coupe's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Infiniti G37 Coupe. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Infiniti G37 Coupe Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap openers into the gap between the center console panel frame and the console edge, to widen it. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Press the curved edge on the left side of the Proclip Car Bracket Mount into the gap between the gap openers. Flip the Proclip Car Bracket Mount towards the glove compartment so the curved edge hooks behind the center console panel. Pull out the gap openers.




Enlarge image

3. Press the gap openers into the gap in the console sidewall. Press firmly forward on the right side of the Proclip Car Bracket Mount, so the angled edge goes into the gap between the gap openers. Press until you see or feel it snaps into place. Then press on the side of the Proclip Car Bracket Mount to make sure the angled edge is all the way into the gap. Pull out the gap openers.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Infiniti G25 for USA
Infiniti G35 Coupe for USA
Infiniti G35 Sedan for USA
Infiniti G37 for USA
Infiniti G37 Coupe for USA
Infiniti G37 Sedan for USA
Infiniti Q40 for USA






Brodit ProClip for Infiniti G37 Coupe Console Car Bracket Mount #834862

Infiniti G37 Coupe USA / Infiniti G37 Sedan USA

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 834862

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

ONLY for automatic gear shift. NOT for Anniversary Edition.

The Proclip Car Bracket Mount is a mounting bracket for the Infiniti G37 Coupe's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Infiniti G37 Coupe. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Infiniti G37 Coupe Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap openers into the gap between the center console panel frame and the console edge, to widen it. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Align the front part of the Proclip Car Bracket Mount as shown in the picture. Press the angled edge on the right part of the Proclip Car Bracket Mount into the gap between the gap openers.




Enlarge image

3. Press firmly down on the left part of the Proclip Car Bracket Mount so the angled edge hooks around the console sidewall edge by the floor carpet. Press until you see or hear/feel it snaps into place. Pull out the gap openers.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Infiniti G37 Coupe for USA
Infiniti G37 Sedan for USA






Brodit ProClip for Infiniti G37 Coupe Console Car Bracket Mount #834023

Infiniti G35 Coupe USA / Infiniti G35 Sedan USA / Infiniti G37 USA / Infiniti G37 Coupe USA

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 834023

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

ONLY for automatic gear shift.

The Proclip Car Bracket Mount is a mounting bracket for the Infiniti G37 Coupe's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Infiniti G37 Coupe. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Infiniti G37 Coupe Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap openers into the gap between the center console panel frame and the console edge, to widen it. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the cover of adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Align the front part of the Proclip Car Bracket Mount as shown in the picture. Press the angled edge on the right part of the Proclip Car Bracket Mount into the gap between the gap openers.




Enlarge image

3. Press firmly down on the left part of the Proclip Car Bracket Mount so the angled edge hooks around the console sidewall edge by the floor carpet. Press until you see or hear/feel it snaps into place. Pull out the gap openers.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Infiniti G35 Coupe for USA
Infiniti G35 Sedan for USA
Infiniti G37 for USA
Infiniti G37 Coupe for USA






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.