Toyota

 
 

 
 
 


Brodit ProClip for Toyota AYGO Angled Car Bracket Mount #653717

Citroen C1 All Countries / Peugeot 107 All Countries / Toyota AYGO All Countries

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653717

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

The Proclip Car Bracket Mount is a mounting bracket for the Toyota AYGO's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota AYGO. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota AYGO Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the control panel and the surrounding frame, to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the curved edge on the right part of the Proclip Car Bracket Mount into the gap above the gap opener.



Enlarge image

2. Flip the Proclip Car Bracket Mount leftwards so the curved right edge hooks behind the control panel. Pull out the gap opener. Press the gap opener into the gap between the center console and the dashboard.




Enlarge image

3. Press the left end of the Proclip Car Bracket Mount slightly against the center console sidewall, in the same time slide/press the Proclip Car Bracket Mount upwards so the left edge goes into the gap above the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Citroen C1 for All Countries

Peugeot 107 for All Countries

Toyota AYGO for All Countries






Brodit ProClip for Toyota AYGO Center Car Bracket Mount #653716

Citroen C1 All Countries / Peugeot 107 All Countries / Toyota AYGO All Countries

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653716

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on order - 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota AYGO's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota AYGO. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota AYGO Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard, to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the angled edge on the lower part of the Proclip Car Bracket Mount into the gap between the stereo and the surrounding panel.



Enlarge image

2. Press forwards on the Proclip Car Bracket Mount and hook the angled upper edge into the gap next to the gap opener.




Enlarge image

3. Press downwards on top of the Proclip Car Bracket Mount so the angled edge goes all the way into the gap. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place







Citroen C1 for All Countries

Peugeot 107 for All Countries

Toyota AYGO for All Countries






Brodit ProClip for Toyota AYGO Angled Car Bracket Mount #855051

Citroen C1 All Countries / Peugeot 108 All Countries / Toyota AYGO All Countries

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 855051

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

ONLY for models with ACC.

The Proclip Car Bracket Mount is a mounting bracket for the Toyota AYGO's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota AYGO. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota AYGO Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read the instructions and look at the pictures before installing the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Insert the thin end of the enclosed gap opener by the edge of the frame surrounding the center console control panel, to widen the gap. Peel off the adhesive tape cover on the Proclip Car Bracket Mount.



Enlarge image

2. Insert the angled left edge of the Proclip Car Bracket Mount into the gap next to the gap opener. Push inward/rightward on the Proclip Car Bracket Mount so the angled edge goes all the way into the gap. Remove the gap opener.




Enlarge image

3. Press forward on the right part of the Proclip Car Bracket Mount so the angled edge hooks into the gap on the side of the center console.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Citroen C1 for All Countries

Peugeot 108 for All Countries

Toyota AYGO for All Countries






Brodit ProClip for Toyota AYGO Angled Car Bracket Mount #655051

Citroen C1 All Countries / Peugeot 108 All Countries / Toyota AYGO All Countries

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 655051

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

ONLY for models with ACC.

The Proclip Car Bracket Mount is a mounting bracket for the Toyota AYGO's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota AYGO. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota AYGO Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read the instructions and look at the pictures before installing the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Insert the thin end of the enclosed gap opener by the edge of the frame surrounding the center console control panel, to widen the gap. Peel off the adhesive tape cover on the Proclip Car Bracket Mount.



Enlarge image

2. Insert the angled right edge of the Proclip Car Bracket Mount into the gap next to the gap opener. Push inward/leftward on the Proclip Car Bracket Mount so the angled edge goes all the way into the gap. Remove the gap opener.




Enlarge image

3. Press forward on the left part of the Proclip Car Bracket Mount so the angled edge hooks into the gap on the side of the center console.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Citroen C1 for All Countries

Peugeot 108 for All Countries

Toyota AYGO for All Countries






Brodit ProClip for Toyota AYGO Angled Car Bracket Mount #855035

Citroen C1 All Countries / Peugeot 108 All Countries / Toyota AYGO All Countries

Our Price: 15.50 (13.20 ex Vat.)

Item Number: 855035

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

NOT for models with ACC.

The Proclip Car Bracket Mount is a mounting bracket for the Toyota AYGO's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota AYGO. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota AYGO Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read the instructions and look at the pictures before installing the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel of the adhesive tape cover on the Proclip Car Bracket Mount. Place the angled left edge of the Proclip Car Bracket Mount by the edge of the frame surrounding the center console control panel.



Enlarge image

2. Push inward/rightward on the Proclip Car Bracket Mount so the angled edge goes all the way into the gap.




Enlarge image

3. Press forward on the right part of the Proclip Car Bracket Mount so the angled edge hooks into the gap on the side of the center console.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Citroen C1 for All Countries

Peugeot 108 for All Countries

Toyota AYGO for All Countries






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.