Toyota

 
 

 
 
 


Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 653985

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

NOT for models with factory navigation.

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Auris Full Hybrid's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Auris Full Hybrid. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Auris Full Hybrid Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Peel off the adhesive tape cover on the Proclip Car Bracket Mount. Press the thin end of the enclosed gap opener into the gap between the control panel and the surrounding frame, to widen the gap. Open the glove compartment. Press the angled edge on the left part of the Proclip Car Bracket Mount into the gap between the glove compartment and the dashboard.



Enlarge image

2. Press/slide the Proclip Car Bracket Mount downward in the gap until it reaches a stop.




Enlarge image

3. Press the angled edge on the right part of the Proclip Car Bracket Mount into the gap below the gap opener. Press on the Proclip Car Bracket Mount so the adhesive tape attaches and the angled edges go all the way into the gap. Pull out the gap opener. Close the glove compartment.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Auris for UK
Toyota Auris Full Hybrid for UK






Brodit ProClip for Toyota Auris Full Hybrid Center Car Bracket Mount #653984

Toyota Ascent Australia / Toyota Auris UK / Toyota Auris Full Hybrid UK / Toyota Corolla Australia / Toyota Seca Australia

Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 653984

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Auris Full Hybrid's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Auris Full Hybrid. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Auris Full Hybrid Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enlcosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adheisve tape covers on the Proclip Car Bracket Mount. Place the angled edge on the upper part of the Proclip Car Bracket Mount onto the dashboard next to the center console. Press down on top of the Proclip Car Bracket Mount, in the same time pull it toward you so the angled upper edge hooks into the gap between the dashboard and the center console.



Enlarge image

2. Pull the lower part of the Proclip Car Bracket Mount toward you.




Enlarge image

3. Press the lower part of the Proclip Car Bracket Mount downward and hook the angled edge under the upper edge of the air vent.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Ascent for Australia
Toyota Auris for UK
Toyota Auris Full Hybrid for UK
Toyota Corolla for Australia
Toyota Seca for Australia






Brodit Mounting bracket for Toyota Auris Full Hybrid Center mount High #213514

Toyota Auris Europe / Toyota Auris Full Hybrid Europe

Our Price: £33.94 (£28.90 ex Vat.)

Item Number: 213514

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

No Description available - Please call 01759 371275 for more information


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Auris Full Hybrid Vehicles. This is how you fit your Mounting bracket mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the product.  



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the mount is to be installed. Press the thin end of the enclosed gap openers into the gap between the frame surrounding the control panel and the dashboard, to widen the gap. Peel off the adhesive tape covers on the mount.



Enlarge image

2. Press the angled edge on the lower part of the mount into the gap between the gap openers. Press downward on the lower part of the mount so the angled edge goes all the way into the gap. Pull out the gap opener.




Enlarge image

3. Press the gap openers into the gap between the frame surrounding the air vent and the dashboard. Hook the angled edge on the upper part of the mount into the gap between the gap openers. Press downward on top of the mount so the angled edge goes all the way into the gap. Pull out the gap openers.



Enlarge image

4. The mount is in place.







Toyota Auris for Europe
Toyota Auris Full Hybrid for Europe






Brodit ProClip for Toyota Auris Full Hybrid Center Car Bracket Mount #855164

Scion iM USA / Toyota Auris Europe / Toyota Auris Full Hybrid Europe

Our Price: £16.48 (£14.03 ex Vat.)

Item Number: 855164

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket that you attach onto the Toyota Auris Full Hybrid's dashboard. It provides a perfect mounting platform for mobile phones, or other devices that you want to have within easy reach in the car. Safe, neat and convenient!
 
The Proclip Car Bracket Mount has a perfect fit, it is custom made for each Toyota Auris Full Hybrid to ensure a secure base for installations. And the Proclip Car Bracket Mount is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed instructions.
 
View demo video 


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Auris Full Hybrid Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before installing the Proclip Car Bracket Mount.



Enlarge image

1. Insert the thin end of the enclosed angled gap opener into the gap on the upper side of the air vent, to widen the gap. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Remove the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Insert the lower angled edge of the Proclip Car Bracket Mount into the gap between the silver trim and the panel surrounding the air vent.




Enlarge image

3. Flex the upper part of the Proclip Car Bracket Mount downward and insert the angled upper edge of the Proclip Car Bracket Mount into the gap next to the gap opener. Remove the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Scion iM for USA

Toyota Auris for Europe
Toyota Auris Full Hybrid for Europe






Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 655164

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 5

The Proclip Car Bracket Mount is a mounting bracket that you attach onto the Toyota Auris Full Hybrid's dashboard. It provides a perfect mounting platform for mobile phones, or other devices that you want to have within easy reach in the car. Safe, neat and convenient!
 
The Proclip Car Bracket Mount has a perfect fit, it is custom made for each Toyota Auris Full Hybrid to ensure a secure base for installations. And the Proclip Car Bracket Mount is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed instructions.
 
View demo video 


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Auris Full Hybrid Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before installing the Proclip Car Bracket Mount.



Enlarge image

1. Insert the thin end of the enclosed angled gap opener into the gap on the upper side of the air vent, to widen the gap. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Remove the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Insert the lower angled edge of the Proclip Car Bracket Mount into the gap between the silver trim and the panel surrounding the air vent.




Enlarge image

3. Flex the upper part of the Proclip Car Bracket Mount downward and insert the angled upper edge of the Proclip Car Bracket Mount into the gap next to the gap opener. Remove the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Auris for UK
Toyota Auris Full Hybrid for UK






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.