Skoda

 
 

 
 
 


Our Price: 16.48 (14.03 ex Vat.)

Item Number: 855216

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Skoda Yeti's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Yeti. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Skoda Yeti Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Press the thin end of the enclosed gap opener into the gap between the center console and the dashboard, to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the angled edge on the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener. Flip the Proclip Car Bracket Mount upward/forward so the angled lower edge hooks behind the center console. Pull out the gap opener.




Enlarge image

3. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard. Hook the angled edge on the upper part of the Proclip Car Bracket Mount into the gap next to the gap opener. Press down on top of the Proclip Car Bracket Mount so the angled edge goes all the way into the gap. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Skoda Yeti for Europe






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 655216

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

The Proclip Car Bracket Mount is a mounting bracket for the Skoda Yeti's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Yeti. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Skoda Yeti Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Press the thin end of the enclosed gap opener into the gap between the center console and the dashboard, to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the angled edge on the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener. Flip the Proclip Car Bracket Mount upward/forward so the angled lower edge hooks behind the center console. Pull out the gap opener.




Enlarge image

3. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard. Hook the angled edge on the upper part of the Proclip Car Bracket Mount into the gap next to the gap opener. Press down on top of the Proclip Car Bracket Mount so the angled edge goes all the way into the gap. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Skoda Yeti for All Countries






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 854587

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

ONLY for models with Amundsen stereo.

The Proclip Car Bracket Mount is a mounting bracket for the Skoda Yeti's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Yeti. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Skoda Yeti Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enlcosed alochol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Press the thin end of the enclosed gap opener into the gap between the stereo and the surrounding frame, to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the angled edge of the left part of the Proclip Car Bracket Mount into the gap below the gap opener. Pull out the gap opener.



Enlarge image

2. Press the gap opener into the gap in the center console sidewall. Press forward on the right side of the Proclip Car Bracket Mount so the angled right edge hooks into the gap above the gap opener.




Enlarge image

3. Continue pressing until you hear/feel it snaps into place properly. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Skoda Yeti for Europe






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 654587

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 3

ONLY for models with Amundsen stereo.

The Proclip Car Bracket Mount is a mounting bracket for the Skoda Yeti's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Yeti. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Skoda Yeti Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enlcosed alochol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Press the thin end of the enclosed gap opener into the gap between the stereo and the surrounding frame, to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the angled edge of the right part of the Proclip Car Bracket Mount into the gap below the gap opener. Pull out the gap opener.



Enlarge image

2. Press the gap opener into the gap in the center console sidewall. Press forward on the left side of the Proclip Car Bracket Mount so the angled left edge hooks into the gap above the gap opener.




Enlarge image

3. Continue pressing until you hear/feel it snaps into place properly. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Skoda Yeti for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 804395

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Skoda Yeti's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Yeti. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Skoda Yeti Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Pull out the rubber sealent on the A-post slightly to widen the gap. Press the angled edge on the lower part of the Proclip Car Bracket Mount into the gap and hook it around the A-post.



Enlarge image

2. Press the upper part of the Proclip Car Bracket Mount leftward so the angled edge hooks around the A-post.




Enlarge image

3 and 4. The Proclip Car Bracket Mount is in place.







Skoda Yeti for Europe






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.