MAN

 
 

 
 
 


Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653993

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the MAN TG-series's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the MAN TG-series. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your MAN TG-series Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Open the ashtray. Loosen the screws by the upper edge of the ashtray. Open the glove compartment.



Enlarge image

2. Press the thin end of the enlcsed gap opener into the gap between the panel and the dashboard, to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the curved edge on the lower part of the Proclip Car Bracket Mount into the gap between the frame surrounding the glove compartment and the dashboard.




Enlarge image

3. Flip the Proclip Car Bracket Mount upward/forward so the curved lower edge hooks behind the frame surrounding the glove compartment. Press/hook the angled edge on the upper part of the Proclip Car Bracket Mount into the gap between the panel and the dashboard. Pull out the gap opener. Retighten the screws by the ashtrey. Close the glove compartment.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







MAN TG-series for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653148

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the MAN TG-series's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the MAN TG-series. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your MAN TG-series Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount. Hook the long upper part of the Proclip Car Bracket Mount into the gap on top of the dashboard.



Enlarge image

2. Pull the Proclip Car Bracket Mount towards you. Hook the lower part of the Proclip Car Bracket Mount under the edge of the dashboard so the adhesive attaches.




Enlarge image

3 and 4. The Proclip Car Bracket Mount is in place.







MAN TG-series for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 603149

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

The Proclip Car Bracket Mount is a mounting bracket for the MAN TG-series's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the MAN TG-series. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your MAN TG-series Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Peel off the covers of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Pull out the rubber covering the panel and hook the angled edge on the right side of the Proclip Car Bracket Mount over the panel edge. Push the rubber back in place.




Enlarge image

3. Press forward on the left side of the Proclip Car Bracket Mount so the angled edge on the left side hooks over the panel edge by the windshield.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







MAN TG-series for All Countries






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 853993

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the MAN TG-series's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the MAN TG-series. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your MAN TG-series Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Open the ashtray. Loosen the screws by the upper edge of the ashtray. Open the glove compartment.



Enlarge image

2. Press the thin end of the enlcsed gap opener into the gap between the panel and the dashboard, to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the curved edge on the lower part of the Proclip Car Bracket Mount into the gap between the frame surrounding the glove compartment and the dashboard.




Enlarge image

3. Flip the Proclip Car Bracket Mount upward/forward so the curved lower edge hooks behind the frame surrounding the glove compartment. Press/hook the angled edge on the upper part of the Proclip Car Bracket Mount into the gap between the panel and the dashboard. Pull out the gap opener. Retighten the screws by the ashtrey. Close the glove compartment.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







MAN TG-series for Europe






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 853148

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the MAN TG-series's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the MAN TG-series. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your MAN TG-series Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount. Hook the long upper part of the Proclip Car Bracket Mount into the gap on top of the dashboard.



Enlarge image

2. Pull the Proclip Car Bracket Mount towards you. Hook the lower part of the Proclip Car Bracket Mount under the edge of the dashboard so the adhesive attaches.




Enlarge image

3 and 4. The Proclip Car Bracket Mount is in place.







MAN TG-series for Europe






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.