Toyota

 
 

 
 
 


Our Price: 15.20 (12.94 ex Vat.)

Item Number: 853212

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Avensis's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Avensis. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Avensis Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1. Attaching piece (the smallest part) Part 2. Proclip Car Bracket Mount face plate



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press the angled edge on Part 1 into the gap below the gap opener.



Enlarge image

2. Press forwards and o the right on Part 1, away from the steering wheel, so the angled edge hooks behind the control panel and the adhesive tape attaches to the dashboard. Pull out the gap opener.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape covers on Part 2. Place Part 2 over Part 1 so the left parts on Part 2 (with adhesive tape) attach to the control panel above and below the button. Adjust Part 1 upwards/downwards in the gap so the holes match the holes in Part 2. Screw Part 2 onto Part 1 with the enclosed screws. NOTE! Screw the screws straight into Part 1, in the same angle as Part 1.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Avensis for Europe






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 853211

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Avensis's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Avensis. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Avensis Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the curved edge on the lower part of the Proclip Car Bracket Mount into the gap between the control panel and the panel.








Toyota Avensis for Europe






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 852846

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Avensis's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Avensis. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Avensis Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1: Attaching piece. Part 2: Proclip Car Bracket Mount faceplate.



Enlarge image

1. Press the enclosed gap openers into the gap between the dashboard and the frame surrounding the control panel. Peel off the cover of the adhesive tape on Part 1. Press the angled edge of Part 1 into the gap between the gap openers. Push Part 1 away from the steering wheel, so the angled edge of Part 1 hooks under/behind the console frame and the adhesive sticks to the dashboard.



Enlarge image

2. Pull out the gap openers. Press on the frame surrounding the control panel so it snaps back into place.




Enlarge image

3. Press a screw driver through the predrilled holes on Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto part 1 so the holes match up. Screw the enclosed holes into the holes in Part 2.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Avensis for Europe






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 852845

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Avensis's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Avensis. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Avensis Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1: Attaching piece. Part 2: Proclip Car Bracket Mount faceplate.



Enlarge image

1. Press the enclosed gap opener into the gap between the dashboard and the frame surrounding the control panel. Peel off the cover of the adhesive tape on Part 1. Press the angled edge of Part 1 into the gap below the gap opener. Push Part 1 away from the steering wheel, so the angled edge of Part 1 hooks under/behind the console frame and the adhesive sticks to the dashboard.



Enlarge image

2. Pull out the gap opener. Press on the frame surrounding the control panel so it snaps back into place.




Enlarge image

3. Press a screw driver through the predrilled holes on Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto part 1 so the holes match up. Screw the enclosed holes into the holes in Part 2.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Avensis for Europe






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 852535

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Avensis's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Avensis. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Avensis Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.



Enlarge image

1. Press upper part of the Proclip Car Bracket Mount, with groove, into gap between the panel frame and the padded dashboard at pos. 1. Press until you hear/feel it snaps into place.



Enlarge image

2. Press the enclosed gap opener into the gap between the air vent panel and the surrounding panel frame at pos. X. to widen the gap. Then press the lowerpart of the Proclip Car Bracket Mount, with grooved edge, into the gap next to the gap opener.




Enlarge image

3. Slide the Proclip Car Bracket Mount to the left to pos. 2. Pull out the gap opener.







Toyota Avensis for Europe






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.